Renesas BB506M Built in biasing circuit mos fet ic uhf rf amplifier Datasheet

BB506M
Built in Biasing Circuit MOS FET IC
UHF RF Amplifier
REJ03G1604-0100
Rev.1.00
Nov 26, 2007
Features
• Built in Biasing Circuit; To reduce using parts cost & PC board space.
• High gain
PG = 24 dB typ. (f = 900 MHz)
• Low noise
NF = 1.4 dB typ. (f = 900 MHz)
• Low output capacitance
Coss = 1.1 pF typ. (f = 1 MHz)
• Provide mini mold packages: CMPAK-4 (SOT-343mod)
Outline
RENESAS Package code: PLSP0004ZA-A
(Package name: MPAK-4)
2
3
1
4
Notes:
1. Source
2. Gate1
3. Gate2
4. Drain
1. Marking is “FS-“.
2. BB506M is individual type number of RENESAS BBFET.
Absolute Maximum Ratings
(Ta = 25°C)
Item
Drain to source voltage
Gate1 to source voltage
Symbol
VDS
VG1S
Gate2 to source voltage
VG2S
Drain current
Channel power dissipation
Channel temperature
Storage temperature
Ratings
6
+6
–0
+6
–0
30
300
150
–55 to +150
ID
PchNote3
Tch
Tstg
Unit
V
V
V
mA
mW
°C
°C
Notes: 3. Value on the glass epoxy board (50 mm × 40 mm × 1 mm).
This device is sensitive to electro static discharge.
REJ03G1604-0100
Page 1 of 8
Rev.1.00
Nov 26, 2007
An adequate careful handling procedure is requested.
BB506M
Electrical Characteristics
(Ta = 25°C)
Item
Drain to source breakdown
voltage
Gate1 to source breakdown
voltage
Gate2 to source breakdown
voltage
Gate1 to source cutoff
current
Gate2 to source cutoff
current
Gate1 to source cutoff
voltage
Gate2 to source cutoff
voltage
Drain current
Symbol
V(BR)DSS
Min
6
Typ
—
Max
—
Unit
V
Test Conditions
ID = 200 µA, VG1S = VG2S = 0
V(BR)G1SS
+6
—
—
V
IG1 = +10 µA, VG2S = VDS = 0
V(BR)G2SS
+6
—
—
V
IG2 = +10 µA, VG1S = VDS = 0
IG1SS
—
—
+100
nA
VG1S = +5 V, VG2S = VDS = 0
IG2SS
—
—
+100
nA
VG2S = +5 V, VG1S = VDS = 0
VG1S(off)
0.5
0.8
1.1
V
VDS = 5 V, VG2S = 4 V, ID = 100 µA
VG2S(off)
0.4
0.7
1.0
V
VDS = 5 V, VG1S = 5 V, ID = 100 µA
ID(op)
12
16
20
mA
|yfs|
27
32
38
mS
Input capacitance
Ciss
1.2
1.6
2.0
pF
Output capacitance
Coss
0.7
1.1
1.5
pF
Power gain
PG
19
24
29
dB
Noise figure
NF
—
1.4
2.1
dB
Forward transfer admittance
VDS = 5 V, VG1 = 5 V, VG2S = 4 V
RG = 100 kΩ
VDS = 5 V, VG1 = 5 V, VG2S = 4 V
RG = 100 kΩ, f = 1 kHz
VDS = 5 V, VG1 = 5 V, VG2S = 4 V
RG = 100 kΩ, f = 1 MHz
VDS = 5 V, VG1 = 5V, VG2S = 4 V
RG = 100 kΩ, f = 900 MHz
Bias Circuit for Operating Items (ID(op), |yfs|, Ciss, Coss, NF, PG)
VG2
RG
Gate 2
Drain
A
ID
REJ03G1604-0100
Page 2 of 8
Rev.1.00
Nov 26, 2007
Gate 1
Source
VG1
BB506M
900 MHz Power Gain, Noise Figure Test Circuit
VD
VG1 VG2
C6
C4
C5
R1
R2
C3
R3
RFC
Output (50 Ω)
D
G2
L3
Input (50 Ω)
L4
G1
S
L1
L2
C1
C1, C2
C3
C4 to C6
R1
R2
R3
C2
:
:
:
:
:
:
Variable Capacitor (10 pF MAX)
Disk Capacitor (1000 pF)
Air Capacitor (1000 pF)
100 kΩ
47 kΩ
4.7 kΩ
L2:
L1:
10
3
3
8
10
26
(φ1 mm Copper wire)
Unit : mm
21
L4:
L3:
18
10
10
7
7
29
RFC : f1 mm Copper wire with enamel 4 turns inside dia 6 mm
REJ03G1604-0100
Page 3 of 8
Rev.1.00
Nov 26, 2007
BB506M
Main Characteristics
Typical Output Characteristics
400
ID (mA)
25
300
Drain Current
Channel Power Dissipation Pch* (mW)
Maximum Channel Power Dissipation Curve
200
100
68 kΩ
VG2S = 4 V
VDS = VG1
20
82 kΩ
100 kΩ
15
120 kΩ
10
150 kΩ
5
80
RG
0
50
100
150
0
0
200
1
2
=1
3
kΩ
4
5
Drain to Source Voltage VDS (V)
Ambient Temperature Ta (°C)
* Value on the glass epoxy board (50 mm × 40 mm × 1 mm)
Forward Transfer Admittance
vs. Gate1 Voltage
Drain Current
ID (mA)
25
VDS = 5 V
VG2S = 4 V
RG = 100 kΩ
20
4V
15
3V
10
2V
5
VG2S = 1 V
0
0
1
2
3
4
5
Forward Transfer Admittance
|yfs| (mS)
Drain Current vs. Gate1 Voltage
VDS = 5 V
VG2S =4 V
RG = 100 kΩ
f = 1 kHz
40
4V
30
3V
20
10 V
G2S = 0
2V
1V
0
0
1
2
3
4
Gate1 Voltage VG1 (V)
Gate1 Voltage VG1 (V)
Drain Current vs. Gate Resistance
Input Capacitance vs.
Gate2 to Source Voltage
5
Input Capacitance Ciss (pF)
25
Drain Current ID (mA)
50
20
15
10
5
VDS = VG1 = 5 V
VG2S = 4 V
0
10
5
VDS = 5 V
VG1 = 5 V
RG = 100 kΩ
f = 1 MHz
4
3
2
1
0
100
1000
Gate Resistance RG (kΩ)
REJ03G1604-0100
Page 4 of 8
Rev.1.00
Nov 26, 2007
0
1
2
3
4
Gate2 to Source Voltage VG2S (V)
BB506M
Power Gain vs. Gate Resistance
Noise Figure vs. Gate Resistance
5
40
NF (dB)
VDS = 5 V
VG1 = 5 V
VG2S = 4 V
f = 900 MHz
30
Noise Figure
Power Gain PG (dB)
50
20
10
VDS = 5 V
VG1 = 5 V
VG2S = 4 V
f = 900 MHz
4
3
2
1
0
0
10
100
10
1000
Gate Resistance RG (kΩ)
Noise Figure vs.
Gate2 to Source Voltage
5
NF (dB)
20
15
Noise Figure
Power Gain PG (dB)
25
10
VDS = 5 V
VG1 =5 V
RG = 100 kΩ
f = 900 MHz
0
VDS = 5 V
VG1 = 5 V
RG = 100 kΩ
f = 900 MHz
4
3
2
1
0
1
2
3
4
Gate2 to Source Voltage VG2S (V)
Gain Reduction vs.
Gate2 to Source Voltage
40
Gain Reduction GR (dB)
1000
Gate Resistance RG (kΩ)
Power Gain vs.
Gate2 to Source Voltage
5
100
VDS = 5 V
VG1 = 5 V
RG = 100 kΩ
f = 900 MHz
35
30
25
20
15
10
5
0
0
1
2
3
4
Gate2 to Source Voltage VG2S (V)
REJ03G1604-0100
Page 5 of 8
Rev.1.00
Nov 26, 2007
1
2
3
4
Gate2 to Source Voltage
VG2S (V)
BB506M
S11 Parameter vs. Frequency
.8
S21 Parameter vs. Frequency
1
Scale: 5 / div.
90°
1.5
.6
60°
120°
2
.4
3
30°
150°
4
5
.2
10
.2
0
.4
.6 .8 1
1.5 2
3 45
180°
0°
–10
–5
–4
–3
–.2
–30°
–150°
–.4
–2
–.6
–.8
–120°
–1.5
–60°
–1
–90°
Test condition: VDS = 5 V, VG1 = 5 V,
VGS2 = 4 V, RG = 100 kΩ
0.05 to 1.05 GHz (0.05 GHz step)
Test condition: VDS = 5 V, VG1 = 5 V,
VGS2 = 4 V, RG = 100 kΩ
0.05 to 1.05 GHz (0.05 GHz step)
S12 Parameter vs. Frequency
90°
S22 Parameter vs. Frequency
Scale: 0.05 / div.
.8
1
1.5
.6
60°
120°
2
.4
3
30°
150°
4
5
.2
10
180°
0°
.2
0
.4
.6 .8 1
1.5 2
3 45
–10
–5
–4
–3
–.2
–30°
–150°
–.4
–2
–120°
–60°
–90°
Test condition: VDS = 5 V, VG1 = 5 V,
VGS2 = 4 V, RG = 100 kΩ
0.05 to 1.05 GHz (0.05 GHz step)
REJ03G1604-0100
Page 6 of 8
Rev.1.00
Nov 26, 2007
–.6
–.8
–1.5
–1
Test condition: VDS = 5 V, VG1 = 5 V,
VGS2 = 4 V, RG = 100 kΩ
0.05 to 1.05 GHz (0.05 GHz step)
BB506M
S parameter
(VDS = 5 V, VG1 = 5 V, VG2S = 4 V, RG = 100 kΩ, Zo = 50 Ω)
Freq
(MHz)
S11
S21
S12
S22
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
Mag
0.995
0.991
0.992
0.987
0.984
0.981
0.975
0.967
0.964
0.958
0.951
0.939
0.933
0.922
0.916
0.900
Deg
-3.3
-6.2
-9.3
-12.4
-15.5
-18.6
-21.7
-24.8
-27.9
-30.8
-33.9
-37.0
-40.3
-43.5
-46.5
-49.6
Mag
3.28
3.26
3.28
3.26
3.27
3.24
3.23
3.24
3.22
3.22
3.22
3.20
3.20
3.20
3.19
3.19
Deg
177.9
175.5
173.7
171.3
170.0
167.3
165.8
163.3
161.9
159.4
157.9
155.4
154.1
150.7
150.7
146.7
Mag
0.001
0.001
0.002
0.002
0.004
0.003
0.004
0.004
0.004
0.006
0.006
0.004
0.004
0.007
0.007
0.006
Deg
17.6
75.6
73.8
79.5
116.5
89.6
76.3
87.0
91.9
89.0
100.4
84.2
85.4
80.4
93.5
108.8
Mag
0.991
0.996
0.995
0.997
0.995
0.993
0.992
0.989
0.991
0.987
0.988
0.985
0.984
0.983
0.981
0.979
Deg
-1.8
-3.6
-5.2
-7.0
-8.6
-10.3
-11.8
-13.9
-15.5
-17.0
-18.9
-20.4
-22.2
-23.7
-25.5
-27.2
850
900
950
1000
0.892
0.883
0.866
0.858
-52.8
-56.2
-59.2
-62.0
3.18
3.18
3.17
3.16
146.4
142.8
142.3
139.8
0.005
0.005
0.006
0.006
122.9
120.3
104.0
121.3
0.978
0.975
0.970
0.970
-28.9
-30.6
-32.3
-33.8
REJ03G1604-0100
Page 7 of 8
Rev.1.00
Nov 26, 2007
BB506M
Package Dimensions
Package Name
MPAK-4
JEITA Package Code
SC-61AA
RENESAS Code
PLSP0004ZA-A
D
Previous Code
MPAK-4 / MPAK-4V
MASS[Typ.]
0.013g
A
e
e2
b1
Q
B
c
B
E
HE
L
A
Reference Dimension in Millimeters
Symbol
Min
Nom Max
LP
L1
A
A3
x M S
b
A
e2
A2
e
I1
A
b5
e1
A1
y S
S
b
b1
I1
c
c
b4
A-A Section
B-B Section
Pattern of terminal position areas
A
A1
A2
A3
b
b1
c
D
E
e
e2
HE
L
L1
LP
x
y
b4
b5
e1
I1
Q
1.0
0
1.0
0.35
0.55
0.1
2.7
1.35
2.2
0.35
0.15
0.25
1.1
0.25
0.4
0.6
0.16
1.5
0.95
0.85
2.8
1.3
0.1
1.2
0.5
0.7
0.26
3.1
1.65
3.0
0.75
0.55
0.65
0.05
0.05
0.55
0.75
1.95
1.05
0.3
Ordering Information
Part Name
BB506MFS-TL-E
Note:
Quantity
3000
Shipping Container
Emboss Taping
For some grades, production may be terminated. Please contact the Renesas sales office to check the state of
production before ordering the product.
REJ03G1604-0100
Page 8 of 8
Rev.1.00
Nov 26, 2007
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2
Similar pages