TCR5SB15～TCR5SB50 TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCR5SB15～TCR5SB50 200mA CMOS Low-Dropout Regulator (Point Regulator) TCR5SB15~TCR5SB50 are single output voltage regulators for general purpose in CMOS process, and these provide low dropout, low bias current, and control function. TCR5SB15~TCR5SB50 perform ON/OFF operation for IC by control pin. Output voltage is fixed from 1.5V to 5.0V by per 0.1V step. Maximum output current is 200mA, and overcurrent protection circuit is designed in. Package sizes are available in SMV (SOT23-5) (SC-74A), and compact ceramic capacitors can be used at input and output. These devices are suitable for use of portable equipment such as cellular phone. Weight: 0.014 g (typ.) Features • Low quiescent current ( IB = 40 μA (typ.) at IOUT = 0 mA ) • Low stand-by current ( IB(OFF) = 0.1 μA (typ.) @ Stand-by mode ) • Low-dropout voltage ( VIN - VOUT = 85 mV (typ.) at TCR5SB30, IOUT = 50 mA ) • High current output ( IOUT = 200 mA (max) ) • High ripple rejection ( R.R = 80 dB (typ) @ IOUT = 10 mA, f =1kHz ) • Low output noise voltage ( VNO = 30 μVrms (typ.) @ TCR5SB30, IOUT = 10 mA, 10 Hz ≦ f ≦ 100 kHz ) • Control voltage can be allowed from -0.3 to 6 V regardless of VIN voltage. • Overcurrent protection • Ceramic capacitors can be used ( CIN = 0.1μF, COUT =1.0 μF ) • Wide range voltage listing (Please see Output Voltage Accuracy at page 4 for variety of the output voltage ) • Small package, SMV (SOT23-5) (SC-74A) • RoHS compatible Pin Assignment (top view) VOUT NC 5 4 1 2 VIN 3 GND CONTROL 1 2007-11-01 TCR5SB15～TCR5SB50 List of Products Number and Marking Marking Products No. Marking Products No. Marking TCR5SB15 1E5 TCR5SB33 3E3 TCR5SB16 1E6 TCR5SB34 3E4 TCR5SB17 1E7 TCR5SB35 3E5 TCR5SB18 1E8 TCR5SB36 3E6 TCR5SB19 1B9 TCR5SB37 3E7 TCR5SB20 2E0 TCR5SB38 3E8 TCR5SB21 2E1 TCR5SB39 3E9 TCR5SB22 2E2 TCR5SB40 4E0 TCR5SB23 2E3 TCR5SB41 4E1 TCR5SB24 2E4 TCR5SB42 4E2 TCR5SB25 2E5 TCR5SB43 4E3 TCR5SB26 2E6 TCR5SB44 4E4 TCR5SB27 2E7 TCR5SB45 4E5 TCR5SB28 2E8 TCR5SB46 4E6 TCR5SB29 2E9 TCR5SB47 4E7 TCR5SB30 3E0 TCR5SB48 4E8 TCR5SB31 3E1 TCR5SB49 4E9 TCR5SB32 3E2 TCR5SB50 5E0 Example: TCR5SB30 (3.0 V output) 3E0 Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Input voltage VIN 6 V Control voltage VCT -0.3~ 6 V Output voltage VOUT -0.3~ VIN + 0.3 V Output current IOUT 200 mA 200 (Note 1) 380 (Note 2) Power dissipation PD Operation temperature range Topr −40~85 °C Tj 150 °C Tstg −55~150 °C Junction temperature Storage temperature range Note: mW Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Unit Ratintg Note 2: Rating at mounting on a board 2 (Glass epoxy board dimmention : 30 mm × 30 mm, Copper pad area : 50 mm ) 2 2007-11-01 TCR5SB15～TCR5SB50 Electrical Characteristics (Unless otherwise specified, VIN =VOUT + 1 V, IOUT = 50 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C) Characteristics Output voltage Symbol Test Condition VOUT Please refer to the Output Voltage Accuracy table VOUT + 0.5 V < = VIN < = 6 V, IOUT = 1 mA mV Reg･load 1 mA < = IOUT < = 150 mA ⎯ 25 75 mV IOUT = 0 mA ⎯ 40 75 μA VCT = 0 V ⎯ 0.1 1.0 μA ⎯ 25 ⎯ ⎯ 30 ⎯ ⎯ 35 ⎯ ⎯ 40 ⎯ Quiescent current IB Stand-by current IB (OFF) TCR5SB15～TCR5SB20 VNO VIN = VOUT + 1 V, TCR5SB21～TCR5SB30 IOUT = 10 mA, 10 Hz < =f< = 100 kHz, TCR5SB31～TCR5SB36 Ta = 25°C TCR5SB37～TCR5SB50 Input voltage Unit 15 Load regulation Temperature coefficient Max 3 Reg･line Dropout voltage Typ. ⎯ Line regulation Output noise voltage Min VIN-VOUT TCVO VIN μVrms Please refer to the Dropout voltage table. −40°C < = Topr < = 85°C ⎯ ⎯ 100 ⎯ TCR5SB15～TCR5SB16 VOUT + 0.33 V ⎯ 6.0 TCR5SB17～TCR5SB18 VOUT + 0.31 V ⎯ 6.0 TCR5SB19～TCR5SB23 VOUT + 0.25 V 6.0 TCR5SB24～TCR5SB27 VOUT + 0.20 V 6.0 TCR5SB28～TCR5SB50 VOUT + 0.19 V ⎯ 6.0 ⎯ 80 ⎯ dB VIN = VOUT + 1 V, IOUT = 10 mA, f = 1 kHz, VRipple = 500 mVp-p, Ta = 25°C ppm/°C V Ripple rejection ratio R.R. Control voltage (ON) VCT (ON) ⎯ 1.5 ⎯ 6.0 V Control voltage (OFF) VCT (OFF) ⎯ 0 ⎯ 0.25 V ⎯ ⎯ 0.1 μA ⎯ ⎯ 0.1 μA VCT = 6.0 V Control current (ON) ICT (ON) Control current (OFF) ICT (OFF) VCT = 0.25 V 3 2007-11-01 TCR5SB15～TCR5SB50 Output Voltage Accuracy (VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C) Product No. Min Typ. Max TCR5SB15 1.47 1.5 1.53 *TCR5SB16 1.56 1.6 1.64 *TCR5SB17 1.66 1.7 1.74 TCR5SB18 1.76 1.8 1.84 TCR5SB19 1.86 1.9 1.94 *TCR5SB20 1.96 2.0 2.04 *TCR5SB21 2.05 2.1 2.15 *TCR5SB22 2.15 2.2 2.25 *TCR5SB23 2.25 2.3 2.35 *TCR5SB24 2.35 2.4 2.45 TCR5SB25 2.45 2.5 2.55 *TCR5SB26 2.54 2.6 2.66 TCR5SB27 2.64 2.7 2.76 TCR5SB28 2.74 2.8 2.86 TCR5SB29 2.84 2.9 2.96 TCR5SB30 2.94 3.0 3.06 TCR5SB31 3.03 3.1 3.17 3.13 3.2 3.27 3.23 3.3 3.37 *TCR5SB34 3.33 3.4 3.47 *TCR5SB35 3.43 3.5 3.57 *TCR5SB36 3.52 3.6 3.68 *TCR5SB37 3.62 3.7 3.78 *TCR5SB38 3.72 3.8 3.88 *TCR5SB39 3.82 3.9 3.98 *TCR5SB40 3.92 4.0 4.08 *TCR5SB41 4.01 4.1 4.19 *TCR5SB42 4.11 4.2 4.29 *TCR5SB43 4.21 4.3 4.39 *TCR5SB44 4.31 4.4 4.49 *TCR5SB45 4.41 4.5 4.59 *TCR5SB46 4.50 4.6 4.70 *TCR5SB47 4.60 4.7 4.80 *TCR5SB48 4.70 4.8 4.90 *TCR5SB49 4.80 4.9 5.00 TCR5SB50 4.90 5.0 5.10 *TCR5SB32 TCR5SB33 Symbol VOUT Unit V Please contact us if prefer products with * sign from above lists 4 2007-11-01 TCR5SB15～TCR5SB50 Dropout Voltage (IOUT = 50 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C) Product No. Min Typ. Max TCR5SB15～TCR5SB16 ⎯ 150 330 TCR5SB17～TCR5SB18 ⎯ 130 310 ⎯ 110 250 TCR5SB24～TCR5SB27 ⎯ 90 200 TCR5SB28～TCR5SB50 ⎯ 85 190 TCR5SB19～TCR5SB23 Symbol VIN-VOUT 5 Unit mV 2007-11-01 TCR5SB15～TCR5SB50 Application Note 1. Recommended Application Circuit 1.0 μF VOUT Control Level Operation HIGH ON LOW OFF 0.1 μF NC VIN GND CONTROL The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor at Vout and Vin pins for stable input/output operation. (Ceramic capacitors can be used) If the control function is not to be used, Toshiba recommend that the control pin is connected to the VIN pin. 2. Power Dissipation Power dissipation of TCR5SBxx series is independent and shows in Absolute Maximum Ratings when it is mounted on the board. Testing size and pattern shows below. Testing Board of Thermal Resistance VOUT NC COUT CIN VIN GND Board material: Glass Epoxy, Board dimension 30 mm × 30 mm 2 Copper area: 50 mm , t = 0.8 mm CONTROL PD – Ta ① 300 Power dissipation PD (mW) 400 200 ② 100 ① Board dimension 30 mm × 30 mm, t = 0.8 mm Copper area 50 mm2, mounted on Glass Epoxy Board ② Unit Rating 0 −40 0 40 Ambient temperature 80 Ta 120 (°C) 3. Ripple Rejection TCR5SBxx series are designed for superior ripple rejection characteristic. Even an output changes with steep 6 2007-11-01 TCR5SB15～TCR5SB50 resistance rate of the power supply voltage, characteristic of Input Transient Response, the ripple rejection shows an extremely superior characteristics. Therefore these devices are suitable for use as RF block for every cellular phone system. Ripple rejection Ratio (TCR5SB30) Input Transient Response (TCR5SB30) 90 Ripple rejection Ratio (dB) 80 70 COUT = 10 μF 3.1 V 50 40 Output Voltage 3.0 V COUT = 2.2 μF 30 COUT = 1 μF 20 Ta = 25°C, CIN = 0.1 μF, VIN = 4.0 V , IOUT = 10 mA Cout = 1μF, VIN: 3.4 V → 3.1 V, Iout = 50 mA Vripple = 500 mVp−p 10 0 10 Input Voltage 3.4 V 60 CIN = none, Ta = 25°C 100 1k Frequency f 10 k 0 100 k 300 k (Hz) 1 2 3 4 5 Time t 6 7 8 9 10 (ms) Attention in Use ● Output Capacitors Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba recommend the ESR of ceramic capacitor is under 10 Ω. ● Mounting The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor. For stable power supply, output capacitor need to mount near IC as much as possible. Also GND pattern need to be large and make the wire impedance small as possible. ● Permissible Loss Please have enough design patterns for expected maximum permissible loss. And under consideration of surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent. ● Overcurrent Protection Circuit Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising device operation. If output pins and GND pins are shorted out, these products might be break down. In use of these products, please read through and understand dissipation idea for absolute maximum ratings from the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design. 7 2007-11-01 TCR5SB15～TCR5SB50 Representative Typical Characteristics 1) Output Voltage vs. Input Voltage TCR5SB18 TCR5SB15 (V) IOUT = 10 mA 50 mA 1.0 Output voltage Output voltage VOUT 1.5 3 CIN = 0.1 μF, COUT = 1 μF VOUT (V) 2.0 150 mA 0.5 0 0 1 2 3 Input voltage 4 VIN 5 CIN = 0.1 μF, COUT = 1 μF 2.5 2 IOUT = 10 mA 1.5 150 mA 1 50 mA 0.5 0 0 6 1 2 Input voltage (V) TCR5SB30 CIN = 0.1 μF, COUT = 1 μF VOUT (V) 5 4 3 2 IOUT = 10 mA 50 mA 1 1 2 VIN 5 6 5 6 (V) CIN = 0.1 μF, COUT = 1 μF 5 4 3 2 IOUT = 10 mA 50 mA 1 150 mA 0 0 4 TCR5SB50 6 Output voltage Output voltage VOUT (V) 6 3 150 mA 3 Input voltage 4 VIN 5 0 0 6 1 2 (V) 3 Input voltage 4 VIN (V) 2) Output Voltage vs. Output Current TCR5SB18 TCR5SB15 1.9 VIN = 2.8 V, CIN = 0.1 μF, COUT = 1 μF CIN = 0.1 μF, COUT = 1 μF (V) VIN = 2.5 V, 1.5 1.4 0 Output voltage Output voltage VOUT VOUT (V) 1.6 20 40 60 80 1.7 0 100 120 140 160 180 200 Output current IOUT 1.8 20 40 60 80 100 120 140 160 180 200 Output current (mA) 8 IOUT (mA) 2007-11-01 TCR5SB15～TCR5SB50 TCR5SB50 TCR5SB30 5.1 VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF CIN = 0.1 μF, COUT = 1 μF 3.0 2.9 0 Output voltage Output voltage VOUT (V) VIN = 4 V, VOUT (V) 3.1 20 40 60 80 4.9 0 100 120 140 160 180 200 Output current IOUT 5.0 (mA) 20 40 60 80 100 120 140 160 180 200 Output current IOUT (mA) 3) Output Voltage vs. Ambient temperature TCR5SB15 TCR5SB18 1.52 1.82 (V) VIN = 2.8 V, CIN = 0.1 μF, COUT = 1 μF VOUT 1.51 Output Voltage Output Voltage VOUT (V) VIN = 2.5 V, 1.5 IOUT = 50 mA 1.49 1.48 −50 −25 0 25 50 Ambient temperature Ta 75 1.8 IOUT = 50 mA 1.79 1.78 −50 100 CIN = 0.1 μF, COUT = 1 μF 1.81 (°C) −25 0 Ambient temperature TCR5SB30 100 (°C) VIN = 6 V, (V) (V) CIN = 0.1 μF, COUT = 1 μF VOUT 3.02 3.0 Output Voltage VOUT Ta 75 5.04 VIN = 4 V, Output Voltage 50 TCR5SB50 3.04 IOUT = 50 mA 2.98 2.96 −50 25 −25 0 25 Ambient temperature 50 Ta 75 5.0 IOUT = 50 mA 4.98 4.96 −50 100 (°C) CIN = 0.1 μF, COUT = 1 μF 5.02 −25 0 25 Ambient temperature 9 50 Ta 75 100 (°C) 2007-11-01 TCR5SB15～TCR5SB50 4) Dropout Voltage vs. Output Current TCR5SB50 TCR5SB30 400 300 VIN - VOUT (mV) CIN = 0.1 μF, COUT = 1 μF, Ta = 85°C 25°C 200 Dropout voltage Dropout voltage VIN - VOUT (mV) 400 -40°C 100 0 0 20 40 60 80 100 120 140 160 180 Output current 5) Quiessrnt Current IOUT CIN = 0.1 μF, COUT = 1 μF, 300 Ta = 85°C 25°C 200 -40°C 100 0 0 200 20 40 60 TCR5SB15 (μA) CIN = 0.1 μF, COUT = 1 μF IB IOUT = 150 mA 80 Quiescent current (μA) IB Quiescent current 200 (mA) TCR5SB18 CIN = 0.1 μF, COUT = 1 μF 60 50 mA 40 0 mA 20 100 IOUT = 150 mA 80 60 50 mA 40 0 mA 20 1 2 3 Input voltage 5 4 VIN 0 6 0 1 (V) 2 3 4 Input voltage VIN TCR5SB30 5 6 (V) TCR5SB50 200 250 200 IB IB (μA) CIN = 0.1 μF, COUT = 1 μF (μA) CIN = 0.1 μF, COUT = 1 μF IOUT = 150 mA Quiescent current Quiescent current IOUT 120 100 0 100 120 140 160 180 vs. InputVoltage 120 0 80 Output current (mA) 100 50 mA 150 IOUT = 150 mA 100 50 mA 50 0 mA 0 0 1 2 3 Input voltage 4 VIN 5 0 mA 0 6 (V) 0 1 2 3 Input voltage 10 4 VIN 5 6 (V) 2007-11-01 TCR5SB15～TCR5SB50 6) Quiessrnt Current vs. Ambient temperature TCR5SB15 TCR5SB18 200 200 COUT = 1μF, Quiescent current IB COUT = 1μF, IB Quiescent current VIN = 2.8 V, CIN = 0.1 μF, (μA) (μA) VIN = 2.5 V, CIN = 0.1 μF, 100 IOUT = 150 mA 50 mA 100 50 mA 0 mA 0 −50 IOUT = 150 mA 0 mA −25 0 25 50 75 Ambient temperature Ta 0 −50 100 (°C) −25 0 50 Ambient temperature Ta TCR5SB30 75 100 (°C) TCR5SB50 200 200 VIN = 6 V, CIN = 0.1 μF, (μA) (μA) VIN = 4 V, CIN = 0.1 μF, COUT = 1μF, 100 Quiescent current IB COUT = 1μF, IB Quiescent current 25 IOUT = 150 mA 50 mA 100 50 mA 0 mA 0 −50 IOUT = 150 mA 0 mA −25 0 25 50 75 Ambient temperature Ta 0 −50 100 (°C) −25 0 25 50 Ambient temperature Ta 75 100 (°C) 7) Overcurrent Protection Characteristics TCR5SB18 2.5 Output voltage VOUT (V) Pulse width = 1 ms 2.0 VIN = 5.0 V 1.5 VIN = 2.8 V VIN = 6.0 V 1.0 0.5 0 0 100 200 300 Output current 400 IOUT 500 600 (mA) 11 2007-11-01 TCR5SB15～TCR5SB50 8) Ripple rejection Raito vs. Frequency (Dependence of Output current) TCR5SB30 90 IOUT = 10 mA Ripple Rejection Raito (dB) 80 IOUT = 30 mA 70 IOUT = 50 mA 60 IOUT = 150 mA 50 40 30 20 VIN = 4.0 V ,Vripple = 500 mVp−p 10 CIN = none, COUT = 1μF Ta = 25°C 0 10 100 1k 10 k Frequency f 100 k 300 k (Hz) 9) Ripple rejection Ratio vs. Input Voltage TCR5SB30 TCR5SB30 90 IOUT = 10 mA ,Vripple = 500 mVp−p 80 CIN = none, COUT = 1μF Ta = 25°C 70 (dB) f = 1 kHz f = 10 kHz 60 Ripple Rejection Ratio Ripple Rejection Ratio (dB) 90 50 f = 100 kHz 40 30 20 10 0 3.1 IOUT = 30 mA ,Vripple = 500 mVp−p 80 CIN = none, COUT = 1μF Ta = 25°C 70 f = 1 kHz 60 50 f = 10 kHz 40 30 f = 100 kHz 20 10 3.2 3.3 Input voltage 3.4 VIN 0 3.1 3.5 (V) 3.2 3.3 Input voltage VIN 3.4 3.5 (V) TCR5SB30 Ripple Rejection Ratio (dB) 90 IOUT = 50 mA ,Vripple = 500 mVp−p 80 CIN = none, COUT = 1μF Ta = 25°C 70 f = 1 kHz 60 50 40 f = 10 kHz 30 20 f = 100 kHz 10 0 3.1 3.2 Input voltage 3.3 3.4 VIN 3.5 (V) 12 2007-11-01 TCR5SB15～TCR5SB50 10) Control Transient Response TCR5SB15 (Turn on wave form) VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA Output voltage VOUT (OFF) (1V/div) Output voltage VOUT (ON) (1V/div) Control voltage VCT (ON) (1V/div) Control voltage VCT (OFF) (1V/div) TCR5SB15 (Turn off wave form) VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA Time t ( 100 μs/div ) Time TCR5SB30 (Turn on wave form) t CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA t ( 100 μs/div ) ( 100 μs/div ) Control voltage VCT (OFF) (1V/div) VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA Output voltage VOUT (OFF) (2V/div) Control voltage VCT (ON) (1V/div) Output voltage VOUT (OFF) (2V/div) t TCR5SB50 (Turn off wave form) VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA t CIN = 0.1 μF, COUT = 1 μF IOUT = 50 mA Time TCR5SB50 (Turn on wave form) Time VIN = 4 V, Output voltage VOUT (OFF) (1V/div) Output voltage VOUT (ON) (1V/div) Control voltage VCT (ON) (1V/div) Control voltage VCT (OFF) (1V/div) TCR5SB30 (Turn off wave form) VIN = 4 V, Time ( 100 μs/div ) ( 100 μs/div ) Time t ( 100 μs/div ) 13 2007-11-01 TCR5SB15～TCR5SB50 11) Load Transient Response Output voltage ⊿ VOUT (50mV/div) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (20mA/div) TCR5SB15 (IOUT = 30m to 1mA) Output current IOUT (20mA/div) TCR5SB15 (IOUT = 1m to 30mA) VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 5 μs/div ) VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 20 μs/div ) TCR5SB15 (IOUT = 50m to 100mA) Output voltage ⊿ VOUT (50mV/div) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (50mA/div) Output current IOUT (50mA/div) TCR5SB15 (IOUT = 100m to 50mA) VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF VIN = 2.5 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 5 μs/div ) TCR5SB30 (IOUT =1m to 30mA) TCR5SB30 (IOUT = 30m to 1mA) Output voltage ⊿ VOUT (50mV/div) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (20mA/div) Output current IOUT (20mA/div) Time t ( 5 μs/div ) VIN = 4 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 10 μs/div ) VIN = 4 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 20 μs/div ) 14 2007-11-01 TCR5SB15～TCR5SB50 TCR5SB30 (IOUT = 50m to 100mA) Output current IOUT (50mA/div) Output voltage ⊿ VOUT (50mV/div) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (50mA/div) TCR5SB30 (IOUT = 100m to 50mA) VIN = 4 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 20 μs/div ) t ( 20 μs/div ) Output current IOUT (20mA/div) TCR5SB50 (IOUT = 30m to 1mA) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (20mA/div) Output voltage ⊿ VOUT (50mV/div) CIN = 0.1 μF, COUT = 1 μF Time TCR5SB50 (IOUT =1m to 30mA) VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 5 μs/div ) VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF Time t ( 20 μs/div ) TCR5SB50 (IOUT = 100m to 50mA) Output voltage ⊿ VOUT (50mV/div) Output current IOUT (50mA/div) Output current IOUT (50mA/div) TCR5SB50 (IOUT = 50m to 100mA) Output voltage ⊿ VOUT (50mV/div) VIN = 4 V, VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF VIN = 6 V, CIN = 0.1 μF, COUT = 1 μF Time Time t ( 5 μs/div ) 15 t ( 5 μs/div ) 2007-11-01 TCR5SB15～TCR5SB50 Package Dimensions Weight: 0.016 g (typ) 16 2007-11-01 TCR5SB15～TCR5SB50 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 17 2007-11-01