Purdy AND6BA Gan ultra bright blue light emission surface mount pkg Datasheet

AND6BA
Ultra Bright LED Lamps
Weight: 2.0
Unit: mm
AND6BA
GaN Ultra Bright Blue Light Emission
Surface Mount Pkg
Features
• RoHS Compliant
• P-LCC-2 package with optical indicator
• Wide viewing angle
• Suitable for vapor-phase refow, infrared refow and wave
solder processes
• Low current operation: 2 mA
• Ideal for (LCD) backlight & light pipe applications
• Compatible with automatic placement equipment
Maximum Ratings (Ta = 25°C)
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.
Characteristics
Symbol
Rating
Unit
Forward Current
IF
30
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
120
mW
Operating Temperature
Range
TOpr
-20 to 80
°C
Storage Temperature
Range
TStg
-30to 90
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
3.8
4.5
V
Reverse Current
IR
VR = 5 V
–
–
50
µA
Luminous Intensity
IV
IF = 20 mA
35
55
–
mcd
Peak Emission Wavelength
lP
IF = 20 mA
–
428
–
nm
Spectral Line Half Width
∆l
IF = 20 mA
–
65
–
nm
Dominant Wavelength
ld
IF = 20 mA
–
466
–
nm
2 q 1/2
IF = 20 mA
–
120
–
degree
Full Viewing Angle
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
3. Absolute secure counter measures against
static electricity and surge should be taken
when handling these products. It is
recommended to use wrist band or antistatic
gloves when handling these LEDs.
Temperature
10 sec. max.
140 - 160°C
230°C max.
more than 2 min.
4°C/sec.
max.
Time
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
7/18/07
AND6BA
GaN Ultra Bright Blue Light Emission Surface Mount Pkg
IF – VF
Ultra Bright LED Lamps
IV – IF
50
1000
Ta = 25°C
Luminous Intensity IV (mcd)
Forward Current IF (mA)
40
30
20
100
10
1
10
2.0
3.0
2.5
3.5
4.0
1
4.5
2
Forward Voltage VF (V)
10
20
100
100
IF = 20 mA
Ta = 25°C
Relative Luminous Intensity
Ta = 25°C
Relative Luminous Intensity
50
Relative Luminous Intensity – Wavelength
IV – TC
1000
5
Forward Current IF (mA)
100
10
75
50
25
1
-20
0
20
40
0
80
60
350
400
450
500
550
Wavelength λ (nm)
Case Temperature TC (°C)
Radiation Pattern
IF – Ta
20°
10°
0°
10°
Ta = 25°C
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
Allowable Forward Current IF (mA)
40
30
20
10
90°
90°
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
100
7/18/07
Similar pages