Panasonic EEFLT0E271R Sp-cap/ conductive polymer aluminum capacitors (specialty polymer aluminum capacitors) Datasheet

SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
Surface Mount Type
Series:
SS, ST, LS, LT, CS, CT
■ Features
● Low profile 1.1 mm, 1.4 mm
● Low ESR(6 m), Large capacitance (SS, ST, LS, LT series)
● Low ESL by structure of SP-Cap 50% ESL of current products.
(LS, LT series)
● High temperature reflow soldering applicable.
(Peak : 260 °C 10s, main heating : 230 °C 40s)
● RoHS directive compliant
■ Specifications
SS
Series & Size Code
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
ST
LS
LT
CS
CT
–40 °C to +105 °C
2 V.DC to 2.5 V.DC
4 V.DC to 6.3 V.DC
180 µF to 220 µF 270 µF to 330 µF 180 µF to 220 µF 270 µF to 330 µF 68 µF to 120 µF 100 µF to 180 µF
Capacitance Tolerance
±20 % (120 Hz / + 20 °C)
DC Leakage Current
I < 0.1 CV (µA) 2minutes
tan δ
< 0.06 (120 Hz/+20 °C)
Rated Working Voltage 1.25 (15 °C to 35 °C)
After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Capacitance change
±10% of initial measured value
Surge Voltage
Endurance
tan δ
< Initial specified value
< Initial specified value
DC leakage current
After storing for 500 hours at 60 °C, 90 %
Capacitance change of initial
measurd value
Moisture resistance
2, 2.5 V.DC
4 V.DC
6.3 V.DC
+70, –20 %
+60, –20 %
+50, –20 %
tan δ
< 200 % of initial specified value
DC leakage current
< Initial specified value
■ Marking
Cap.
Lot No.
■ Dimensions in mm(not to scale)
Polarity bar (Positive)
W.V. code
(Unit : mm)
SS, ST, CS, CT series
(Unit : mm)
LS, LT series
+
+
H
H
-
L
P
P
L
W1
W2
P1
L±0.2
7.3
7.3
W1±0.2 W2±0.1
4.3
4.3
✽ Externals of figure are the reference.
2.4
2.4
+
W2
W2
W2
-
Series &
Size Code
SS, CS
ST, CT
W1
P4
H±0.1
P±0.3
1.1
1.4
1.3
1.3
P3
P2 P1
Series &
L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2
Size Code
LS
7.3 4.3 2.4 1.1 1.3 1.1 0.7 1.4
LT
7.3 4.3 2.4 1.4 1.3 1.1 0.7 1.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEF-2 –
00 Nov. 2012
SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
■ Standard Products
Series &
Size Code
SS
ST
LS
LT
CS
CT
CapaciRated tance
W.V. (±20 %)
L
(V.DC) (µF)
(mm)
2
2.5
2
2.5
2
2.5
2
2.5
4
6.3
4
6.3
220
180
330
270
220
180
330
270
120
68
180
100
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
Case Size
Specification
✽1
W
(mm)
H
(mm)
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
1.1
1.1
1.4
1.4
1.1
1.1
1.4
1.4
1.1
1.1
1.4
1.4
Part number
✽2
Ripple
ESR
current
(Ar.m.s.) (m max.)
3.5
6
3.5
6
3.5
6
3.5
6
3.5
6
3.5
6
3.5
6
3.5
6
2.7
15
2.7
15
2.7
15
2.7
15
✽3
Reflow condition : 260 °C
The number
of
terminals
2
EEFSS0D221R
EEFSS0E181R
EEFST0D331R
EEFST0E271R
EEFLS0D221R
EEFLS0E181R
EEFLT0D331R
EEFLT0E271R
EEFCS0G121R
EEFCS0J680R
EEFCT0G181R
EEFCT0J101R
3
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
Min.
Packaging
Q’ty
(pcs)
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
✽1: Ripple current (100 kHz/ +20 to +105 °C ), ✽2: ESR (100 kHz/+20 °C)
✽3: Please refer to the page of “Mouting Specifications”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEF-3 –
00 Nov. 2012
Similar pages