Mimix CMM1118-QT 11.0-20.0 ghz gaas mmic packaged driver amplifier Datasheet

11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
February 2007 - Rev 08-Feb-07
CMM1118-QT
Features
20 dB Gain
14 dBm P1dB
3x3 QFN Package
Single Power Supply
5-7 V, 90 mA Self Bias
On-Chip ESD Protection
Circuit Description
Mimix Broadband’s 3 stage 11.0 to 20.0 GHz driver
amplifier is packaged in surface mount 3x3 QFN
package. The device is a self-biased, single supply
design with 20 dB gain and 14 dBm P1dB. This MMIC
uses Mimix Broadband’s 0.25um optical pHEMT
process.
Absolute Maximum Ratings
Supply Voltage
RF Input Power
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
+8 V
+10 dBm
-55 ºC to +125 ºC
175 ºC
-40 ºC to +85ºC
Electrical Characteristics (T=25ºC)
Parameter
Frequency Range
Gain
Gain Delta
Output P1dB
Output IP3
Input Return Loss
Current
Supply Voltage
Units
GHz
dB
dB
dBm
dBm
dB
mA
V
CMM1118-QT-0XXX
Min.
Typ.
Max.
11
18
17
19
2
12
13
22
-8
100
7
5
CMM1118-QT-BXXX
Min.
Typ.
Max.
17.7
19.7
17
19
2
3
12
13
22
-8
100
5
7
Typical Parameters
Parameter
Frequency
Gain
IP Return Loss
Op Return Loss
P1dB
OIP3
12
21.5
-10.3
-8
12.3
23.3
14
20.4
-11.2
-18.8
12.3
22.2
Typical
16
19.6
-10.6
-11
15.5
23
18
19.2
-17
-7.5
14.7
23
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
20
20
-5.5
-8
16
22.2
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
February 2007 - Rev 08-Feb-07
CMM1118-QT
Driver Amplifier Measurements
Input Return Loss
Gain
0
25
-5
-10
15
(dB)
Gain (dB)
20
-15
10
-20
5
-25
-30
0
10
12
14
16
18
10
20
12
5volt
6volt
14
16
18
20
18
20
18
20
Frequency (GHz)
Frequency (GHz)
5volt
7volt
Output Return Loss
6volt
7volt
P1dB
20
0
18
16
P1dB (dBm)
-5
(dB)
-10
-15
-20
14
12
10
8
6
4
2
-25
0
10
12
14
16
Frequency (GHz)
-30
10
12
14
16
18
20
5volts
6volts
7volts
Frequency (GHz)
5volt
6volt
7volt
OIP3
Psat
20
30
18
25
OIP3 (dBm)
Psat (dBm)
16
14
12
10
8
20
15
10
6
4
5
2
0
10
12
14
16
18
Frequency (GHz)
5volts
6volts
7volts
20
0
10
12
14
16
Frequency (GHz)
5volts
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
6volts
7volts
Page 2 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
February 2007 - Rev 08-Feb-07
CMM1118-QT
Driver Amplifier Measurements (cont.)
Psat
20
16
18
14
16
Psat (dBm)
P1dB (dBm)
P1dB
18
12
10
8
6
4
14
12
10
8
6
4
2
2
0
0
10
12
14
16
18
25°C
10
12
14
16
18
20
Frequency (GHz)
Frequency (GHz)
-40°C
20
80°C
-40°C
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
25°C
80°C
Page 3 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
February 2007 - Rev 08-Feb-07
CMM1118-QT
Evaluation Board Layout
Package Pin-out Table
Pin1
Pin2
Pin3
Pin4
Pin5
Pin6
Pin7
Pin8
Pin9
Pin10
Pin11
Pin12
Pin13
Pin14
Pin15
Pin16
GND or NC
RF Input
GND or NC
GND or NC
GND or NC
GND or NC
GND or NC
GND or NC
GND or NC
GND or NC
RF Output
GND or NC
Vdd
GND or NC
GND or NC
GND
C1 = 1000pF
C2 = 1 F
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
CMM1118-QT
February 2007 - Rev 08-Feb-07
Package Outline and Assembly
PIN 1
INDICATOR
A
D
A2
1118G
XXXX
XXYY
E
0.00-0.05
A3
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
1.00
±.005
2.00 ±.05
1.40 ±.05
(4 SIDES)
4.00 ±.05
PACKAGE OUTLINE
NOTE:
1. ALL DIMENSIONS ARE IN mm
A
A3
A2
b
K
D
E
e
D2
E2
L
MIN
0.80
0
0.20
0.20
1.50
1.50
0.16
NOM
0.90
0.20 REF
0.65
0.25
3.00 BSC
3.00 BSC
0.50
1.65
1.65
0.26
MAX
1.00
1.00
0.30
-
1.80
1.80
0.36
0.30 ±.005
0.50
BSC
Ordering Information
Part Number for Ordering
CMM1118-QT-0G00
CMM1118-QT-0G0T
PB-CMM1118-0000
Description
Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity
Matte Tin finished RoHS compliant 3x3 QFN in tape and reel
Evaluation Board
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
11.0-20.0 GHz GaAs MMIC
Packaged Driver Amplifier
February 2007 - Rev 08-Feb-07
CMM1118-QT
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter “G” will be used in the part number for
Matte Tin finished RoHSCompliant components and “L” will be used in the part number of NiPdAu finished RoHS
Compliant components in the second position of the part number suffix, as shown below:
Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts
Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts
For those customers not making the change at this time, Mimix/Celeritek will maintain production of current
configurations. For questions and comments e-mail: [email protected].
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Similar pages