TOSHIBA JDV2S07S

JDV2S07S
TOSHIBA DIODE Silicon Epitaxial Planar Type
JDV2S07S
VCO for UHF Band Radio
·
Unit: mm
High Capacitance Ratio : C1V/C4V = 2.3 (typ.)
·
Low Series Resistance : rs = 0.42 Ω (typ.)
·
This device is suitable for use in a small-size tuner.
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Reverse voltage
VR
10
V
Junction temperature
Tj
150
°C
Tstg
-55~150
°C
Storage temperature range
JEDEC
―
JEITA
―
TOSHIBA
Weight: 0.0011 g (typ.)
Electrical Characteristics (Ta = 25°C)
Characteristics
1-1K1A
Symbol
Test Condition
Min
Typ.
Max
Unit
Reverse voltage
VR
IR = 1 mA
10
¾
¾
V
Reverse current
IR
VR = 10 V
¾
¾
3
nA
C1V
VR = 1 V, f = 1 MHz
4.0
4.5
4.9
C4V
VR = 4 V, f = 1 MHz
1.85
2.0
2.35
2.0
2.3
¾
¾
¾
0.42
0.55
W
Capacitance
Capacitance ratio
C1V/C4V
Series resistance
rs
¾
VR = 1 V, f = 470 MHz
pF
Note: Signal level when capacitance is measured: Vsig = 500 mVrms
Marking
D
1
2002-01-23
JDV2S07S
CV – VR
IR – VR
10
f = 1 MHz
Ta = 25°C
(pA)
5
Reverse current IR
(pF)
7
Capacitance CV
100
3
2
1
0
1
2
3
4
5
6
7
Reverse voltage VR
8
9
10
Ta = 80°C
60
1
25
0.1
0.01
0
10
4
8
Reverse voltage VR
(V)
0.4
0.3
0.2
0.1
2
3
Reverse voltage VR
5
(%)
0.5
3
Capacitance change Ratio @C
(9)
Series resistance rs
f = 1 MHz
Ta = 25°C
1
(V)
4
f = 470 MHz
0.6
0.5
16
dC – Ta
rs – VR
0.7
0
0.3
12
2
(V)
2
6V
1
4
0
-1
-2
-3
-4
-40
10
VR = 1 V
-20
0
20
40
60
80
Ambient temperature Ta (°C)
2
2002-01-23
JDV2S07S
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
3
2002-01-23
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.