CDE FCP1210C683J-G2 Surface mount film capacitor Datasheet

Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
The Type FCP’s combination of high capacitance density
and excellent high frequency response makes it a great
choice for wireless and instrumentation applications.
Highlights
♦
♦
♦
Type FCP stacked metallized polyphenelene sulfide (PPS) film capacitors offer high
capacitance per unit volume, stable capacitance and DF over a wide temperature
range, and excellent high frequency performance. Type FCP capacitors conform to
standard EIA 0603, 0805, 1206, 1210, 1913 & 2416 surface mount case sizes and
are packaged on tape and reel.
♦
♦
♦
Stacked metallized polyphenylene sulfide (PPS) film.
High operating temperature to +125 ºC
High capacitance per unit volume
Excellent high frequency performance
Capacitance change from –55 ºC to 105 ºC ≤ ±1.5%
Stable cap and DF over wide temperature range
Specifications
Nominal Capacitance Range:
Capacitance Tolerance:
Rated Voltage:
Dissipation Factor (Tan d):
Operating Temperature Range:
Dielectric Strength:
Insulation Resistance:
Construction:
100 pF to 0.22 µF (1kHz at ≤5 Vrms)
±5% (J) Standard, ±2% (G) Optional
16 Vdc and 50 Vdc
0.6% Max. (1 kHz at ≤5 Vrms)
–55 ºC to +125 ºC (See Voltage derating chart for
0.12 - 0.22 µF above 105 ºC)
175% of rated Vdc for 5 seconds
3000 MΩ Min. at 20 ºC, after 60 seconds (16 Vdc
rated, test 10 Vdc; 50 Vdc rated, test 50 Vdc)
Stacked metallized polyphenylene sulfide (PPS)
film
Life Test:
Capacitors subjected to 1000 hours of maximum
rated temperature and 125% of the rated voltage
will not have any significant visual damage,
thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%,
and IR will be a minimum of 1000 Megohms.
Resistance to Soldering Heat:
Capacitors subjected to a 260 °C reflow soldering
for 5 seconds will not have any significant visual
damage, dielectric strength will be as specified,
the capacitance will be within ±3% of the initial
measured value, DF will be a maximum of .66%,
and IR will be a minimum of 1000 Megohms.
Moisture Resistance:
Capacitors subjected to 1000 hours at 40 °C and
90% to 95% RH and rated voltage will not have any
significant visual damage, will withstand 1.3 times
the rated voltage for one minute, the capacitance
will be within ±2% of the initial measured value,
DF will be a maximum of 0.9%, and IR will be a
minimum of 1000 Megohms.
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd),
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl
Ethers (PBDE).
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Ratings
Capacitance
16 Vdc
Catalog
Part Number
FCP0603C101J-K1
FCP0603C121J-K1
FCP0603C151J-K1
FCP0603C181J-K1
FCP0603C221J-K1
FCP0603C271J-K1
FCP0603C331J-K1
FCP0603C391J-K1
FCP0603C471J-K1
FCP0603C561J-K1
FCP0603C681J-K1
FCP0603C821J-K1
FCP0603C102J-K1
FCP0603C122J-K1
FCP0603C152J-K1
FCP0603C182J-K1
FCP0603C222J-K1
FCP0603C272J-K1
FCP0805C332J-J1
FCP0805C392J-J1
FCP0805C472J-J1
FCP0805C562J-J1
FCP0805C682J-J1
FCP0805C822J-J2
FCP0805C103J-J2
FCP1206C123J-H1
FCP1206C153J-H1
FCP1206C183J-H1
FCP1206C223J-H1
FCP1206C273J-H2
FCP1206C333J-H2
FCP1206C393J-H3
FCP1206C473J-H3
FCP1210C563J-G2
FCP1210C683J-G2
FCP1210C823J-G3
FCP1210C104J-G3
50 Vdc
Case
Code
Catalog
Part Number
FCP0805H101J-J1
FCP0805H121J-J1
FCP0805H151J-J1
FCP0805H181J-J1
FCP0805H221J-J1
FCP0805H271J-J1
FCP0805H331J-J1
FCP0805H391J-J1
FCP0805H471J-J1
FCP0805H561J-J1
FCP0805H681J-J1
FCP0805H821J-J1
FCP0805H102J-J1
FCP0805H122J-J1
FCP0805H152J-J1
FCP0805H182J-J1
FCP0805H222J-J1
FCP0805H272J-J1
FCP1206H332J-H1
FCP1206H392J-H1
FCP1206H472J-H1
FCP1206H562J-H1
FCP1206H682J-H1
FCP1206H822J-H2
FCP1206H103J-H2
FCP1210H123J-G1
FCP1210H153J-G1
FCP1210H183J-G2
FCP1210H223J-G2
FCP1210H273J-G2
FCP1210H333J-G3
FCP1210H393J-G3
FCP1913H473J-E1
FCP1913H563J-E2
FCP1913H683J-E2
FCP1913H823J-E4
FCP1913H104J-E3
(µF)
(nF)
(pF)
.00010
.00012
.00015
.00018
.00022
.00027
.00033
.00039
.00047
.00056
.00068
.00082
.0010
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
.0082
.010
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.100
.010
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
1.00
1.20
1.50
1.80
2.20
2.70
3.30
3.90
4.70
5.60
6.80
8.20
10
12
15
18
22
27
33
39
47
56
68
82
100
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
39000
47000
56000
68000
82000
100000
.12
120
120000
FCP2416H124J-D1
.15
150
150000
FCP2416H154J-D3
.18
180
180000
FCP2416H184J-D4
.22
220
220000
FCP2416H224J-D5
0603
805
1206
1210
Case
Code
0805
1206
1210
1913
2416
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Typical Temperature Characteristics
Typical Frequency Characteristics
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Outline Dimensions
Case
Code
L±0.008
0603
0.063
Outline Dimensions (in.)
W
Case Size
T ±0.008
t
0.032 ±0.006 0.028 ±0.006 0.014 ±0.008
0805
0.079
0.049 ±0.008
1206
0.126
0.063 ±0.008
0.035
0.043
Outline Dimensions (mm)
(metric)
L ±0.2
1608
1.6
W
K1
J1
0.018 ±0.010
2012
2
1.25 ±0.2
0.026 ±0.012
3216
3.2
1.6 ±0.2
1913
2416
0.189
0.236
0.098 ±0.008
0.130 ±0.012
0.161 ±0.012
0.059
1.1
0.45 ±0.25
0.9
1.1
3225
3.2
2.5 ±0.2
1.5
H2
H3
1.1
0.026 ±0.012
J2
H1
0.65 ±0.3
1.5
0.043
0.126
Code
0.9
0.059
1210
Packaging
t
0.80 ±0.15 0.7 ±0.15 0.35 ±0.2
0.035
0.043
T ±0.2
G1
0.65 ±0.3
G2
0.083
2.1
0.055
1.4
F1
0.076
2.0
E2
0.110
0.014 ±0.008
4833
4.8
3.3 ±0.3
2.8
G3
0.35 ±0.2
E3
0.094
2.4
E4
0.071
1.8
D1
0.094
0.110
0.014 ±0.008
6041
6
4.1 ±0.3
0.126
2.4
2.8
0.35 ±0.2
3.2
D3
D4
D5
Pulse Handling Capability
Cap
Voltage
dV/dt
Cap
Voltage
dV/dt
Cap
Voltage
dV/dt
(µF)
(Vdc)
(V/µs)
(µF)
(Vdc)
(V/µs)
(µF)
(Vdc)
(V/µs)
.00010
16
420
.010
16
52
.00082
50
440
.00012
16
390
.012
16
48
.0010
50
400
.00015
16
350
.015
16
43
.0012
50
370
.00018
16
325
.018
16
40
.0015
50
340
.00022
16
295
.022
16
37
.0018
50
310
.00027
16
270
.027
16
33
.0022
50
270
.00033
16
245
.033
16
31
.0027
50
260
.00039
16
225
.039
16
28
.0033
50
240
.00047
16
205
.047
16
26
.0039
50
220
.00056
16
193
.056
16
24
.0047
50
200
.00068
16
175
.068
16
22
.0056
50
190
.00082
16
160
.082
16
20
.0068
50
170
.0010
16
150
.100
16
19
.0082
50
160
.0012
16
135
.00010
50
1100
.010
50
145
.0015
16
123
.00012
50
1050
.012
50
135
.0018
16
115
.00015
50
940
.015
50
120
.0022
16
105
.00018
50
890
.018
50
110
.0027
16
95
.00022
50
800
.022
50
100
.0033
16
86
.00027
50
730
.027
50
94
.0039
16
80
.00033
50
690
.033
50
86
.0047
16
74
.00039
50
610
.039
50
78
.0056
16
68
.00047
50
580
.047 - .10
50
180
.0068
16
62
.00056
50
520
.12 - .22
50
130
.0082
16
58
.00068
50
480
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Vrms vs. Frequency
Typical Applications
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Typical Applications
In PLL circuit applications, FCP SMT film capacitor advantages are tight tolerance on the capacitance value, stable
capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Similar pages