Astrodyne ASD35-5S5 5v input 3 watt modular dc/dc converter Datasheet

asd 3 5
5 V I np u t 3 WAT T Modular DC/DC Converters
series
24-Pin DIP Package
5 Volt Input
500 or 1500V Isolation
Short Circuit Protection
High Efficiency
Input PI Filter
Unit measures 0.8”W x 1.25”L x 0.4”H
Model Number
Output Voltage
Output mAmps
Input Range
Efficiency
SINGLE OUTPUT
ASD35-5S3(H or M)*
ASD35-5S5(H or M)*
ASD35-5S12(H or M)*
ASD35-5S15(H or M)*
3.3 VDC
5 VDC
12 VDC
15 VDC
600
600
250
200
4.5-6.0 VDC
4.5-6.0 VDC
4.5-6.0 VDC
4.5-6.0 VDC
64.00%
70.00%
75.00%
75.00%
4.5-6.0 VDC
4.5-6.0 VDC
4.5-6.0 VDC
70.00%
75.00%
75.00%
DUAL OUTPUT
ASD35-5D5(H or M)*
+/-5 VDC
+/-300
ASD35-5D12(H or M)*
+/-12 VDC
+/-125
ASD35-5D15(H or M)*
+/-15 VDC
+/-100
“H” versions only
* Specifying “H” or “M” designates a choice of Pinouts (Please see Mechanical Specifications) and a choice of
500VDC Isolation (“M” Version) or 1500VDC Isolation (“H” Version).
Order On-Line!
WWW.ASTRODYNE.COM
astrodyne.com
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
asd 3 5
5 V I np u t 3 WAT T Modular DC/DC Converters
INPUT SPECIFICATIONS
Input Voltage Nominal
Input Voltage Range:
Input Filter
GENERAL SPECIFICATIONS
5 VDC
4.5-6.0 VDC
PI Type
Input-Output Isolation
Isolation Resistance
Switching Frequency
Safety
See Selection Chart
Single (10% to FL)
+/- 0.5%
Dual (25% to FL)
+/-1%
(HL-LL)
+/- 0.5%
+/-0.05%/°C
3.3V/5V
100mVp-p max.
12V/15V
1% p-p max.
+/- 2%
(Dual)
+/- 1%
Continuous
See Selection Chart
ENVIRONMENTAL SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage and Current
Load Regulation
Line Regulation
Temperature Coefficient
Ripple/Noise(Single/Dual)
Voltage Accuracy
Voltage Balance
Short Circuit Protection
Efficiency
series
500VDC (“M” Versions)
1500VDC (“H” Versions)
10-9nth Ohm min.
100Khz
UL60950 - “H” Versions Only
Oper. Temperature
Case Temperature
Storage Temperature
Cooling
MTBF
-25 to +71°C
100°C max.
-40 to +100°C *
Free Air Convection
Single O/P
1,249,000 Hrs.
Dual O/P
1,186,000 Hrs.
MIL-HDBK-217F
Ground Benign, 25°C
PHYSICAL SPECIFICATIONS
Case Material
Construction
Weight
Dimensions
All specifications are typical at nominal input, full load, and 25DegC unless
otherwise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNE.COM
Black coated Copper
w. Non-conductive base
Fully Encapsulated
0.5 oz, (13g)
1.25”x0.8”x0.4”
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
asd 3 5
5 V I np u t 3 WAT T Modular DC/DC Converters
series
MECHANICAL DIMENSIONS
NOTE: Pin Size is 0.02” Inch (0.5mm) DIA
All Dimensions In Inches (mm)
Tolerance .xx = +/-0.02, .xxx = +/- 0.010
“M” Version
“H” Version
Pin #
Single
Dual
Single Dual
1
2
3
9
10
11
12
13
14
15
16
22
23
24
+Input
NC
NC
No Pin
-Output
+Output
-Input
-Input
+Output
-Output
No Pin
NC
NC
+Input
+Input
-Output
Common
No Pin
Common
+Output
-Input
-Input
+Output
Common
No Pin
Common
-Output
+Input
No Pin
-Input
-Input
NC
NC
NC
No Pin
No Pin
+Output
NC
-Output
+Input
+Input
No Pin
No Pin
-Input
-Input
Common
NC
-Output
No Pin
No Pin
+Output
NC
Common
+Input
+Input
No Pin
NC = No Connection with Pin
WWW.ASTRODYNE.COM
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
Similar pages