Designed and Manufactured in Germany Specification Type: Rev.: 1 Date: 2016-07-04 AXDA9000 Low Noise Selective Distribution Amplifier in 19” rack (1 HU) Features: Ultra-Low Phase Noise Up to 16 outputs Very high inter-channel and reverse isolation Centre frequencies 5 MHz, 10 MHz or 100 MHz standard, any frequency between 5 MHz and 100 MHz available Best suited to distribute AXTAL 9000 Series references Slim 19” rack with 1 HU Available frequency references for AXDA9000: Item (D)OCXO GPS-disciplined OCXO Rubidium Model Features AXIOM9000 DOCXO option Ultra-low noise Very high stability AXGPS9000 Low noise -11 Stability 10 AXRB9000 Excellent long-term stability GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXDA9000 Rev.1 Drawing D0 Page 1(5) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Parameter min. Available frequencies Standard frequencies RF Input Number of inputs Input impedance Input level operating (Note 2) Input level nominal (Note 2) Input VSWR RF outputs RF output ports Signal waveform Load RL Output VSWR Output level per channel Isolation reverse & output Harmonics Spurious AC Supply voltage VS AC Supply input frequency Power consumption Operating temperature range 5 100 5.000 / 10.000 / 100.000 Enclosure (see drawing) (WxDxH) RF Connectors Weight 483x250x44 BNC female 4 Notes: 1. 2. 3. typ. max. 1 50 +0 +7 +15 +12 1.2 4, 8, 16 Sine wave 50 Unit MHz MHz Ω dBm dBm Ω +16 -60 100 50 230 -10 Recommended level @ nominal frequency Option 1 1.2 +14 100 Condition -50 -90 240 60 20 +60 dBm dB dBc dBc V Hz W °C ±10% @ nominal frequency (Note 3) mm @ Rear plate kg Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated AC input indicator “green” above +5 dBm, AC overload indicator “red” above +16 dBm Unused outputs must be terminated with 50 Ω Absolute Maximum Ratings Parameter AC Supply Voltage VS AC Supply input frequency AC Supply input current Maximum RF input level Load RL Storage Temperature min. max. Unit 90 47 260 63 1 +20 ∞ +70 V Hz A dBm Ω °C 0 -20 Condition Fuse accessible at rear plate No damage Ordering Code Option 1 Revision [Output ports] AXDA9000 4, 8, 16 Rev.1 Example: AXDA9000-16_Rev.1 – 10.000 MHz Model GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Frequency [MHz] 10.000 AXDA9000 Rev.1 Drawing D0 Page 2(5) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Frequency distribution of optional frequency reference AXIOM9000 with AXDA9000 Typical Phase Noise Performance of AXIOM9000-ULN distributed with AXDA9000 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXDA9000 Rev.1 Drawing D0 Page 3(5) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Connections and operation # 1 2 3 4 5 6 7 8 Panel Rear Front Symbol POWER IN FUSE IN OUT POWER SWITCH POWER ON AC INPUT AC OVERLOAD Function AC Supply Input (IEC 60320-1 / C14) 1 A Slow 5x20 mm Fuse RF input RF outputs 4…16* Power Switch ON/OFF LED – Power On Indicator LED – RF Input Indicator LED – RF Overload Indicator *Unused outputs must be terminated with 50 Ω loads GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXDA9000 Rev.1 Drawing D0 Page 4(5) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Handling & Testing Parameter Procedure / Test condition Sinusoidal vibration Random vibration Mechanical shock Handling and Testing DGUV Requirement 3 Tested RoHS-Compliant max. 0.15 mm <10 Hz, 1 g at 10~2000 Hz max. 0.001 g²/Hz, 10~2000 Hz max. 10 g, 11 ms half sine Careful handling. Yes No Yes No Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] Remarks Author Checked 1 D0 04.07.2016 First issue HH BN GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXDA9000 Rev.1 Drawing D0 Page 5(5) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]