VISHAY 40CTQ045-1PBF

VS-40CTQ045SPbF, VS-40CTQ045-1PbF
Vishay High Power Products
Schottky Rectifier, 2 x 20 A
FEATURES
VS-40CTQ045-1PbF
VS-40CTQ045SPbF
•
•
•
•
•
Base
common
cathode
2
Base
common
cathode
2
•
•
2
1 Common
3
Anode cathode Anode
2
1 Common
3
Anode cathode Anode
D2PAK
TO-262
•
•
•
DESCRIPTION
This center tap Schottky rectifier has been optimized for
very low forward voltage drop, with moderate leakage. The
proprietary barrier technology allows for reliable operation
up to 150 °C junction temperature. Typical applications are
in switching power supplies, converters, freewheeling
diodes, and reverse battery protection.
PRODUCT SUMMARY
IF(AV)
2 x 20 A
VR
45 V
150 °C TJ operation
Center tap configuration
Very low forward voltage drop
High frequency operation
High purity, high temperature epoxy
encapsulation for enhanced mechanical
strength and moisture resistance
Guard ring for enhanced ruggedness and long
term reliability
Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
Halogen-free according to IEC 61249-2-21 definition
Compliant to RoHS directive 2002/95/EC
AEC-Q101 qualified
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
VF
20 Apk, TJ = 125 °C (per leg)
TJ
Range
VALUES
UNITS
40
A
45
V
1240
A
0.48
V
- 55 to 150
°C
VS-40CTQ045SPbF
VS-40CTQ045-1PbF
UNITS
45
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
See fig. 5
SYMBOL
TEST CONDITIONS
per leg
VALUES
UNITS
20
IF(AV)
50 % duty cycle at TC = 116 °C, rectangular waveform
per device
40
A
Following any rated load
condition and with rated
VRRM applied
Maximum peak one cycle non-repetitive
surge current per leg
See fig. 7
IFSM
Non-repetitive avalanche energy per leg
EAS
TJ = 25 °C, IAS = 3 A, L = 4.40 mH
20
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
3
A
Repetitive avalanche current per leg
Document Number: 94213
Revision: 15-Mar-10
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
For technical questions, contact: [email protected]
1240
350
www.vishay.com
1
VS-40CTQ045SPbF, VS-40CTQ045-1PbF
Vishay High Power Products Schottky Rectifier, 2 x 20 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
20 A
Maximum forward voltage drop per leg
See fig. 1
VFM (1)
TJ = 25 °C
40 A
20 A
TJ = 125 °C
40 A
Maximum reverse leakage current per leg
See fig. 2
IRM (1)
Threshold voltage
VF(TO)
Forward slope resistance
rt
Maximum junction capacitance per leg
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
TJ = TJ maximum
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
Typical series inductance per leg
LS
Measured lead to lead 5 mm from package body
Maximum voltage rate of change
dV/dt
Rated VR
VALUES
UNITS
0.53
0.68
V
0.48
0.67
3
115
mA
0.27
V
8.72
mΩ
2800
pF
8.0
nH
10 000
V/μs
VALUES
UNITS
- 55 to 150
°C
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case per leg
2.0
RthJC
Maximum thermal resistance,
junction to case per package
DC operation
1.0
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased
Marking device
www.vishay.com
2
0.50
2
g
0.07
oz.
minimum
6 (5)
kgf ⋅ cm
maximum
12 (10)
(lbf ⋅ in)
Approximate weight
Mounting torque
°C/W
Case style
D2PAK
Case style TO-262
For technical questions, contact: [email protected]
40CTQ045S
40CTQ045-1
Document Number: 94213
Revision: 15-Mar-10
VS-40CTQ045SPbF, VS-40CTQ045-1PbF
1000
1000
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 2 x 20 A Vishay High Power Products
100
10
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 150 °C
100
TJ = 125 °C
TJ = 100 °C
10
TJ = 75 °C
1
TJ = 50 °C
0.1
TJ = 25 °C
0.01
0.001
1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
1.8
5
10
15
20
25
30
35
40
45
VR - Reverse Voltage (V)
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
10 000
TJ = 25 °C
1000
100
0
10
20
30
40
50
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
10
1
PDM
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
0.01
0.1
t1
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94213
Revision: 15-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
3
VS-40CTQ045SPbF, VS-40CTQ045-1PbF
150
18
145
16
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay High Power Products Schottky Rectifier, 2 x 20 A
140
DC
135
130
125
120
Square wave (D = 0.50)
80 % rated VR applied
115
110
105
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
14
12
RMS limit
10
8
6
DC
4
2
See note (1)
0
100
0
5
10
15
20
25
0
30
5
10
15
20
25
30
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
10 000
At any rated load condition
and with rated VRRM applied
following surge
1000
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
L
D.U.T.
IRFP460
Rg = 25 Ω
Current
monitor
High-speed
switch
Freewheel
diode
+ Vd = 25 V
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
Note
Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V
(1)
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94213
Revision: 15-Mar-10
VS-40CTQ045SPbF, VS-40CTQ045-1PbF
Schottky Rectifier, 2 x 20 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
VS-
40
C
T
Q
045
S
1
2
3
4
5
6
7
TRL PbF
8
1
-
HPP product suffix
2
-
Current rating (40 A)
3
-
Circuit configuration: C = Common cathode
4
-
T = TO-220
5
-
Schottky “Q” series
6
-
Voltage rating (045 = 45 V)
7
-
S = D2PAK
8
-
None = Tube (50 pieces)
9
-1 = TO-262
TRL = Tape and reel (left oriented - for D2PAK only)
TRR = Tape and reel (right oriented - for D2PAK only)
9
-
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95014
Part marking information
www.vishay.com/doc?95008
Packaging information
www.vishay.com/doc?95032
Document Number: 94213
Revision: 15-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
5
Outline Dimensions
Vishay High Power Products
D2PAK, TO-262
DIMENSIONS FOR D2PAK in millimeters and inches
Conforms to JEDEC outline D2PAK (SMD-220)
(2)(3)
E
B
Pad layout
A
A
(E)
c2
11.00
MIN.
(0.43)
A
(3) L1
4
9.65
MIN.
(0.38)
(D1) (3)
Detail A
D
H
1
2
17.90 (0.70)
15.00 (0.625)
(2)
3
3.81
MIN.
(0.15)
L2
B
B
2.32
MIN.
(0.08)
A
2 x b2
c
2.64 (0.103)
2.41 (0.096)
(3)
E1
C
View A - A
2xb
± 0.004 M B
0.010 M A M B
Plating
2x e
Base
Metal
(4)
b1, b3
H
Gauge
plane
Seating
plane
Lead assignments
Diodes
1. - Anode (two die)/open (one die)
2., 4. - Cathode
3. - Anode
SYMBOL
MILLIMETERS
MIN.
c1 (4)
(c)
B
0° to 8°
MAX.
L3
Lead tip
A1
L
(b, b2)
L4
Section B - B and C - C
Scale: None
Detail “A”
Rotated 90 °CW
Scale: 8:1
INCHES
MIN.
MAX.
NOTES
SYMBOL
MILLIMETERS
MIN.
MAX.
INCHES
MIN.
MAX.
NOTES
A
4.06
4.83
0.160
0.190
D1
6.86
8.00
0.270
0.315
3
A1
0.00
0.254
0.000
0.010
E
9.65
10.67
0.380
0.420
2, 3
E1
7.90
8.80
0.311
0.346
3
b
0.51
0.99
0.020
0.039
b1
0.51
0.89
0.020
0.035
b2
1.14
1.78
0.045
0.070
b3
1.14
1.73
0.045
0.068
c
0.38
0.74
0.015
0.029
c1
0.38
0.58
0.015
0.023
c2
1.14
1.65
0.045
0.065
D
8.51
9.65
0.335
0.380
4
2.54 BSC
0.100 BSC
H
14.61
15.88
0.575
0.625
4
L
1.78
2.79
0.070
0.110
L1
-
1.65
-
0.066
4
L2
1.27
1.78
0.050
0.070
2
L4
L3
Notes
(1) Dimensioning and tolerancing per ASME Y14.5 M-1994
(2) Dimension D and E do not include mold flash. Mold flash shall not
exceed 0.127 mm (0.005") per side. These dimensions are
measured at the outmost extremes of the plastic body
(3) Thermal pad contour optional within dimension E, L1, D1 and E1
(4) Dimension b1 and c1 apply to base metal only
(5) Datum A and B to be determined at datum plane H
(6) Controlling dimension: inch
Document Number: 95014
Revision: 31-Mar-09
e
(7)
0.25 BSC
4.78
5.28
3
0.010 BSC
0.188
0.208
Outline conforms to JEDEC outline TO-263AB
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
www.vishay.com
1
Outline Dimensions
D2PAK, TO-262
Vishay High Power Products
DIMENSIONS FOR TO-262 in millimeters and inches
Modified JEDEC outline TO-262
(Datum A) (2) (3)
E
A
A
c2
B
E
A
(3) L1
Seating
plane
D
1
2 3
C
L2
B
D1 (3)
B
C
L (2)
A
c
3 x b2
3xb
E1
A1
(3)
Section A - A
2xe
Plating
0.010 M A M B
(4)
b1, b3
Base
metal
Lead assignments
Diodes
1. - Anode (two die)/open (one die)
2., 4. - Cathode
3. - Anode
Lead tip
SYMBOL
c1
c
(4)
(b, b2)
Section B - B and C - C
Scale: None
MILLIMETERS
INCHES
MIN.
MAX.
MIN.
MAX.
A
4.06
4.83
0.160
0.190
A1
2.03
3.02
0.080
0.119
b
0.51
0.99
0.020
0.039
b1
0.51
0.89
0.020
0.035
b2
1.14
1.78
0.045
0.070
b3
1.14
1.73
0.045
0.068
c
0.38
0.74
0.015
0.029
c1
0.38
0.58
0.015
0.023
c2
1.14
1.65
0.045
0.065
NOTES
4
4
4
D
8.51
9.65
0.335
0.380
D1
6.86
8.00
0.270
0.315
3
E
9.65
10.67
0.380
0.420
2, 3
E1
7.90
8.80
0.311
0.346
3
e
2.54 BSC
0.100 BSC
L
13.46
14.10
0.530
0.555
L1
-
1.65
-
0.065
L2
3.56
3.71
0.140
0.146
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Dimension D and E do not include mold flash. Mold flash shall not
exceed 0.127 mm (0.005") per side. These dimensions are
measured at the outmost extremes of the plastic body
(3) Thermal pad contour optional within dimension E, L1, D1 and E1
(4) Dimension b1 and c1 apply to base metal only
(5) Controlling dimension: inches
www.vishay.com
2
2
(6)
3
Outline conform to JEDEC TO-262 except A1 (maximum), b
(minimum) and D1 (minimum) where dimensions derived the
actual package outline
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
Document Number: 95014
Revision: 31-Mar-09
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000