DDK CM10-AP10S-M One-touch locking style small sized circular connector Datasheet

One-Touch Locking Style
Small Sized Circular Connectors
CM10 Series (D6) Type
◆ OUTLINE
CM10 series (D6) type is a small sized waterproof circular
connector with push on locking and turnoff unlocking
mechanism. The plug will be easily locked with the
receptacle when you push on. Rotating the coupling ring,
the plug will be unlocked when you need to unmate. The
plug can not be unmated from the receptacle by such
an unexpected force like the cable being pulled. CM10
with (D6) has a solid construction with the metal shell.
The weight of the connector is lighter with the light metal
backshell and the resin clamp nut than the CM10 series
connectors which we had released earlier. CM10 series
Wa t e r p r o o f
IP 67
with (D6) can be used with a wide range of applications
since it is small size and waterproof connector.
◆ FEATURES
◆ SPECIFICATIONS
1. Solid structure with a metal shell
Lock Type
Push-On
2. One touch and reliable locking
mechanism of push on and turnoff
3. With a grounding contact (Position 10)
4. Angle plug available for low-profile
Item
5. Lighter in weight by 30% than CM10
Rated Voltage
Dielectric Withstanding Voltage
200V AC(r.m.s.) Max.
1500V AC(r.m.s.) / 1 minute
Insulation Resistance
-25℃ to +85℃
# 22
Protection Rate
IP67 when mated (Receptacle : Individually waterproof)
Receptacle, Cable Receptacle
RoHS
◆ MATERIAL/FINISH
Plug
Plug
・Crimp:16AWG-20AWG
・Crimp:20AWG-28AWG
・Soldering Use,:16AWG Max. ・Soldering Use,:20AWG Max.
Compliant
Compliant
Item
Receptacle
Plug
Pin Front Insulator
Synthetic Rubber/Black
Socket Cover Insulator
Pin Rear Insulator
Plastic(UL94V-0)/Black
Socket Insulator
Plastic(UL94V-0)/Black
Pin Contact
Copper Alloy/Gold Plating
Fixed Pin
Copper Alloy/Nickel Plating
O Ring(Mounting Side)
Synthetic Rubber/Black
Socket Contact
Copper Alloy/Gold Plating
Receptacle Shell
Zinc Alloy/Nickel Plating
Coupling Ring
Zinc Alloy/Nickel Plating
Retaining Ring
Copper Alloy/Gold Plating
O Ring(Mating Side)
Synthetic Rubber/Black
Ground Lug
Copper Alloy/Gold Plating
Plug Shell
Zinc Alloy/Nickel Plating
Plastic(UL94V-0)/Black
Spring
Stainless Steel
Backshell
Aluminum Alloy/Nickel Plating
Synthetic Rubber/Black
Bushing
Synthetic Rubber/Black
Pin Rear Insulator
Plastic(UL94V-0)/Black
Cable Clamp
Plastic(UL94V-0)/White
Screw
Stainless Steel
Clamp Nut
Plastic(UL94V-0)/Black
Pin Contact
Copper Alloy/Gold Plating
Retaining Ring
Stainless Steel
Receptacle Shell
Zinc Alloy/Nickel Plating
Backshell
Zinc Alloy/Nickel Plating
Bushing
Synthetic Rubber/Black
Pin Front Insulator
Receptacle, Cable Receptacle
・Soldering only, 20AWG max. ・Soldering Use,:20AWG Max
Applicable Wire
Item
900V AC(r.m.s.) / 1 minute
1,000M Ω Min. at 500V DC
Operating Temperature Range
without (D6)
090804
3A Max. / Contact
Conductor Size
mounting
Item
10 Contacts
2 Contacts
Rated Current
Cable Receptacle
Cable Clamp
Plastic(UL94V-0)/White
Clamp Nut
Zinc Alloy/Nickel Plating
Ground Lug
Copper Alloy/Gold Plating
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
CM10 Series
Unit:mm
○ 10-Contact Plug
・Contact Style : Socket
・Termination:Solder or Crimp
・The contact is sold separately.
Right Angle Plug
34
φ21
φ21
(φ21)
Straight Plug
(51.4)
(32.5)
Straight Plug P/N
Right Angle Plug P/N
CM10-SP10S-S(D6)
CM10-AP10S-S(D6)
Cable Outside Dia.
φ 4.0 〜φ 6.0
CM10-SP10S-M(D6)
CM10-AP10S-M(D6)
φ 6.0 〜φ 9.0
CM10-SP10S-L(D6)
CM10-AP10S-L(D6)
φ 9.0 〜φ 11.6
Note: The applicable cable outside diameter is in the case of cabtyre cable.
Please contact the nearest sales office when you use a different cable.
Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue.
○ Contact of 10-Contact Plug
Loose Piece Contact
Applicable Wire
Contact P/N
(100 pcs in 1 bag )
Item
Crimping Type
Soldering Type
Hand Tool P/N
Conductor Size
Insulation Dia.
CM10-#22SC(C1)(D8)-100
20 〜 22AWG
φ 1.10 〜φ 1.87
357J-50446T
CM10-#22SC(C2)(D8)-100
23 〜 28AWG
φ 0.80 〜φ 1.50
357J-50447T
CM10-#22SC(S1)(D8)-100
20 AWG Max.
Extraction Tool P/N
357J-50548T
1. The packaging specification is 100 pcs of contacts per bag for sale.
2.Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to
the cable or crimping the contacts with the cable.
Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only)
Contact P/N
Applicable Wire
( 5,000 pcs on 1 reel )
Conductor Size
The semi-automatic crimping machine is required
when you terminate the reel contacts.
Semi-Automatic Crimping Machine
Insulation Dia.
1set P/N
Applicator
Extraction Tool P/N
P/N
CM10-#22SC(C1)(D8)-5000
20 〜 22AWG
φ 1.10 〜φ 1.87
AP-A50539T
AP-A50539T-1
CM10-#22SC(C2)(D8)-5000
23 〜 28AWG
φ 0.80 〜φ 1.50
AP-A50540T
AP-A50540T-1
357J-50548T
1. Both of AP50539T and AP50540T are the set part numbers which include both of the semi-automatic crimping machines and
the applicators (stripper crimpers).
2. Each of AP50539T and AP50540T contains exactly the same semi-automatic machine.
Therefore if you change the applicator, you can terminate both of CM10-#22SC(C1)(D8)-5000 and CM10-#22SC(C2)(D8)-5000 by one
semi-automatic crimping machine.
CM10-#22SC(C2)(D8)- □□□□
15.6
15.6
15.6
6
6
2.45
6
2.65
CM10-#22SC(S1)(D8)- □□□□
1.65
CM10-#22SC(C1)(D8)- □□□□
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
CM10 Series
Unit:mm
○ 2-Contact Plug
・Contact Style : Socket
・Termination:Solder or Crimp
・The contact is sold separately.
Right Angle Plug
1
2
1
2
34
φ21
φ21
(φ21)
Straight Plug
(51.4)
(32.5)
Straight Plug P/N
Right Angle Plug P/N
Cable Outside Dia.
CM10-SP2S-S(D6)
CM10-AP2S-S(D6)
φ 4.0 〜φ 6.0
CM10-SP2S-M(D6)
CM10-AP2S-M(D6)
φ 6.0 〜φ 9.0
CM10-SP2S-L(D6)
CM10-AP2S-L(D6)
φ 9.0 〜φ 11.6
Note: The applicable cable outside diameter is in the case of cabtyre cable.
Please contact the nearest sales office when you use a different cable.
Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue.
○ Contact of 2-Contact Plug
Loose Piece Contact
Contact P/N
Item
Applicable Wire
( 100 pcs in 1 bag )
Conductor Size
Crimping Type
CM10-#22SC(C3)(D8)-100
16 〜 20AWG
Soldering Type
CM10-#22SC(S2)(D8)-100
16AWG
Insulation Dia.
φ 1.87 〜φ 2.45
Hand Tool P/N
Extraction Tool P/N
357J-50448T
357J-50548T
Max.
1. The packaging specification is 100 pcs of contacts per bag for sale.
2.Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to
the cable or crimping the contacts with the cable.
Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only)
Contact P/N
Applicable Wire
( 4,000 pcs on 1 reel )
CM10-#22SC(C3)(D8)-4000
The semi-automatic crimping machine is required
when you terminate the reel contacts.
Semi-Automatic Crimping Machine
Conductor Size
Insulation Dia.
1set P/N
16 〜 20AWG
φ 1.87 〜φ 2.45
AP-A50541T
Applicator
Extraction Tool P/N
P/N
AP-A50541T-1
357J-50548T
1. Due to the construction of CM10-#22SC-(C3)(D8)-4000 you can only make the crimping process by AP50541T.
So the process of striping cable shall be made in advance.
2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper).
CM10-#22SC(C3)(D8)- □□□□
CM10-#22SC(S2)(D8)- □□□□
15.6
15.6
6
4
φ2.1
6
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
CM10 Series
Unit:mm
○ Straight Cable Receptacle
Cable Outside Dia.
CM10-CR10P-S
φ 4.0 〜φ 6.0
CM10-CR10P-M
φ 6.0 〜φ 9.0
CM10-CR10P-L
φ 9.0 〜φ 11.6
・Pin contact style only
・Soldering termination only
・Conductor Size : 20 AWG Max.
・ Insulation Dia. : φ 1.87 Max.
・Contact No.10 grounded to shell with ground lug
3
1
10
8
7
18.9
21.0
10 Pins
P/N
4
(51.3)
P/N
Cable Outside Dia.
CM10-CR2P-S
φ 4.0 〜φ 6.0
CM10-CR2P-M
φ 6.0 〜φ 9.0
CM10-CR2P-L
φ 9.0 〜φ 11.6
・Pin contact style only
・Soldering termination only
・Conductor Size : 20 AWG Max.
18.9
21.0
2 Pins
(51.3)
Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use
a different cable.
○ Receptacle
P/N
10 Pins
P/N
2 Pins
CM10-R10P(D3)-01
・Pin contact style only
・Soldering termination only
・Conductor Size : 20 AWG Max.
・Individually waterproof
CM10-R2P(D3)-01
・Pin contact style only
・Soldering termination only
・Conductor Size : 20 AWG Max.
・Individually waterproof
Contact No.10 grounded to shell with ground lug
(7.9)
Main key positon mark
4
10
10
1
1
7
8
1
φ15.3
8
3
φ12
7
φ15.3
3
5.2
φ12
1
4
Main key positon mark
(7.9)
5.2
2
2
DDK
DDK
1.7
4-φ3.2
(13.6)
□23.4
+0.25
0
(13.6)
+0.2
□23.4
8.4
□17.26
φ12 +0.1
4-φ3.2
1.7
8.4
φ16.2
□17.26
(
□17.26
0.1
)
0
1-0.1
3 min.
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
4
Mounting Dimensions
4-M3
CM10 Series
Unit:mm
○ Mated Dimensions
Receptacle + Straight Plug
Receptacle + Right Angle Plug
23.4
φ21
(33.5)
φ21
(44.3)
(52)
23.4
○ Dust Cap for Receptacle & Cable Receptacle
P/N
7
φ20.7
Material : Plastic
φ14.8
φ16.3
CM10-R-DC
DDK
Color : Red
2
7.9
○ Supporting Cover
Straight Plug
Right Angle Plug
P/N
CM10-AP-D-CV
30
22.8
35.6
(53)
P/N
CM10-SP-CV
32
40
(27)
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
5
45
Similar pages