AZETTLER AZ770-1C-6D Spdt subminiature power relay Datasheet

AZ
AZ770
SPDT SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Small footprint
5 kV dielectric strength, 10 kV surge
Class B insulation standard
8 mm creepage and clearance
Epoxy sealed version available
5 Amp switching
High temperature 105 C and high current 10A version
avilable ( UL Pending )
• UL, CUR file E44211, VDE 40006815
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 5 A 240 VAC Res.
Max. switched power: 150 W (SPST-NO) standard
1250 VA (SPST-NO) standard
90 W (SPDT)
750 VA (SPDT)
Max. switched current: 5 A AC SPST-NO standard
5 A DC SPST-NO standard
3 A AC/DC SPST-NO sensitive
3 A AC/DC SPDT
Max. switched voltage: 150* VDC or 380 VAC
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
4 ms at nominal coil voltage
(with no coil suppression)
Surge Voltage
Coil to contact
10,000V (at 1.2x50 µ s)
*Note: If switching voltage is greater than 30 VDC, special
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 90°C (194°F), standard
-40°C (-40°F) to 105°C (221°F), sensitive
-40°C (-40°F) to 130°C (266°F)
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
Form A (N.O.)
5 A at 250 VAC, Res., 100k cycles
5 A at 30 VDC, Res., 100k cycles
1/8 HP, 125 / 250 VAC, 100k cycles
3 A at 250 VAC, 0.4 PF., 100k cycles
C300 Pilot Duty, 125 / 250 VAC, 100k cycles
TV-2, 120 VAC
Form C
3 A at 250 VAC, Res. 100k cycles
3 A at 30 VDC, Res, 100k cycles
VDE
Form A and Form C
5 A at 250 VAC, 100k cycles
Material
Silver nickel, gold plating available
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
253 mW standard
113 mW sensitive
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
Temperature
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Storage
Vibration
0.062" DA at 10–55 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
4.6 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. 130°C (266°F)
10/31/08W
AZ
AZ770
RELAY ORDERING DATA
STANDARD RELAYS – TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Must Operate
VDC
2.25
ORDER NUMBER*
Max. Continuous
VDC
3.9
Coil
Resistance
20 ± 10%
Form A (SPST)
Form C (SPDT)
AZ770–1A–3D
AZ770–1C–3D
5
3.75
6.5
55 ± 10%
AZ770–1A–5D
AZ770–1C–5D
6
4.5
7.8
80 ± 10%
AZ770–1A–6D
AZ770–1C–6D
9
6.75
11.7
180 ± 10%
AZ770–1A–9D
AZ770–1C–9D
12
9.0
15.6
320 ± 10%
AZ770–1A–12D
AZ770–1C–12D
18
13.5
23.4
720 ± 10%
AZ770–1A–18D
AZ770–1C–18D
24
18.0
31.2
1,280 ± 10%
AZ770–1A–24D
AZ770–1C–24D
48
36.0
62.4
5120 ± 15%
AZ770–1A–48D
AZ770–1C–48D
SENSITIVE RELAYS – TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Must Operate
VDC
2.25
ORDER NUMBER*
Max. Continuous
VDC
5.1
Coil
Resistance
45 ± 10%
Form A (SPST)
AZ770–1A–3DS
5
3.75
8.5
125 ± 10%
AZ770–1A–5DS
6
4.5
10.2
180 ± 10%
AZ770–1A–6DS
9
6.75
15.3
400 ± 10%
AZ770–1A–9DS
12
9.0
20.4
720 ± 10%
AZ770–1A–12DS
18
13.5
30.6
1600 ± 10%
AZ770–1A–18DS
24
18.0
40.8
2800 ± 10%
AZ770–1A–24DS
*Add suffix “E” for epoxy sealed version. Add suffix “K” for Type 2 footprint. Add suffix “G” for gold plated contacts. Add “H” after AZ770 for high
temperature version ( sensitive only ). Add “T” after AZ770 for high current version ( sensitive only).
MECHANICAL DATA
.703 Max
[17.85]
.407 Max
[10.35]
PCB layout
.494 Max
[12.55]
.60
[15.24]
5-.05
[Ø1.3]
.157
[4]
.016
[0.4]
2-.012
[0.3]
D .02
[0.5]
.50
[12.7]
5-.05
[Ø1.3]
.25
[6.35]
.30
[7.6]
.30
[7.6]
*
.03
[0.8]
Type 1
*
.157
[4]
.06
[1.5]
Type 1
Type 2
VIEWED TOWARD TERMINALS
.703 Max
[17.85]
.407 Max
[10.35]
.1
[2.54]
*Not used on Form A version
Wiring diagram
3
3
.494 Max
[12.55]
2
.157
[4]
3-.012
[0.3]
4
.03
[0.8]
Type 2
4
5
2
*
*
Type 1
.016
[0.4]
D .02
[0.5]
5
Type 2
VIEWED TOWARD TERMINALS
*Not used on Form A version
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
10/31/08W
Similar pages