PHILIPS BGY785AD Catv amplifier module Datasheet

DISCRETE SEMICONDUCTORS
DATA SHEET
BGY785AD
CATV amplifier module
Product specification
Supersedes data of 1995 Sep 14
File under Discrete Semiconductors, SC16
1997 Apr 14
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
FEATURES
PINNING - SOT115J
• Excellent linearity
PIN
DESCRIPTION
• Extremely low noise
1
input
• Silicon nitride passivation
2
common
• Rugged construction
3
common
• Gold metallization ensures excellent reliability.
5
+VB
7
common
APPLICATIONS
8
common
CATV systems operating in the 40 to 750 MHz frequency
range.
9
output
handbook, halfpage
DESCRIPTION
1
Hybrid high dynamic range cascode amplifier module with
darlington pre-stage dies in a SOT115J package operating
at a voltage supply of 24 V (DC).
2
3
8
5 7 9
Side view
MSA319
Fig.1 Simplified outline.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
power gain
Gp
Itot
total current consumption (DC)
CONDITIONS
MIN.
MAX.
UNIT
f = 50 MHz
18
19
dB
f = 750 MHz
18.5
−
dB
VB = 24 V
−
265
mA
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
MIN.
MAX.
UNIT
Vi
RF input voltage
−
60
dBmV
Tstg
storage temperature
−40
+100
°C
Tmb
operating mounting base temperature
−20
+100
°C
1997 Apr 14
2
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
CHARACTERISTICS
Table 1
Bandwidth 40 to 750 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω
SYMBOL
Gp
PARAMETER
power gain
CONDITIONS
MIN.
MAX.
UNIT
f = 50 MHz
18
19
dB
f = 750 MHz
18.5
−
dB
SL
slope cable equivalent
f = 40 to 750 MHz
0.2
2
dB
FL
flatness of frequency response
f = 40 to 750 MHz
−
±0.5
dB
S11
input return losses
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 640 MHz
15.5
−
dB
f = 640 to 750 MHz
14
−
dB
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 640 MHz
15.5
−
dB
f = 640 to 750 MHz
14
−
dB
S22
output return losses
S21
phase response
f = 50 MHz
135
225
deg
CTB
composite triple beat
110 channels flat; Vo = 44 dBmV;
measured at 745.25 MHz
−
−58
dB
Xmod
cross modulation
110 channels flat; Vo = 44 dBmV;
measured at 55.25 MHz
−
−56
dB
CSO
composite second order
distortion
110 channels flat; Vo = 44 dBmV;
measured at 746.5 MHz
−
−58
dB
d2
second order distortion
note 1
−
−68
dB
Vo
output voltage
dim = −60 dB; note 2
61
−
dBmV
F
noise figure
f = 50 MHz
−
5.5
dB
f = 450 MHz
−
5
dB
f = 550 MHz
−
5.5
dB
f = 600 MHz
−
5.5
dB
Itot
total current consumption (DC)
f = 750 MHz
−
6
dB
note 3
−
265
mA
Notes
1. fp = 55.25 MHz; Vp = 44 dBmV;
fq = 691.25 MHz; Vq = 44 dBmV;
measured at fp + fq = 746.5 MHz.
2. Measured according to DIN45004B:
fp = 740.25 MHz; Vp = Vo;
fq = 747.25 MHz; Vq = Vo −6 dB;
fr = 749.25 MHz = ; Vr = Vo −6 dB;
measured at fp + fq − fr = 738.25 MHz.
3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
1997 Apr 14
3
Philips Semiconductors
Product specification
CATV amplifier module
Table 2
BGY785AD
Bandwidth 40 to 600 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω
SYMBOL
Gp
PARAMETER
power gain
CONDITIONS
MIN.
MAX.
UNIT
f = 50 MHz
18
19
dB
f = 600 MHz
18.5
−
dB
f = 40 to 600 MHz
0.2
2
dB
SL
slope cable equivalent
FL
flatness of frequency response
f = 40 to 600 MHz
−
±0.3
dB
S11
input return losses
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 600 MHz
16
−
dB
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 600 MHz
16
−
dB
S22
output return losses
S21
phase response
f = 50 MHz
135
225
deg
CTB
composite triple beat
85 channels flat;
Vo = 44 dBmV;
measured at 595.25 MHz
−
−64
dB
Xmod
cross modulation
85 channels flat;
Vo = 44 dBmV;
measured at 55.25 MHz
−
−59
dB
CSO
composite second order distortion
85 channels flat;
Vo = 44 dBmV;
measured at 596.5 MHz
−
−60
dB
d2
second order distortion
note 1
−
−70
dB
Vo
output voltage
dim = −60 dB; note 2
64
−
dBmV
F
noise figure
see Table 1
−
−
dB
Itot
total current consumption (DC)
note 3
−
265
mA
Notes
1. fp = 55.25 MHz; Vp = 44 dBmV;
fq = 541.25 MHz; Vq = 44 dBmV;
measured at fp + fq = 596.5 MHz.
2. Measured according to DIN45004B:
fp = 590.25; Vp = Vo;
fq = 597.25; Vq = Vo −6 dB;
fr = 599.25; Vr = Vo −6 dB;
measured at fp + fq − fr = 588.25 MHz.
3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
1997 Apr 14
4
Philips Semiconductors
Product specification
CATV amplifier module
Table 3
BGY785AD
Bandwidth 40 to 550 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω
SYMBOL
Gp
PARAMETER
power gain
CONDITIONS
MIN.
MAX.
UNIT
f = 50 MHz
18
19
dB
f = 550 MHz
18.5
−
dB
f = 40 to 550 MHz
0.2
2
dB
SL
slope cable equivalent
FL
flatness of frequency response
f = 40 to 550 MHz
−
±0.3
dB
S11
input return losses
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 550 MHz
16
−
dB
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 550 MHz
16
−
dB
S22
output return losses
S21
phase response
f = 50 MHz
135
225
deg
CTB
composite triple beat
77 channels flat;
Vo = 44 dBmV;
measured at 547.25 MHz
−
−66
dB
Xmod
cross modulation
77 channels flat;
Vo = 44 dBmV;
measured at 55.25 MHz
−
−61
dB
CSO
composite second order distortion
77 channels flat;
Vo = 44 dBmV;
measured at 548.5 MHz
−
−62
dB
d2
second order distortion
note 1
−
−72
dB
Vo
output voltage
dim = −60 dB; note 2
64.5
−
dBmV
F
noise figure
see Table 1
−
−
dB
Itot
total current consumption (DC)
note 3
−
265
mA
Notes
1. fp = 55.25 MHz; Vp = 44 dBmV;
fq = 493.25 MHz; Vq = 44 dBmV;
measured at fp + fq = 548.5 MHz.
2. Measured according to DIN45004B:
fp = 540.25 MHz; Vp = Vo;
fq = 547.25 MHz; Vq = Vo −6 dB;
fr = 549.25 MHz; Vr = Vo −6 dB;
measured at fp + fq − fr = 538.25 MHz.
3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
1997 Apr 14
5
Philips Semiconductors
Product specification
CATV amplifier module
Table 4
BGY785AD
Bandwidth 40 to 450 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω
SYMBOL
Gp
PARAMETER
power gain
CONDITIONS
MIN.
MAX.
UNIT
f = 50 MHz
18
19
dB
f = 450 MHz
18.5
−
dB
f = 40 to 450 MHz
0.2
2
dB
SL
slope cable equivalent
FL
flatness of frequency response
f = 40 to 450 MHz
−
±0.3
dB
S11
input return losses
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 450 MHz
16
−
dB
f = 40 to 80 MHz
20
−
dB
f = 80 to 160 MHz
18.5
−
dB
f = 160 to 320 MHz
17
−
dB
f = 320 to 450 MHz
16
−
dB
S22
output return losses
S21
phase response
f = 50 MHz
135
225
deg
CTB
composite triple beat
60 channels flat;
Vo = 46 dBmV;
measured at 445.25 MHz
−
−66
dB
Xmod
cross modulation
60 channels flat;
Vo = 46 dBmV;
measured at 55.25 MHz
−
−59
dB
CSO
composite second order distortion
60 channels flat;
Vo = 46 dBmV;
measured at 446.5 MHz
−
−65
dB
d2
second order distortion
note 1
−
−75
dB
Vo
output voltage
dim = −60 dB; note 2
66
−
dBmV
F
noise figure
see Table 1
−
−
dB
Itot
total current consumption (DC)
note 3
−
265
mA
Notes
1. fp = 55.25 MHz; Vp = 46 dBmV;
fq = 391.25 MHz; Vq = 46 dBmV;
measured at fp + fq = 446.5 MHz.
2. Measured according to DIN45004B:
fp = 440.25 MHz; Vp = Vo;
fq = 447.25 MHz; Vq = Vo −6 dB;
fr = 449.25 MHz; Vr = Vo −6 dB;
measured at fp + fq − fr = 438.25 MHz.
3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
1997 Apr 14
6
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
PACKAGE OUTLINE
handbook, full pagewidth
27.2 max
13.8 max
10.2
3.8
max
8
4.15
3.85
9.2
max
20.8
max
8.8
min
12.7
1 2 3
0.25
7 8
(2)
UNC 6-32 (1)
2.4 max
2.54
0.51
0.38
2.54
9
4.2
∅ 0.25 M
(5.08)
25.4
4.15
3.85
44.8
max 38.1
Dimensions in mm.
(1) Screw 6-32 UNC-2A available on request.
(2) Leads gold plated.
Fig.2 SOT115J.
1997 Apr 14
5
7
MSA318 - 1
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
DEFINITIONS
Data Sheet Status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1997 Apr 14
8
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
NOTES
1997 Apr 14
9
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
NOTES
1997 Apr 14
10
Philips Semiconductors
Product specification
CATV amplifier module
BGY785AD
NOTES
1997 Apr 14
11
Philips Semiconductors – a worldwide company
Argentina: see South America
Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113,
Tel. +61 2 9805 4455, Fax. +61 2 9805 4466
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101, Fax. +43 1 60 101 1210
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 200 733, Fax. +375 172 200 773
Belgium: see The Netherlands
Brazil: see South America
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 689 211, Fax. +359 2 689 102
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Colombia: see South America
Czech Republic: see Austria
Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S,
Tel. +45 32 88 2636, Fax. +45 31 57 0044
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615800, Fax. +358 9 61580920
France: 4 Rue du Port-aux-Vins, BP317, 92156 SURESNES Cedex,
Tel. +33 1 40 99 6161, Fax. +33 1 40 99 6427
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 23 53 60, Fax. +49 40 23 536 300
Greece: No. 15, 25th March Street, GR 17778 TAVROS/ATHENS,
Tel. +30 1 4894 339/239, Fax. +30 1 4814 240
Hungary: see Austria
India: Philips INDIA Ltd, Shivsagar Estate, A Block, Dr. Annie Besant Rd.
Worli, MUMBAI 400 018, Tel. +91 22 4938 541, Fax. +91 22 4938 722
Indonesia: see Singapore
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3,
20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108,
Tel. +81 3 3740 5130, Fax. +81 3 3740 5077
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381
Middle East: see Italy
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA,
Tel. +48 22 612 2831, Fax. +48 22 612 2327
Portugal: see Spain
Romania: see Italy
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231,
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000,
Tel. +27 11 470 5911, Fax. +27 11 470 5494
South America: Rua do Rocio 220, 5th floor, Suite 51,
04552-903 São Paulo, SÃO PAULO - SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 829 1849
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 3 301 6312, Fax. +34 3 301 4107
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 632 2000, Fax. +46 8 632 2745
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2686, Fax. +41 1 481 7730
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2865, Fax. +886 2 2134 2874
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL,
Tel. +90 212 279 2770, Fax. +90 212 282 6707
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381
Uruguay: see South America
Vietnam: see Singapore
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 625 344, Fax.+381 11 635 777
For all other countries apply to: Philips Semiconductors, Marketing & Sales Communications,
Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
Internet: http://www.semiconductors.philips.com
© Philips Electronics N.V. 1997
SCA54
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
127167/00/03/pp12
Date of release: 1997 Apr 14
Document order number:
9397 750 02147
Similar pages