ON CPH3122-TL-E Voltage suppressor Datasheet

Ordering number : EN7220B
CPH3122
Bipolar Transistor
–30V, –3A, Low VCE(sat) PNP Single CPH3
http://onsemi.com
Applications
•
Relay drivers, lamp drivers, motor drivers, flash
Features
•
•
•
•
•
•
Adoption of MBIT processes
Large current capacity
Low collector to emitter saturation voltage
High-speed switching
Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm)
High allowable power dissipation
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Collector to Base Voltage
Conditions
Ratings
Unit
VCBO
VCEO
Collector to Emitter Voltage
Emitter to Base Voltage
Collector Current (Pulse)
VEBO
IC
ICP
Base Current
IB
Collector Dissipation
Junction Temperature
PC
Tj
Storage Temperature
Tstg
Collector Current
--30
V
--30
V
--5
V
--3
A
--5
--600
When mounted on ceramic substrate (600mm2×0.8mm)
A
mA
0.9
W
150
°C
--55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Package Dimensions
Product & Package Information
unit : mm (typ)
7015A-003
• Package
: CPH3
• JEITA, JEDEC
: SC-59, TO-236, SOT-23
• Minimum Packing Quantity : 3,000 pcs./reel
CPH3122-TL-E
0.6
2.9
0.15
Packing Type: TL
0.05
LOT No.
0.2
AT
3
1.6
2.8
Marking
0.9
0.2
0.6
TL
1
0.95
2
0.4
1 : Base
2 : Emitter
3 : Collector
CPH3
Electrical Connection
3
1
2
Semiconductor Components Industries, LLC, 2013
November, 2013
N2013 TKIM TC-00003060/N1504 TSIM TB-00000300/41002 TSIM TA-100028,100030 No.7220-1/4
CPH3122
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Collector Cutoff Current
ICBO
IEBO
hFE
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
VCE= --2V, IC= --500mA
VCE= --10V, IC= --500mA
VCE(sat)1
Collector to Emitter Saturation Voltage
VCE(sat)2
Base to Emitter Saturation Voltage
VBE(sat)
V(BR)CBO
Collector to Base Breakdown Voltage
Collector to Emitter Breakdown Voltage
Emitter to Base Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
min
typ
Unit
max
VCB= --30V, IE=0A
VEB= --4V, IC=0A
fT
Cob
Output Capacitance
Ratings
Conditions
200
--0.1
μA
--0.1
μA
560
400
VCB= --10V, f=1MHz
IC= --1.5A, IB= --30mA
MHz
25
IC= --1.5A, IB= --75mA
IC= --1.5A, IB= --30mA
IC= --10μA, IE=0A
pF
--180
--270
mV
--120
--180
mV
--0.83
--1.2
--30
V(BR)CEO
V(BR)EBO
ton
IC= --1mA, RBE=∞
IE= --10μA, IC=0A
tstg
tf
See specified Test Circuit.
V
V
--30
V
--5
V
50
ns
270
ns
27
ns
Switching Time Test Circuit
IB1
PW=20μs
D.C.≤1%
OUTPUT
IB2
INPUT
RB
VR
RL
=24Ω
50Ω
+
470μF
+
100μF
VBE=5V
VCC= --12V
IC=20IB1= --20IB2= --500mA
Ordering Information
Device
CPH3122-TL-E
Shipping
memo
CPH3
3,000pcs./reel
Pb Free
VCE= --2V
--10mA
--8mA
--1.4
--1.2
--2.5
--6mA
--4mA
--1.0
--0.8
--2mA
--0.6
--0.4
--2.0
--1.5
--1.0
Ta=7
5°C
25°C
--25°C
mA
0
--2
--50m
--1.6
IC -- VBE
--3.0
Collector Current, IC -- A
A --40mA
--1.8
--3
0m
A
IC -- VCE
--2.0
Collector Current, IC -- A
Package
--0.5
--0.2
IB=0
0
0
--0.1
--0.2
--0.3
--0.4
--0.5
--0.6
--0.7
--0.8
Collector to Emitter Voltage, VCE -- V
--0.9
--1.0
IT04603
0
0
--0.2
--0.4
--0.6
--0.8
--1.0
Base to Emitter Voltage, VBE -- V
--1.2
IT04605
No.7220-2/4
CPH3122
hFE -- IC
1000
DC Current Gain, hFE
Gain-Bandwidth Product, f T -- MHz
7
5
Ta=75°C
25°C
--25°C
3
2
100
7
5
3
--0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector to Emitter
Saturation Voltage, VCE(sat) -- mV
Output Capacitance, Cob -- pF
5
3
2
3
5
7
2
--10
3
Collector to Base Voltage, VCB -- V
Collector to Emitter
Saturation Voltage, VCE(sat) -- mV
2
3
5 7 --0.1
7
5
3
2
C
75°
Ta=
°C 5°C
2
--25
2
3
5 7 --1.0
2
3
5 7 --10
IT04609
VCE(sat) -- IC
IC / IB=20
3
2
--100
7
°C
75
5
=
Ta
3
°C 25°
C
5
--2
2
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
5
7
IT04613
VBE(sat) -- IC
3
--1000
3
2
Collector Current, IC -- A
VCE(sat) -- IC
7
5
7
IT04611
IC / IB=50
--100
100
--10
--0.01
5
Base to Emitter
Saturation Voltage, VBE(sat) -- V
3
2
5
7
2
3
7
f=1MHz
10
--1.0
5
Collector Current, IC -- A
Cob -- VCB
100
VCE= --10V
7
5
--0.01
5 7 --10
IT04607
Collector Current, IC -- A
f T -- IC
1000
VCE= --2V
IC / IB=50
2
--1.0
Ta= --25°C
7
75°C
25°C
5
2
--10
--0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
Collector Current, IC -- A
DC
Collector Dissipation, PC -- W
1m
s
s
op
era
tio
3
2
n
--0.1
7
5
Ta=25°C
Single pulse
When mounted on ceramic substrate (600mm2✕0.8mm)
3
2
3
5
7 --1.0
2
3
5
7
IT04617
PC -- Ta
0.9
0m
2
7 --0.1
<50μs
ms
10
--0.01
--0.1
5
1.0
10
--1.0
7
5
3
2
3
Collector Current, IC -- A
SOA
ICP= --5A
IC= --3A
2
IT04615
μs
100
s
0μ
3
2
3
--0.01
7
50
Collector Current, ID -- A
--10
7
5
5
5
7 --1.0
2
3
5
7 --10
2
Collector to Emitter Voltage, VCE -- V
W
he
n
0.8
m
ou
nt
0.7
ed
0.6
on
ce
ra
m
0.5
ic
su
bs
tra
0.4
te
(6
00
0.3
m
0.2
m2
✕
0.
8m
m
0.1
)
0
3
5
IT04619
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT04620
No.7220-3/4
CPH3122
Outline Drawing
CPH3122-TL-E
Land Pattern Example
Mass (g) Unit
0.013 mm
* For reference
Unit: mm
2.4
1.4
0.6
0.95
0.95
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.7220-4/4
Similar pages