SAMWHA CR2633Z5U104Z250B Radial & axial Datasheet

Radial & Axial
Multi Layer Ceramic Capacitors
Radial & Axial
Characteristic
No.
Item
Temperature
Compensating Type
14 Capacitance Capacitance
Temperature Change
Characteristics
Temperature
Coefficient
Char.
Temp.
Range
Test Methods
and Conditions
High Dielectric Constant Type
Char.
Temp.
Range
X7R
-55 to
+125℃
X5R
-55 to
+85℃
Y5V
-30 to
+85℃
Reference
Temp.
Cap.
Change
Within
±15%
25℃
Temperature
Coefficient
-55 to
C0G
±30ppm/℃
+125℃
Within
±15%
Within
22%
-82%
(1) Temperature Compensating Type:
The temperature coefficient is
determined using the capacitance
measured in step 3 as a reference,
When cycling the temperature
sequentially from step 1 through 5,
(C0G: +25 to 125℃) the capacitance
shall be with in the specified
tolerance for the temperature
coefficient.
The capacitance drift is calculated
by dividing the difference
between the maximum measured
values in the step 1, 3 and 5 by the
Cap. value in step 3
Step
Temperature(℃)
1
25±2
2
-55±3
3
25±2
4
125±3(for C0G)
5
25±2
Features
This widely used ceramic capacitors includes both monolithic and multilayer types to provide a wide
capacitance range of 1pF through 1㎌ in respectly one standard size and shape(Radial & Axial).
Applications
The class1 temperature compensating(C0G) products can be used in circuits to stabilize frequency and
temperature characteristics.
The X7R, Z5U, Y5V dielectrics are optimum for by pass capacitors.
Shape and Dimensions
Bulk Type
Radial Type
(2) High Dielectric Constant Type :
The ranges of capacitance
change compared with the 25℃
value over the temperature
range shown in the table shall
be in the specified range.
CODE
051B
077B
15
16
Preservation(keeping) ※When solderability is considered, capacitors are
recommended to be used in 12 months
The regulation of
environmental
pollution materials.
L
Max.
W
Max.
5.5
5.5
7.7
7.6
T
Max.
H
Max.
P
±0.7
Ød
Color
Marking
5
0.5
Orange
or Gold
Ex) 104
6.4
3.2
9.2
(1) Temperature : 25℃ ±10℃
(2) Relative Humidity : Below 70% RH
※Never use materials mentioned below in MLCC products regulated this document.
Pb, Cd, Hg, Cr+6, PBB(polybromide biphenyl), PBDE(polybrominated diphenyl ethers), asbestos.
- In case of high Voltage and thin layer type Capacitor, it can be different from nomal specification.
So Please ask to our sales person.
Flat Type
Radial Type
Axial Type
www.samwha.com
24
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
25
Radial & Axial
Multi Layer Ceramic Capacitors
Code
Dimensions
Tolerance
Code
Dimensions
Tolerance
Code
Dimensions
Tolerance
D(Ø)
4
±0.3
P1
3.85
±0.7
F
64.8
-0, +2
H
16
±0.5
P2
6.35
±1.3
G
H1
9
+0.76, -0.5
T
0.9
Max.
H
=J
±1.2
H2
0
±2
W1
18
±0.5
J
=H
±1.2
L
11
Max.
W2
0
+0.6 Max.
K
0.8
Max.
L1
1.5
Max.
S
5
±0.7
N
5
±0.4
P
12.7
±0.3
R
3.2
Min.
No adhesive may be exposed
Capacitance Tolerance Code
50.8~53.3
Code
Tolerance
Remark
J
± 5.0 %
C0G
K
±10 %
X7R, C0G
M
± 20 %
Z5U, X7R
Z
+80, -20%
Z5U, Y5V
Rated Voltage Code
Code
250
500
101
Volt
DC 25V
DC 50V
DC 100V
Code
B
R
F
Packing
Bulk
Reel Pack
Flat Pack
How to Order(Product Identification)
Packing Code
CA 2633 Y5V 104 Z 500 F
Reliability and Test Conditions
Dimension Code
Type
Characteristic
CR : Radial Lead Type
The number shows the maximum length of "L" by 1/10 in millimeter, and the
CA : Axial Lead Type
alphabet means lead difference.(Refer to above diagram)
Temperature Coefficient Code
Temperature Characteristice
Temperature Range
Capacitance Change or
Temperature Coefficient
C0G
-55 to 125℃
0±30ppm/℃
X7R
-55 to 125℃
±15%
Z5U
10℃ to 85℃
+22, -56%
Y5V
-30 to 85℃
+22, -82%
Item
Temperature
Compensating Type
1.
Operating Temperature
Range
C0G : -55 to +125℃
2.
Insulation Resistance
More than 10,000MΩ or 500Ω.F(whichever is smaller)
Applied the rated voltage for
2 minute
3.
Dielectric Strength
No detects or abnormalities
- C0G : The rated voltage×300%
- X7R, Z5U, Y5V : 〃
×250%
4.
Capacitance
Within the specified tolerance
Temperature Compensating Type
5.
Dissipation Factor
30㎊ Min. :
Q≥1,000(DF≤0.1%)
Char. 50V Min.
25V
X7R
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z%V ≤4.0%
-
≤5%
(<220㎋)
Y5V ≤7%
(≥220㎋)
≤
7%
Capacitance Code(Pico Farads)
First two digits are significant ; third digit denotes number of zeros.
High Dielectric Constant Type
X7R : -55 to +125℃ Z5U : +10 to +85℃
Y5V : -30 to 85℃
≤2.5%
16V
10V
6.
www.samwha.com
SAMWHA CAPACITOR Co., Ltd.
Terminal Strength
Testing
Frequency
Testing
Voltage
C0G
(C≤1000pF)
1±0.1M㎐
0.5 to
5V rms
C0G
(C >1000pF)
1±0.1k㎐
1±0.2V rms
X7R, Z5U, Y5V
(C≤10㎌
10V Min.)
1±0.1k㎐
1±0.2V rms
Cap.
≤3.5% ≤5.0%
-
-
≤9%
(<220㎋)
≤12.5%
≤12.5%
(≥220㎋)
Ex.) 101 = 100㎊, 1R5 = 1.5㎊, 103 = 10,000㎊
26
Test Methods
and Conditions
No.
No evidence of damage to body of device of looseness
of terminals.
A static load of 10N(1kgf) :
applied to one terminal in the
axial direction and acting in a
direction away from the body for
1 to 5 secs.
Multi Layer Ceramic Capacitors
27
Radial & Axial
Multi Layer Ceramic Capacitors
Characteristic
Item
No.
7.
Resistance Appearance
to
Capacitance
Soldering
Change
Heat
Dissipation
Factor(or Q)
I.R.
8.
Temperature Appearance
Cycle
Capacitance
Change
Dissipation
Factor(or Q)
9.
Humidity
Load
Within ±2.5% or ±0.25pF X7R
: ≤± 7.5%
(whichever is larger) Z5U, Y5V : ≤± 20%
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
Char. 50V Min.
25V
X7R ≤ 2.5%
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z5U
≤4.0%
16V
10V
≤3.5% ≤5.0%
-
-
- Immersion Time : 5±0.5sec
- Take it out and set it for 24±2
hours(temperature compensating
type)or 48±4hours(high dielectric
constant type) then measure.
No.
Item
10
Dissipation
High
Temperature Factor(or Q)
Load
No marking defects
Char. 50V Min.
25V
Step
X7R ≤ 2.5%
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z5U
≤4.0%
-
16V
10V
≤3.5% ≤5.0%
-
-
≤9%
≤5%
(<220㎋)
(<220㎋)
Y5V ≤7%
≤7% ≤12.5% ≤12.5%
(≥220㎋)
(≥220㎋)
No marking defects
Capacitance
Change
Within ±7.5% or±0.75㎊
(whichever is larger)
10㎊≤Cp≤30㎊:
Q≥275+5/2C
(DF≤1/(275+5/2C))
1
2
3
4
Capacitance Capacitance
Temperature Change
Characteristics
Min.
Max.
Temp. Operating Room Operating Room
(℃)
Temp. Temp. Temp. Temp.
+0, -3
+3, -0
Time
(min)
30±3
2 to 3
30±3
2 to 3
Char. 50V Min.
25V
16V
10V
X7R
≤5%
≤5%
≤5%
≤5%
Z5U
≤4.0%
-
-
-
Y5V
≤7.5%
≤10%
(<1㎌)
≤12.5% ≤15%
≤7%
(≥1㎌)
Char.
Temp.
Range
X7R
-55 to
+125℃
Z5U
-10 to
+85℃
Y5V
Reference
Temp.
-30 to
+85℃
Cap.
Change
Within
±15%
25℃
Within
+22%
-56%
Within
+22%
-82%
Take it out and set it for 24±2 hours
[tempeature compensating or 48±4
hours(high dielectric Type) at room
temperature, than measure.
Take it out and set it for 24±2 hours
(temperature compensatig) or 48±4
hours(high dielectric constant type)
at room temperature, then measure.
The charge/discharge current is less
than 50mA.
(1) Temperature Compensating Type :
The temperature coefficient is
determined using the capacitance
measured in step 3 as a reference.
When cycling the temperature
sequentially from step 1 through 5.
(SL: +25 to 85℃) the capacitance shall
be with in the specified tolerance for
the temperature coefficient.
The capacitance drift is calculated
dividing the difference between the
maximum measured values in the
step 1, 3 and 5 by Cap, value in step 3.
Step
Temperature
Coefficient
Char.
C0G
- Temperature : 40±2℃
Temp.
Range
Temperature
Coefficient
-55 to
±30ppm/℃
+125℃
- Humidity : 90~95%RH
X7R : Within ±12.5%
Z5U : Within ±30%
Y5V : Within + 30%, -40%
(Y5V/1.0μF, 2.2μF, 4.7μF/10V)
Within ±30% (others)
Test Methods
and Conditions
High Dielectric Constant Type
More than 1000MΩ or 50ΩF(Whichever is smaller)
I.R.
11
Within±2.5% or ±0.25pF X7R
: Within + 7.5%
Z5U, Y5V : Within ± 20%
30㎊ Min. :
Q≥350 (DF≤0.3%)
10㎊ Max. :
Q≥200+10C
(DF≤1/(200+10C))
More than 10,000MΩ or 500Ω.F (whichever & smaller)
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
Temperature
Compensating Type
-
≤9%
≤5%
(<220㎋)
(<220㎋)
Y5V ≤7%
≤7% ≤12.5% ≤12.5%
(≥220㎋)
(≥220㎋)
Appearance
www.samwha.com
10. High
Appearance
Temperature
Capacitance
Load
change
Characteristic
- Soldering Temp : 260±5℃
No marked defect
More than 10,000MΩ or 500Ω.F (Whichever is smaller)
I.R.
Test Methods
and Conditions
High Dielectric Constant Type
I.R.
Dissipation
Factor(or Q)
28
Temperature
Compensating Type
Temperature(℃)
1
25±2
2
-55±3
3
25±2
4
125±3(for C0G)
5
25±2
- Hour : 500±12hrs
30㎊ Min. :
Q≥200 (DF≤0.5%)
Char. 50V Min.
25V
16V
10V
X7R
≤5%
≤5%
≤5%
≤5%
30㎊ Max. :
Q≥100+10/3C
(DF≤1/(100+10/3C))
Z5U
≤4.0%
-
-
-
Y5V
≤10%
(<1 ㎌)
≤7.5% ≤12.5% ≤12.5% ≤15%
(≥1 ㎌)
- Test Voltage : Tge rated voltage
- Take it out and set it for 24±2 hours
(temperature compensatig) or 48±4
hours(high dielectric constant type)
at room temperature, then measure.
The charge/discharge current is less
than 50mA.
(2) High Dielectric Constant Type :
The ranges of capacitance
change compared with the 25℃
value over the temperature
range shown in the table shall
be in the specified range.
12 The regulation of
environmental
pollution materials
※Never use materials mentioned below in leaded MLCC products regulated this document.
Pb, Cd, Hg, Cr+6, PBB(polybromida biphenyl), PBDE(polybrominated diphenyl ethers), asbestos.
13 The regulation about
destructive materials
of the ozone layer
Never use the ODS(ozone depleting substance) materials below in leaded MLCC products
regulated this document.
More than 500MΩ or 25Ω.F(whichever is smaller)
No marked defect
Within ±3% or±0.3㎊
(whichever is larger)
SAMWHA CAPACITOR Co., Ltd.
- Testing Time : 1000±12hrs
X7R : Within ±12.5% , Z5U : Within ±30%
Y5V : Within ±30%(Cap. < 1.0μF)
Within +30% , -40%(Cap. ≥ 1.0μF)
- Applied Voltage : Rated Voltage×200%
- Temperature :
C0G, X7R → 125±3℃
Z5U, Y5V → 85±3℃
Packing Quantity
Unit : pcs
Radial Type
Axial Type
Inner Box
Outer Box
Remark
Inner Box
Outer Box
Remark
2,500
15,000
Packing set on the basis of flat tapping
5,000
50,000
Packing set on the basis of flat tapping
Multi Layer Ceramic Capacitors
29
Multi Layer Ceramic Capacitors
Capacitance Range
Type
Char.
Cap(pF) Volt
C0G
50
100
Radial
X7R
50
100
Z5U
50
Y5V
16
50
C0G
50
Axial
X7R
Z5U
50
50
Y5V
50
1
2
3
4
5
6
7
8
9
10
12
15
Chip Beads & Inductors
16
18
20
22
24
27
Chip Ferrite Beads
32
Chip Ferrite Beads Arrays
51
Chip Ferrite Inductors
54
Chip Power Inductors
58
30
33
36
39
43
47
51
56
62
68
75
82
91
100
120
150
180
220
270
330
390
470
560
680
820
1.000
1.200
1.500
1.800
2.200
2.700
3.300
3.900
4.700
5.600
6.800
8.200
10.000
15.000
22.000
33.000
47.000
68.000
100.000
www.samwha.com
150.000
220.000
330.000
470.000
680.000
1.000.000
30
SAMWHA CAPACITOR Co., Ltd.
Similar pages