Omron E3T-FD11 The improved e3t series with easier, smoother mounting and installation Datasheet

New Product News
Ultracompact, Ultrathin Photoelectric Sensor with Built-in Amplifier
E3T
The Improved E3T Series with Easier,
Smoother Mounting and Installation
• Newly added Through-beam, Long-distance (2 m) Sensors
(E3T-ST3@).
• Easy installation with M3-mounting Sensors
(E3T-ST@@M, E3T-FD@@M, and E3T-SL@@M).
• Small Cylindrical Sensors for one-point mounting also added to the Series.
(E3T-C@@@(S)).
Be sure to read Safety Precautions on page 13.
Lineup Overview
Appearance
Sensing
method
Through-beam
Retroreflective
Diffusereflective
Convergentreflective
BGSreflective
M2-mounting
●
●
---
●
---
M3-mounting
●
---
---
●
---
M2-mounting
●
---
●
---
●
M3-mounting
---
---
●
---
---
---
●
---
●
---
---
---
●
---
---
---
---
Side-view
Rectangular
type
Flat
Top-view
Cylindrical
type
Side-view
1
E3T
Ordering Information
Sensors [Refer to Dimensions on page 14.]
M2-mounting Sensors
Sensing method
Red light
Appearance
Sensing distance
2m
(Sensitivity Adjustment
Unit can be used.)
1m
Through-beam
(
Emitter
+
Receiver
Infrared light
A set of mounting screws is included with the Sensor.
(Sensitivity Adjustment
Unit can be used.)
*2
)
300 mm
500 mm
300 mm
Using the E39-R4 Reflector
provided 200 mm [30 mm] *1
Model
Operation mode
NPN output
PNP output
Light-ON
E3T-ST31 2M
E3T-ST33 2M
Dark-ON
E3T-ST32 2M
E3T-ST34 2M
Light-ON
E3T-ST11 2M
E3T-ST13 2M
Dark-ON
E3T-ST12 2M
E3T-ST14 2M
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
E3T-ST21 2M
E3T-ST22 2M
E3T-FT11 2M
E3T-FT12 2M
E3T-FT21 2M
E3T-FT22 2M
E3T-ST23 2M
E3T-ST24 2M
E3T-FT13 2M
E3T-FT14 2M
E3T-FT23 2M
E3T-FT24 2M
Light-ON
E3T-SR41 2M*3
E3T-SR43 2M*3
Dark-ON
E3T-SR42 2M*3
E3T-SR44 2M*3
Light-ON
E3T-FD11 2M
E3T-FD13 2M
Retroreflective
Using the E39-R37-CA
100 mm [10 mm] *1
Diffusereflective
5 to 30 mm
5 to 15 mm
Convergentreflective
5 to 30 mm
1 to 15 mm
BGSreflective
1 to 30 mm
M3-mounting Sensors
Sensing method
Appearance
(
Sensing distance
1m
*2
)
300 mm
Diffusereflective
5 to 15 mm
5 to 30 mm
Small Cylindrical Sensors
Sensing method
Model
Operation mode
NPN output
PNP output
Light-ON
E3T-ST11M 2M
E3T-ST13M 2M
Dark-ON
E3T-ST12M 2M
E3T-ST14M 2M
Light-ON
E3T-ST21M 2M
E3T-ST23M 2M
Dark-ON
E3T-ST22M 2M
E3T-ST24M 2M
Light-ON
E3T-FD11M 2M
E3T-FD13M 2M
Dark-ON
E3T-FD12M 2M
E3T-FD14M 2M
Light-ON
Dark-ON
Light-ON
Dark-ON
E3T-SL11M 2M
E3T-SL12M 2M
E3T-SL21M 2M
E3T-SL22M 2M
E3T-SL13M 2M
E3T-SL14M 2M
E3T-SL23M 2M
E3T-SL24M 2M
Appearance
A set of mounting nuts is included with the Sensor.
Sensing distance
)
Diffusereflective
(with adjuster)
Model
Operation mode
NPN output
PNP output
Light-ON
---
---
Dark-ON
E3T-CT12 2M
E3T-CT14 2M
Light-ON
---
---
Dark-ON
E3T-CT22S 2M
E3T-CT24S 2M
Light-ON
E3T-CD11 2M
E3T-CD13 2M
Dark-ON
---
---
1m
Through-beam
(
E3T-FD14 2M
E3T-SL13 2M
E3T-SL14 2M
E3T-SL23 2M
E3T-SL24 2M
E3T-FL13 2M
E3T-FL14 2M
E3T-FL23 2M
E3T-FL24 2M
5 to 30 mm
Convergentreflective
Emitter
+
Receiver
E3T-FD12 2M
E3T-SL11 2M
E3T-SL12 2M
E3T-SL21 2M
E3T-SL22 2M
E3T-FL11 2M
E3T-FL12 2M
E3T-FL21 2M
E3T-FL22 2M
A set of mounting screws is not included with the Sensor. Order a Screw Set separately if required.
Through-beam
Emitter
+
Receiver
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
500 mm
3 to 50 mm
*1. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. The model number of the Emitter is expressed by adding an ”L” to the set model number in the table. Example: E3T-ST11-L 2M
The model number of the Receiver is expressed by adding a “D” to the set model number in the table. Example: E3T-ST11-D 2M
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models.)
*3. Models are available either with or without the E39-R37-CA Reflector included.
Models with E39-R37-CA Reflector. E3T-SR4@-S
Models without Reflector. E3T-SR4@-C
2
E3T
Variety of Connection Specifications
The models with the connection specifications marked with a black circle in the table are available. These are applicable only to M2-mounting
Sensors. The model number indication is a combination of the basic model and the connection specification.
Example:
E3T-ST11-M1TJ 0.3M
Basic model number Connection specification
NPN Output
Model
Sensing
method
Sensing
distance
Operation
mode
Model number example
E3T-ST11-M1TJ 0.3M
E3T-ST11 5M
E3T-ST11R 2M
E3T-ST11-ECON 0.3M
E3T-ST11-ECON 2M
Connection
specification
M12 pre-wired Smartclick Connector (cable length: 0.3 m)
Pre-wired
(cable length: 5 m)
Pre-wired robot
(cable length: 2 m)
e-CON pre-wired connector
(cable length: 0.3 m)
e-CON pre-wired connector
(cable length: 2 m)
Basic model
number
-M1TJ 0.3M
5M
R 2M
-ECON 0.3M
-ECON 2M
Light-ON
E3T-ST31
●
●
●
●
●
Dark-ON
E3T-ST32
●
●
●
●
●
Light-ON
E3T-ST11
●
●
●
●
●
Dark-ON
E3T-ST12
●
●
●
●
●
Light-ON
E3T-ST21
●
●
---
●
●
Dark-ON
E3T-ST22
●
●
---
●
●
Light-ON
E3T-FT11
●
●
●
●
●
Dark-ON
E3T-FT12
●
●
●
●
●
Light-ON
E3T-FT21
●
---
---
●
●
Dark-ON
E3T-FT22
●
---
---
●
●
Light-ON
E3T-SR41
●
●
●
●
●
Dark-ON
E3T-SR42
●
●
●
●
●
Light-ON
E3T-FD11
●
●
●
●
●
Dark-ON
E3T-FD12
●
●
●
●
●
Light-ON
E3T-SL11
●
●
●
●
●
Dark-ON
E3T-SL12
●
●
●
●
●
Light-ON
E3T-SL21
●
●
●
●
●
Dark-ON
E3T-SL22
●
●
●
●
●
Light-ON
E3T-FL11
●
---
●
---
---
Dark-ON
E3T-FL12
●
---
●
---
---
Light-ON
E3T-FL21
●
---
●
●
---
Dark-ON
E3T-FL22
●
---
●
---
---
2m
Throughbeam
(side-view)
1m
300 mm
Throughbeam
(flat)
Retroreflective
Diffusereflective
500 mm
300 mm
200 mm
(100 mm)*
5 to 30 mm
5 to 15 mm
Convergentreflective
5 to 30 mm
1 to 15 mm
BGSreflective
1 to 30 mm
*The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
PNP Output
Model
Sensing
method
Sensing
distance
Operation
mode
Model number example
E3T-ST13-M1TJ 0.3M
E3T-ST13 5M
E3T-ST13R 2M
Connection
specification
M12 pre-wired Smartclick
Connector (cable length:
0.3 m)
Pre-wired
(cable length: 5 m)
Pre-wired robot
(cable length: 2 m)
Basic model
number
-M1TJ 0.3M
5M
R 2M
Light-ON
E3T-ST33
●
●
●
Dark-ON
E3T-ST34
●
●
●
Light-ON
E3T-ST13
●
●
●
Dark-ON
E3T-ST14
●
●
●
Light-ON
E3T-ST23
●
---
---
Dark-ON
E3T-ST24
●
---
---
Light-ON
E3T-FT13
●
●
●
Dark-ON
E3T-FT14
●
●
●
Light-ON
E3T-FT23
●
---
---
Dark-ON
E3T-FT24
●
●
---
Light-ON
E3T-SR43
●
●
●
Dark-ON
E3T-SR44
●
●
●
Light-ON
E3T-FD13
●
●
●
Dark-ON
E3T-FD14
●
●
●
Light-ON
E3T-SL13
●
●
●
Dark-ON
E3T-SL14
●
●
●
Light-ON
E3T-SL23
●
●
●
Dark-ON
E3T-SL24
●
●
●
Light-ON
E3T-FL13
●
---
●
Dark-ON
E3T-FL14
●
---
●
Light-ON
E3T-FL23
●
---
●
Dark-ON
E3T-FL24
●
---
●
2m
Throughbeam
(side-view)
1m
300 mm
Throughbeam
(flat)
Retroreflective
Diffusereflective
500 mm
300 mm
200 mm
(100 mm)*
5 to 30 mm
5 to 15 mm
Convergentreflective
5 to 30 mm
1 to 15 mm
BGSreflective
1 to 30 mm
*The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
3
E3T
Accessories (Order Separately)
Accessories for M2-mounting Sensors These accessories are not included with the Sensor. Order them separately if required.
Applicable
Sensor
Name
Mutual Interference Prevention Filter for
Through-beam Side-view Sensors *1
0.5 dia.
Model
E3T-ST3@
E39-E14
E3T-ST1@
Quantity
Dimensions
page
Sensing distance 1 m
4
(Two each for Emitter
and Receiver)
Sensing distance 0.5 m
E3T-ST3@
Sensing distance 200 mm,
Minimum detectable object (typical)
0.5-mm dia.
E3T-ST1@
Sensing distance 100 mm,
Minimum detectable object (typical)
0.5-mm dia.
E3T-ST2@
Sensing distance 30 mm,
Minimum detectable object (typical)
0.5-mm dia.
Slit for Through-beam
Side-view Sensors
E39-S63
Sensing distance 600 mm,
Minimum detectable object (typical)
1-mm dia.
E3T-ST3@
1 dia.
2
(One each for Emitter
and Receiver; common
with Slit widths of 1 dia.
and 0.5 dia.)
E3T-ST1@
E3T-ST2@
Sensing distance 300 mm,
Minimum detectable object (typical)
1-mm dia.
19
Sensing distance 50 mm,
Minimum detectable object (typical)
0.5-mm dia.
E3T-FT2@
Sensing distance 30 mm,
Minimum detectable object (typical)
0.5-mm dia.
Slit for Through-beam Flat
Sensors
E39-S64
E3T-FT1@
Sensing distance 100 mm,
Minimum detectable object (typical)
1-mm dia.
E3T-FT2@
Sensing distance 50 mm,
Minimum detectable object (typical)
1-mm dia.
1 dia.
E39-E10
1
E3T-F@@@
E3T-S@@@
20
E39-L117
E39-L118
Screw Set for Side-view Sensors
Sensing distance (typical) 300 to
800 mm
E3T-ST1@
E39-L116
*3*4
Sensing distance (typical) 1,200 to
1,800 mm
E3T-ST3@
Mounting Brackets for Side-view Sensors E3T-S@@@
*2
Mounting Brackets for Flat Sensors *2
Screw Set for Flat Sensors
E3T-F@@@
21
E39-L119
E39-L120
*3
SUS Screw Set for Side-view Sensors *3
--Material: Iron (Same type as provided
with the Sensor.)
Contents: Phillips screws (M2×14),
Hexagonal nuts, Spring washers, Flat
washers
E39-L164
E39-L165
---
SUS Screw Set for Flat Sensors
Nut plate provided
1
2 for each
*3*4
Sensing distance 100 mm,
Minimum detectable object (typical)
1-mm dia.
E3T-FT1@
0.5 dia.
Sensitivity Adjustment Unit for Throughbeam Side-view Sensors
Remarks
Material: Iron (Same type as provided
with the Sensor.)
Contents: Phillips screws (M2×8),
Hexagonal nuts, Spring washers, Flat
washers
E3T-F@@@
E39-L172
2
Material: SUS304
Contents: Bolt with hexagonal hole
(M2×6)
E3T-S@@@
E39-L173
2 for each
Material: SUS304
Contents: Bolt with hexagonal hole
(M2×12), Hexagonal nuts, Spring
washers, Flat washers
*1.An arrow indicates the polarization direction. Mutual interference can be prevented by using different polarization directions for adjacent Emitters/Receivers.
*2. When using Through-beam Sensors (E3T-ST@@, E3T-FT@@), order one bracket for the Emitter and one for the Receiver.
*3. Order two Sets, one for the Emitter and one for the Receiver, for Through-beam Sensors (E3T-ST@@ or E3T-FT@@).
This is the Screw Set for mounting the Sensor to the Mounting Bracket. Order this Set if you loose the screws. Do not use this Screw Set to mount the Mounting
Bracket to the equipment.
*4. This is included with the Sensor.
4
E3T
Accessories for M3-mounting Sensors These accessories are not included with the Sensor. Order them separately if required.
Applicable
Sensor
Name
0.5
dia.
Slits for Through-beam
Side-view Sensors
Model
Quantity
Dimensions
page
E3T-ST1@M
E39-S76A
2
(One each for
Emitter and
Receiver)
E3T-ST2@M
E3T-ST1@M
1 dia.
19
E39-S76B
E3T-ST2@M
Mounting Bracket for Side-view
Sensors *1
E3T-S@@@M
E39-L166
Mounting Bracket for Flat Sensors
Back-mounting Spacer for Flat Sensors
E39-L167
Remarks
Sensing distance 100 mm,
Minimum detectable object (typical) 0.5-mm dia.
Sensing distance 30 mm,
Minimum detectable object (typical) 0.5-mm dia.
Sensing distance 300 mm,
Minimum detectable object (typical) 1-mm dia.
Sensing distance 100 mm,
Minimum detectable object (typical) 1-mm dia.
Nut plate provided
1
22
E3T-FD@@M
--Use this Spacer when mounting a Flat Sensor
(E3T-FD@@M) from the back.
E39-L168
Material: SUS304
Contents: Bolt with hexagonal hole (M3×6)
SUS Screw Set for Flat Sensors *2 E3T-FD@@M
E39-L170
2
SUS Screw Set for Side-view Sen- E3T-S@@@M
sors *1*2
E39-L171
2 for each
--Material: SUS304
Contents: Bolt with hexagonal hole (M3×15), Hexagonal nuts, Spring washers, Flat washers
*1.When using Through-beam Sensors (E3T-ST@@M), order one bracket for the Emitter and one for the Receiver.
*2. This is the Screw Set for mounting the Sensor to the Mounting Bracket. Order this Set if you loose the screws. Do not use this Screw Set to mount the Mounting
Bracket to the equipment.
Accessories for Small Cylindrical Sensors
Applicable
Sensor
Name
SUS Nut Set for Through-beam
Sensors *1
SUS Nut Set for Diffuse-reflective
Sensors
E3T-CT@@
E3T-CT@@S
Model
E39-M5
4 (Hexagonal
nuts),
2 (Toothed
washers)
E39-M6
2 (Hexagonal
nuts),
1(Toothed
washers)
E39-G17
1
E3T-CD@@
Adjustment Driver for Diffuse-reflective Sensors
Quantity
Dimensions
Page
---
Remarks
Material: SUS303
(Same type as provided with the Sensor.)
This Driver is used to turn the sensitivity adjuster.
Provided with E3T-CD@@
*1.This Nut Set is for the Emitter/Receiver. This is the Nut Set for mounting the Sensor. Order this Set if you loose the screws.
Accessories for All Sensors
Applicable
Sensor
Name
Model
E3T-SR4@
E39-R4
E3T-SR4@-S
E39-R37-CA *2
Quantity
Dimensions
Page
Small Reflectors
(for Retro-reflective Sensors)
18
Sensing distance 200 mm [30 mm] *1
Minimum detectable object 2-mm dia.
Provided with the E3T-SR4@
Sensing distance 100 mm [10 mm] *1
Minimum detectable object 2-mm dia.
Provided with the E3T-SR4@-S
19
Sensing distance 100 mm [10 mm] *1
Minimum detectable object 2-mm dia.
Use Tape Reflectors in combination
with the E3T-SR4@-C, which
does not come with a Reflector.
1
E39-RS1-CA *2
Tape Reflectors
(for Retro-reflective Sensors)
E39-RS2-CA *2
E3T-SR4@-C
Remarks
E39-RS3-CA *2
*1.Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. The E3T-SR4@ cannot be used with the E39-R37 or E39-RS1/2/3 (without CA) Tape Reflectors.
The E39-@-CA Reflector is for use only with the E3T-SR4@. It cannot be used with other Sensors.
Sensor I/O Connectors
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
Size
Cable
Appearance
Cable type
Straight
M12
(For -M1TJ models)
Connector on one end
2m
XS5F-D421-D80-A
5m
XS5F-D421-G80-A
2m
E39-ECON2M
5m
Connector on both ends
0.5 to 1 m
12 3 4
432 1
e-CON
432 1
Standard
cable
Model
1.1 to 1.5 m
1.6 to 2 m
4-wire
E39-ECON5M
E39-ECONW@M
Replace @ with the cable length in
0.1-m increments.
Note: When using Through-beam Sensors, order one connector for the Emitter and one for the Receiver.
5
E3T
Ratings and Specifications
Sensing method
Through-beam
Appearance
Rectangular type (Side-view)
Rectangular type (Flat)
Retro-reflective (without M.S.R. function)
Cylindrical
type
(Top-view)
Cylindrical
type
(Side-view)
Rectangular type
(Side-view)
Item
E3T-ST31
E3T-ST11
E3T-ST21
E3T-FT11
E3T-ST11M E3T-ST21M
E3T-FT21
---
---
E3T-SR41
Dark-ON
E3T-ST32
E3T-ST12
E3T-ST22
E3T-FT12
E3T-ST12M E3T-ST22M
E3T-FT22
E3T-CT12
E3T-CT22S
E3T-SR42
Light-ON
E3T-ST33
E3T-ST13
E3T-ST23
E3T-FT13
E3T-ST13M E3T-ST23M
E3T-FT23
---
---
E3T-SR43
E3T-ST34
E3T-ST14
E3T-ST24
E3T-FT14
E3T-ST14M E3T-ST24M
E3T-FT24
E3T-CT14
E3T-CT24S
E3T-SR44
Sensing distance
2m
1m
300 mm
1m
500 mm
200 mm [30 mm] *1 (Using the E39-R4)
100 mm [10 mm] *1 (Using the E39-R37CA)
Standard sensing object
Opaque, 3mm dia.
min.
Opaque, 2-mm dia. min.
Opaque, 1.3-mm dia. min.
Opaque, 4mm dia. min.
Opaque, 5mm dia. min.
Opaque, 27-mm dia. min.
Minimum detectable object
(typical)
Opaque, 3mm dia.
Opaque, 2-mm dia.
Opaque, 1.3-mm dia.
---
Hysteresis (white paper)
---
Black/white error
---
Directional angle
Emitter: 2 to 20°
Receiver: 2 to 70°
Emitter: 3 to 25°
Receiver: 3° min.
Receiver: 2°
Receiver: 10° 2 to 20°
Red LED
(630 nm)
Red LED
(625 nm)
NPN
output
PNP
output
Light-ON
Dark-ON
300 mm
500 mm
2-mm dia. (Sensing distance 100 mm)
Light source (wavelength)
Red LED (650 nm)
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p) 10% max.
Current consumption
30 mA max. (Emitter 10 mA max., Receiver 20 mA max.)
30 mA max. (Emitter 15 mA
max., Receiver 15 mA max.)
20 mA max.
Control output
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of
10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Load power supply voltage:
30 VDC max.
Load current: 80 mA max.
(residual voltage: 1 V max.)
Open-collector output
Load power supply voltage: 26.4 VDC
max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50
mA, 1 V max. for load current of less
than 10 mA)
Open-collector output
Protection circuits
Power supply and control output reverse polarity protection,
Output short-circuit protection
Power supply and control output reverse
Power supply reverse polarity
polarity protection, Output short-circuit
protection,
protection,
Output short-circuit protection
Mutual interference prevention
Response time
Operate or reset: 1 ms max.
Operate or reset: 0.5 ms max. Operate or reset: 1 ms max.
Ambient illumination
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Incandescent lamp: 3,000 lx
max.
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature
range
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: −25 to +55°C
Storage: −30 to +70°C
(with no icing or condensation)
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Ambient humidity range
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
Operating or Storage: 35% to
+85% (with no condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
AC1,000V, 50/60 Hz for 1 min.
AC500V, 50/60 Hz for 1 min.
AC1,000V, 50/60 Hz for 1 min.
Vibration resistance
(destruction)
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hours each
in X, Y, and Z directions
10 to 55Hz, 1.5-mm double
amplitude for 2 hours each in
X, Y, and Z directions
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hours each in X,
Y, and Z directions
Shock resistance
(destruction)
1,000 m/s2 3 times each in X, Y, and Z directions
500 m/s2 3 times each in X, Y,
and Z directions
1,000m/s2 3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC 60529)
IP65 (IEC 60529)
IP67 (IEC 60529)
Connection method
Pre-wired (standard length: 2 m)
Weight (packed state)
Approx. 20 g
Materials
Red LED (650 nm)
Approx. 40 g
Approx. 60 g
Case
PBT (polybutylene terephthalate)
SUS303
PBT (polybutylene terephthalate)
Display window
Denatured polyarylate
Polysulfone
Denatured polyarylate
Lens
Denatured polyarylate
Polysulfone
Methacrylc resin
Hexagonal nuts
---
SUS303
---
Toothed washers
---
SUS303
---
Instruction manual, Hexagonal nuts, Toothed washers
Instruction manual, Phillips screws
(M2×14),
Nuts, Spring washers, Flat washers,
E39-R4 (E3T-SR4@ only),
E39-R37-CA (E3T-SR4@-S only)
Accessories *2
Instruction manual, Phillips screws (Side-view Sensors: M2 × 14, Flat
Sensors: M2 × 8), Nuts, Spring washers, Flat washers *2
*1.Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. Only the Instruction Manual is included with an M3-mounting Sensor (E3T-ST@@M). Order the Set of Mounting Screws separately if required.
6
E3T
Sensing method
Diffuse-reflective
Appearance
Rectangular type (Flat)
Cylindrical type (Top-view)
Convergent-reflective
BGS-reflective
Rectangular type (Side-view)
Rectangular type (Flat)
Item
NPN
output
PNP
output
Light-ON
Dark-ON
Light-ON
Dark-ON
E3T-FD11
E3T-FD11M
E3T-FD12
E3T-FD12M
E3T-FD13
E3T-FD13M
E3T-FD14
E3T-FD14M
Sensing distance
5 to 30 mm
(50 × 50 mm white paper)
Standard sensing object
Minimum detectable
object (typical)
--0.15-mm dia.
(sensing distance 10 mm)
Hysteresis (white paper)
6 mm max.
Black/white error
Directional angle
Light source
(wavelength)
Power supply voltage
Current consumption
----Red LED (650 nm)
E3T-CD11
--E3T-CD13
--3 to 50 mm
(100 × 100 mm white paper)
E3T-SL11
E3T-SL11M
E3T-SL12
E3T-SL12M
E3T-SL13
E3T-SL13M
E3T-SL14
E3T-SL14M
5 to 15 mm
(50 × 50 mm
white paper)
E3T-SL21
E3T-SL21M
E3T-SL22
E3T-SL22M
E3T-SL23
E3T-SL23M
E3T-SL24
E3T-SL24M
5 to 30 mm
(50 × 50 mm
white paper)
E3T-FL11
E3T-FL21
E3T-FL12
E3T-FL22
E3T-FL13
E3T-FL23
E3T-FL14
E3T-FL24
1 to 15 mm
(50 × 50 mm
white paper)
1 to 30 mm
(50 × 50 mm
white paper)
---
0.15-mm dia.
(sensing distance 10 mm)
0.15-mm dia. non-glossy object
(sensing distance 10 mm)
15% or less of the sensing
distance
2 mm max.
0.5 mm max.
6 mm max.
2 mm max.
15% max.
Infrared LED (870 nm)
12 to 24 VDC ±10%, ripple (p-p) 10% max.
20 mA max.
Load power supply voltage: 26.4
VDC max.
Load power supply voltage: 30
Load current: 50 mA max. (reVDC max.
sidual voltage: 2 V max. for load
Control output
Load current: 80 mA max.
current of 10 to 50 mA, 1 V max.
(residual voltage: 1 V max.)
for load current of less than 10
Open-collector output
mA)
Open-collector output
Power supply and control output
Power supply reverse polarity
reverse polarity protection,
Protection circuits
protection,
Output short-circuit protection,
Output short-circuit protection
Mutual interference prevention
Response time
Operate or reset: 1 ms max.
Operate or reset: 0.5 ms max.
Incandescent lamp: 5,000 lx
Incandescent lamp: 3,000 lx
Ambient illumination
max., Sunlight: 10,000 lx max.
max.
Operating: −25 to +55°C
Operating: −25 to +55°C
Ambient temperature
Storage: −40 to +70°C
Storage: −30 to +70°C
range
(with no icing or condensation)
(with no icing or condensation)
Operating: 35% to +85%
Operating or Storage: 35% to
Ambient humidity range Storage: 35% to +95%
+85% (with no condensation)
(with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min. 500 VAC, 50/60 Hz for 1 min.
10 to 2,000 Hz,
10 to 55Hz, 1.5-mm double am1.5-mm double amplitude or
Vibration resistance
plitude for 2 hours each in X, Y,
(destruction)
300 m/s2 for 0.5 hours each in X,
and Z directions
Y, and Z directions
2
1,000 m/s 3 times each in X, Y, 500 m/s2 3 times each in X, Y,
Shock resistance
(destruction)
and Z directions
and Z directions
Degree of protection
IP67 (IEC 60529)
IP65 (IEC 60529)
Connection method
Pre-wired (standard length: 2 m)
Weight (packed state)
Approx. 20 g
Approx. 40 g
PBT (polybutylene terephthaSUS303
Case
late)
Display window Denatured polyarylate
Epoxy
MateriLens
Denatured polyarylate
Polysulfone
als
Hexagonal nuts --SUS303
Toothed wash--SUS303
ers
Instruction manual, Phillips
Instruction manual, Hexagonal
screws(M2 × 8), Nuts, Spring
nuts, Toothed washers, AdjustAccessories *
washers, Flat washers *
ment driver
Red LED (650 nm)
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Power supply and control output reverse polarity protection,
Output short-circuit protection,
Mutual interference prevention
Operate or reset: 1 ms max.
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
1,000 VAC, 50/60 Hz for 1 min.
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hours
each in X, Y, and Z directions
1,000m/s2 3 times each in X, Y, and Z directions
IP67 (IEC 60529)
Approx. 20 g
PBT (polybutylene terephthalate)
Denatured polyarylate
Denatured polyarylate
----Instruction manual, Phillips
screws(M2 × 14), Nuts, Spring
washers, Flat washers *
Instruction manual, Phillips
screws(M2 × 8), Nuts, Spring
washers, Flat washers
*Only the Instruction Manual is included with an M3-mounting Sensor (E3T-FD@@M or E3T-SL@@M). Order the Set of Mounting Screws separately if required.
7
E3T
Engineering Data (Typical)
M2-mounting and M3-mounting Sensors
Parallel Operating Range
Through-beam
E3T-ST3@ + E39-S63 Slit
(A Slit is mounted to the Emitter and Receiver.)
E3T-ST@@ + E39-E14 Mutual interference
prevention filter
E3T-ST1@(M) + E39-S63 Slit
(A Slit is mounted to the Emitter and Receiver.)
200
Without Slit
150
100 0.5-dia
Slit
Y
100
80
E3T-ST1@
60
40
50
1.0
2.0
3.0
1.0
1.5
−200
−100
100
1-dia Slit
0.5-dia Slit
0
0.4
1.2
1.6
2.0
Distance X (m)
−100
E3T-ST3@
−150
−200
E3T-FT1@ + E39-S64 Slit
(A Slit is mounted to the Emitter and Receiver.)
(A Slit is mounted to the Emitter and Receiver.)
Y
60
X
40
0.5-dia Slit
Distance Y (mm)
80
1-dia Slit
(A Slit is mounted to the Emitter and Receiver.)
Distance Y (mm)
Distance Y (mm)
E3T-ST1@(M) + E39-S63 Slit (Enlarged graph) E3T-ST2@(M) + E39-S63 Slit
25
20
Without Slit
15
Y
1-dia Slit
10
X
20
200
Y
150
X
100
50
5
0.5-dia Slit
0.5-dia Slit
0
0
−20
200
400
600
−5
40
80
120
160
200
Distance X (mm)
800
Distance X (mm)
−60
−25
−80
(A Slit is mounted to the Emitter and Receiver.)
X
40
0.5-dia Slit
80
1-dia Slit
60
Without Slit
40
Y
20
20
0
0.5-dia Slit
40
80
120
−20
0
160
200
Distance X (mm)
200
X
20
E3T-SR4@+E39-R4
10
X
400
800
0
Distance X
(mm)
−10
600
−20
−40
−60
−60
−30
−80
−80
−40
E3T-SL1@(M)
3
Y
2
0
−1
−2
−3
−4
X
Sensing object:
50 x 50 mm white paper
Y
10
5
1
20
30
40
−5
Distance X
(mm)
−10
−15
200
300
400
Distance X (mm)
4
3
Sensing object:
50 x 50 mm white paper
X
Y
2
1
0
0
10
100
E3T-SR4@+E39-R37-CA
E3T-SL2@(M)
15
Distance Y (mm)
X
Distance Y (mm)
Convergent-reflective
E3T-FD1@(M)
Distance Y (mm)
Operating Range
Diffuse-reflective
Y
30
−20
Sensing object:
50 x 50 mm white paper
1-dia Slit
40
−40
4
0.8
1
1.2
1.4
Without Slit Distance X (m)
Retro-reflective
E3T-SR4@
Distance Y (mm)
Distance Y (mm)
(A Slit is mounted to the Emitter and Receiver.)
Distance Y (mm)
E3T-FT2@ + E39-S64 Slit
1-dia Slit
0.6
−200
E3T-FT1@ + E39-S64 Slit (Enlarged graph)
60
0.4
−150
−20
Y
0.2
−50
−100
−15
80
0
−10
−40
8
0.8
−50
−60
−80
X
Without Slit
2.0
2.5
Distance X (m)
−40
−150
Y
150
X
0.5
−20
−100
200
50
0
4.0
5.0
Distance X (m)
−50
Y
20
X
1.0-dia Slit
0
Distance Y (mm)
Distance Y (mm)
Distance Y (mm)
(A Slit is mounted to the Emitter and Receiver.)
10
20
30
40
−1
5
10
15
20
25
30
Distance X
(mm)
Distance X (mm)
−2
−3
−4
E3T
Inclination Detection Area Characteristic
Convergent-reflective
BGS-reflective
5
4
3
2
X
Sensing object:
50 x 50 mm white paper
E3T-SL1@(M) (Top to Bottom)
Distance (mm)
E3T-FL2@
Distance Y (mm)
Distance Y (mm)
E3T-FL1@
10
8
6
Sensing object:
50 x 50 mm white paper
4
20
Stainless steel
Glass
t: 0.7 mm
X
Y
Y
1
2
10
0
2
4
6
8
10
12
14
Distance X (mm)
−1
5
10
15
20
25
−4
−3
−6
−4
−8
−5
−10
30
35
Distance X (mm)
−2
−2
+θ −θ
0
−10
E3T-SL2@(M) (Top to Bottom)
Distance (mm)
20
Stainless steel
10
0
Angle of
inclination
10
Angle θ (°)
E3T-SL2@(M) (Right to Left)
40
Distance (mm)
E3T-SL1@(M) (Right to Left)
Distance (mm)
0
16
30
Glass
t: 0.7 mm
20
40
Stainless steel
30
Angle of
20
+θ −θ inclination
Stainless steel
0
−10
10
10
Glass
t: 0.7 mm
+θ −θ
0
Angle of
inclination
Angle of
+θ −θ inclination
0
−10
10
Angle θ (°)
0
Glass
t: 0.7 mm
0
−10
10
Angle θ (°)
0
10
Angle θ (°)
BGS-reflective
Angle of
inclination
White paper
Center
line
+θ
−θ
10
E3T-FL2@ (Top to Bottom)
20
Angle of
inclination
White paper
+θ
−θ
Center
line
Distance (mm)
E3T-FL1@ (Right to Left)
20
Distance (mm)
Distance (mm)
E3T-FL1@ (Top to Bottom)
40
Angle of
inclination
White
paper
30
Center
line
+θ
−θ
20
10
Glass
t: 0.7 mm
Glass
t: 0.7 mm
Glass
t: 0.7 mm
10
Stainless steel
Stainless steel
Stainless steel
0
−10
0
0
−10
10
Angle θ (°)
0
0
−10
10
Angle θ (°)
0
10
Angle θ (°)
Excess Gain vs. Set Distance
Through-beam
E3T-ST1@(M)/E3T-ST3@
30
Angle of
inclination
White paper
Center
line
+θ
−θ
E3T-ST2@(M)
100
Excess gain ratio
40
Excess gain ratio
Distance (mm)
E3T-FL2@ (Right to Left)
50
30
E3T-ST3@
10
10
10
3
Operating
level 1
Glass
t: 0.7 mm
6
E3T-ST1@(M)
4
0.5
0.3
2
Operating
1
level
Stainless steel
0
−10
12
8
5
20
14
0
10
Angle θ (°)
0.1
0
1000
2000
3000
4000
Set distance (mm)
0
0
300
600
900
1200
Set distance (mm)
9
E3T
Retro-reflective
E3T-FT2@
50
30
10
E3T-SR4@
14
Excess gain ratio
100
Excess gain ratio
Excess gain ratio
E3T-FT1@
12
10
100
50
30
E3T-SR4@+E39-R4
10
8
5
5
3
3
6
Operating
level 1
Operating
level 1
0.5
0.5
0.3
0.3
2
Operating
1
level
0.1
0
400
800
1200
1600
0
0
2000
500
1000
1500
Diffuse-reflective
Convergent-reflective
E3T-FD1@(M)
E3T-SL1@(M)
Excess gain ratio
30
10
100
50
30
White paper
5
0.1
0
10
20
30
0.1
40
White paper
0.5
0.5
0.3
Black paper
10
Operating
level 1
Operating
level 1
0.3
30
3
5
3
0.5
50
5
10
3
300
100
White paper
Operating
level 1
200
E3T-SL2@(M)
1000
500
300
50
100
Set distance (mm)
Excess gain ratio
100
0.1
0
2000
Set distance (mm)
Set distance (mm)
Excess gain ratio
E3T-SR4@+E39-R37-CA
4
Black paper
0.3
Black paper
0
5
10
15
Set distance (mm)
0.1
20
0
10
20
Set distance (mm)
30
Sensing Distance vs. Material
Convergent-reflective
E3T-SL1@(M)
E3T-SL1@(M)
1.6
1.2
10
Sensing distance (mm)
E3T-FD1@(M)/E3T-SL2@(M)
Min. sensing object dia. (mm)
Min. sensing object dia. (mm)
Sensing Object Size vs. Sensing Distance
Convergent-reflective
Diffuse/Convergent-reflective
2.0
Sensing object: Pin-gauge, stainless steel
8
6
40
Set distance (mm)
25
20
15
E3T-FD1@(M)
0.8
4
0.4
2
10
5
E3T-SL2@(M)
40
30
BGS-reflective
E3T-FD1@(M)
E3T-FL1@
70
60
50
40
Black
paper
Black
rubber
0
30
Sensing distance (mm)
50
25
Diffuse-reflective
Sensing distance (mm)
Sensing distance (mm)
E3T-SL2@(M)
20
Set distance (mm)
Glass
sheet
15
Glass
sheet
10
Cardboard
5
Cardboard
0
20
Plywood
15
Set distance (mm)
Plywood
10
Stainless
5
White
paper
0
Material
20
15
10
30
20
20
5
10
10
Black
paper
Black
rubber
Stainless
Material
0
White
paper
Black
paper
Black
rubber
Glass
sheet
Cardboard
Plywood
Stainless
Material
0
White
paper
Black
rubber
Glass
sheet
Cardboard
Plywood
Stainless
White
paper
0
Black
paper
10
Material
E3T
Sensing Distance Characteristics of Sensitivity Adjustment Unit
(when Completing Optical Axis Adjustment)
E3T-ST1@ + E39-E10 Sensitivity Adjustment Unit
E3T-ST3@ + E39-E10 Sensitivity Adjustment Unit
40
Sensing distance (m)
Sensing distance (mm)
E3T-FL2@
30
3.5
3.0
2.5
E3T-ST3@
2.0
20
1.5
1.0
10
E3T-ST1@
0.5
Black
paper
Black
rubber
Glass
sheet
Cardboard
Plywood
Stainless
0
White
paper
0
Min
1/3
1/2
2/3
Max
Adjustment dial angle
Material
Small Cylindrical Sensors
Parallel Operating Range
Through-beam
80
60
X
40
200
E3T-CT2@S (Right to Left)
Distance Y (mm)
E3T-CT2@S (Top to Bottom)
Distance Y (mm)
Distance Y (mm)
E3T-CT1@
X
Y
150
100
Y
50
20
0
0.25
0.5
0.75
1.0
−20
0
1.25
1.5
1.75
Distance X (m)
X
150
100
0.1
0.2
0.3
0.4
0.5
−50
0.6
0.7
0.8
Distance X (m)
0
−50
−40
−100
−100
−60
−150
−150
−80
−200
−200
Diffuse-reflective
E3T-CD1@
E3T-CD1@
−15
−20
30
40
50
60
70
80
Distance X (m)
0.6 0.7
0.8
Distance X (m)
70
60
50
40
30
20
10
0
Black
paper
−10
20
0.5
80
Black
rubber
−5
10
0.4
90
Glass
sheet
0
0.3
100
Cardboard
5
0.2
110
Plywood
10
0.1
120
Stainless
Y
White
paper
X
Sensing object:
15 100 x 100 mm white paper
Sensing distance (mm)
Sensing Distance vs. Material
Diffuse-reflective
20
Y
50
Operating Range
Distance Y (mm)
200
Material
11
E3T
I/O Circuit Diagrams
NPN Output
Model
Operation mode
Timing charts
Output circuit
Through-beam Receivers and Reflective Sensors
Brown
Light incident
Light interrupted
Operation
indicator
(orange)
Operation indicator ON
OFF
(orange)
E3T-@@@1
E3T-@@@1M
Light-ON
Output
transistor
Photoelectric
Sensor
Main
Circuit
ON
OFF
Load
(e.g., relay)
Operate
Reset
(Between brown (1)
and black (4) leads)
12 to 24 VDC
1
Stability
indicator
(green)
(Control output)
*1
Black
Load
(relay)
50 mA
max.*2
4
ZD
Blue
3
0V
Connector Pin Arrangement*3
M12
e-CON
Through-beam Emitters
1
1
Brown
1
2
4
2
3
Photoelectric
Sensor
Main
Circuit
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
E3T-@@@2
E3T-@@@2M
E3T-@@@2S
Dark-ON
Output
transistor
Blue
3
4
3
ON
OFF
Load
(e.g., relay)
12 to 24 VDC
Operate
Reset
(Between brown (1)
and black (4) leads)
*1.There is no diode for Small Cylindrical Sensors Note: Pin 2 is not used.
Pins 2 and 4 are not
(E3T-C@@@(S)).
used with Through*2. This is 80 mA max. for Small Cylindrical Sensors
beam Emitters.
(E3T-C@@@(S)).
*3. These connectors do not apply to the E3T@@@@M and E3T-C@@@(S).
PNP Output
Model
Operation mode
Timing charts
Output circuit
Through-beam Receivers and Reflective Sensors
Brown
Light incident
Light interrupted
Operation
indicator
(orange)
Operation indicator ON
(orange)
OFF
E3T-@@@3
E3T-@@@3M
Light-ON
Output
transistor
Load
(e.g., relay)
Photoelectric
Sensor
Main
Circuit
ON
OFF
12 to 24 VDC
1
Stability
indicator
(green)
ZD
Black
4
50 mA
max.*2
(Control output) *1
3
Load
(relay)
Blue
0V
Operate
Reset
(Between blue (3)
and black (4) leads)
Connector Pin Arrangement*3
M12
e-CON
Through-beam Emitters
Brown
2
4
2
3
Photoelectric
Sensor
Main
Circuit
Light incident
Light interrupted
1
1
1
12 to 24 VDC
Blue
E3T-@@@4
E3T-@@@4M
E3T-@@@4S
Operation indicator ON
(orange)
OFF
Dark-ON
Output
transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
3
4
3
*1.There is no diode for Small Cylindrical Sensors Note: Pin 2 is not used.
Pins 2 and 4 are not
(E3T-C@@@(S)).
used with Through*2. This is 80 mA max. for Small Cylindrical Sensors
beam Emitters.
(E3T-C@@@(S)).
(Between blue (3)
and black (4) leads) *3. These connectors do not apply to the E3T@@@@M and E3T-C@@@(S).
Plugs (Sensor I/O Connectors)
3
1
4
1
2
3
4
Wire color
Brown
White
Blue
Black
E39-ECON@M
12 3 4
XS5F-D421-D80-A (cable length: 2 m)
XS5F-D421-G80-A (cable length: 5 m)
Classification
432 1
2
Pin arrangement
e-CON connector
432 1
M12 Connector
E39-ECONW@M
Wire
color
Connector
pin No.
Application
Brown
1
Power supply (+V)
White
2
---
Blue
3
Power supply (0 V)
Black
4
Output
DC
Note: Pin 2 is not used. Pin 2 and 4 are not used
with Through-beam Emitters.
12
E3T
Safety Precautions
Refer to Warranty and Limitations of Liability.
● Adjusting
Indicators
WARNING
This product is not designed or rated for ensuring
safety of persons. Do not use it for such purpose.
• The following graphs indicate the status of each operating level.
• Be sure to use the E3T within the stable operating range.
Stability
indicator
(green)
Light
Do not apply AC power to the E3T, otherwise the E3T
may rupture.
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
● Wiring
The maximum power supply voltage is 26.4 VDC. Before turning the
power ON, make sure that the power supply voltage be not more than
maximum voltage.
Load short-circuit protection
The E3T incorporates a load short-circuit protection function. If the
load short-circuits, the output of the E3T will be turned OFF. Then,
recheck the wiring and turn on the E3T again to reset the load shortcircuit protection function. The load short-circuit protection function
will work if there is a current flow that is 1.5 times larger than the rated
load current. When using a capacitance load, be sure that the inrush
current will not exceed 1.5 times larger than the rated current.
Stable
operation
range*
Operating
level x 1.2
Unstable
Operating
operation
level
range*
Operating
level x 0.8
Stable
operation
range*
Operation indicator (orange)
E3T-@@@1
E3T-@@@2
E3T-@@@3
E3T-@@@4
ON
ON
OFF
OFF
ON
OFF
ON
* If
the E3T fs operating level is set to the stable operation range, the
E3T will be in most reliable operation without being influenced by
temperature change, voltage fluctuation, dust, or setting change. If
the operating level cannot be set to the stable operation range, pay
attention to environmental changes while operating the E3T.
Use of E39-E10 Sensitivity Adjustment Unit
(Dark-ON: E3T-ST12)
(At Min)
(At Center)
(At Max.)
Indicator
Adjuster
● Mounting
When mounting the Sensor, never strike it with a heavy object, such
as a hammer. Doing so may reduce its watertight properties. Use
screws with spring, flat, or toothed washers to secure the Sensor.
Tightening Torque
M2-mounting Sensors: 0.15 N·m max
M3-mounting Sensors: 0.5 N·m max
Small Cylindrical Sensors: 1 N·m max
Mounting the Sensor on Moving Parts
Consider models that use break
resistant cables (e.g., Robotics
Cables) if the Sensor will be
mounted on a moving part, such as a
robot hand. The flexing resistance of
Robotics Cable at approximately 400
thousand times is far superior to that
of standard cable at approximately
14 thousand times.
B
A
C
θ
θ
Note: If the light attenuation rate due to a workpiece is 40% or less, the stability
indicator will not turn ON whether or not light is received. When the
variation of light is small such as when sensing semi-transparent
workpieces, carefully perform preliminary testing.
R
Cable Bending Rupture Test
(Tough Cable Breaking Test)
The cable is repeatedly bent with
power supplied to check the number
of bends until the current is turned
OFF.
Specimen
Test
Contents/
conditions
E3T-CD@@ Sensitivity Adjustment
Weight
Use the special screwdriver that is provided with the Sensor to adjust
the sensitivity. Do not exceed 0.8 N·m when turning the adjuster.
● Others
Do not install the E3T in the following locations.
Robotics cable
2.4-mm dia.
(20/0.08-mm dia.),
3 conductors
Bending angle (θ)
90° each to the left and right
Bending speed
50 times/min
Load
200 g
Operation per bend
Once in 1 to 3 in the diagram
Curvature radius of
support point (R)
Result
Standard cable
2.4-mm dia.
(7/0.127-mm dia.),
3 conductors
1. Mount the Unit on the Receiver.
2. Set the adjuster of the Sensitivity Adjustment Unit to Max.
(Before shipping: Max.)
3. After mounting on the Sensor, adjust the optical axis and secure the
Sensor.
4. Place a workpiece between the Emitter and Receiver and gradually
turn the adjuster counterclockwise toward the Min. side. Stop
turning the adjuster when the operation indicator and stability
indicator (green) turn ON.
5. Remove the workpiece and confirm that the operation indicator is
OFF and the stability indicator (green) is ON. This completes the
adjustment.
5 mm
• Locations subject to excessive dust or dirt
• Locations subject to direct sunlight
• Locations subject to corrosive gas
• Locations subject to contact with organic solvents
• Locations subject to vibration and shock
• Locations subject to contact with water, oil, or chemicals
• Locations subject to high humidities that might result in
condensation
Approx. 14,000 times Approx. 400,000 times
13
E3T
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
M2-mounting Sensors
Through-beam Side-view Sensors
E3T-ST1@ (Emitter)
E3T-ST2@ (Emitter)
7
E3T-ST3@ (Emitter)
9.5
7.7
Mounting Holes
3.8
Two, M2 holes
2.7
Emitter
lens
(1.3 dia.)
14.6
9
9±0.2
Two, 2.2 dia. *
2.2
Emitter: E3T-ST@@-L
Receiver: E3T-ST@@-D
3.9
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4.8
*The mounting holes are made of SUS301.
M12 Smartclick Pre-wired Connector Model
(E3T-ST@@-M1TJ/E3T-FT@@-M1TJ)
E3T-ST1@ (Receiver)
E3T-ST2@ (Receiver)
E3T-ST3@ (Receiver)
Operation
indicator
7
9.5
Stability
indicator
Mounting Holes
Two, M2 holes
2.7
14.6
9
The receiver lens diameters
are given below.
Model
(1.3 dia.)
E3T-ST3@-D
(2.4 dia.)
4.8
*The mounting holes are made of SUS301.
3.5
12
Mounting Holes
Emitter
lens
(1.3 dia.)
Two, M2 holes
14
8.6
15.8
8±0.2
Two, 2.2 dia. *
3.2
1.75
4.4
8
Emitter: E3T-FT@@-L
Receiver: E3T-FT@@-D
*The mounting holes are made of SUS301.
E3T-FT1@ (Receiver)
E3T-FT2@ (Receiver)
Operation indicator
12
14
8.6
Two, 2.2 dia. *
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Stability indicator
3.5
Mounting Holes
Two, M2 holes
Receiver
lens
(1.3 dia.)
15.8
8±0.2
3.2
4.4
1.75
8
*The mounting holes are made of SUS301.
14
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
5.9
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
2.2
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4
e-CON Pre-wired Connector Model
(E3T-ST@@-ECON/E3T-FT@@-ECON)
Two, 2.2 dia. * 3.9
Through-beam Flat Sensors
E3T-FT1@ (Emitter)
E3T-FT2@ (Emitter)
3
M12
9±0.2
Receiver
lens *
Receiver lens
diameter
E3T-ST1@-D
E3T-ST2@-D
1
7.7
3.8
*
2
1
2
3
4
15
15.6
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard lengths: 0.3 m and 2 m
Terminal No.
Specifications
1
+V
2
---
3
0V
4
Output
(receiver only)
*Refer to Mounting the Sensor on
Moving Parts on page 13 for
details on Robotics Cable
models.
E3T
Retro-reflective Side-view Sensors
E3T-SR4@
Mounting Holes
Two, M2 holes
Operation
indicator
Stability
indicator
7
11
9.2
15±0.2
3.8
4.5
20.6
15
Lens
(2.0 dia.)
Two, 2.2 dia. *
3.9
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
3.7
6.3
M12 Smartclick Pre-wired Connector Model
(E3T-SR@@-M1TJ/E3T-FD@@-M1TJ/
E3T-SL@@-M1TJ)
2
1
3
4
*The mounting holes are made of SUS301.
M12
Diffuse-reflective Flat Sensors
E3T-FD1@
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard length: 0.3 m
Operation
indicator
Stability
indicator
12
e-CON Pre-wired Connector
(E3T-SR@@-ECON/E3T-FD@@-ECON/
E3T-SL@@-ECON)
3.5
Mounting Holes
Emitter lens
(1.5 dia.)
4
Receiver
lens (2.0 dia.)
13.4
19
5.9
1
2
3
4
Two, M2 holes
20.8
15.6
8±0.2
Two, 2.2 dia. *
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
3.2
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4.4
8
1.75
*The mounting holes are made of SUS301.
Convergent-reflective Side-view Sensors
E3T-SL1@
E3T-SL2@
Operation
indicator
15
7
11
9.2
Stability
indicator
Mounting Holes
Terminal SpecifiNo.
cations
1
+V
2
---
3
0V
4
Output
*Refer to Mounting the Sensor on
Moving Parts on page 13 for
details on Robotics Cable
models.
Two, M2 holes
3.8
Emitter lens
(4.0 dia.)
4
5
15
Receiver lens
(4.0 dia.)
20.6
15±0.2
Two, 2.2 dia. * 3.9
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
3.7
6.3
*The mounting holes are made of SUS301.
15
E3T
BGS-reflective Flat Sensors
E3T-FL1@
E3T-FL2@
M12 Smartclick Pre-wired Connector Model
(E3T-FL@@-M1TJ)
1
2
3
4
M12
Operation
indicator
Stability
indicator
12
3.5
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard length: 0.3 m
Receiver lens
(2.8 square)
6
Emitter lens
(1.5 dia.)
19
Two, 2.2 dia. *
3.2
15
15.6
8±0.2
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
1.75
4.4
5.9
1
2
3
4
Two, M2 holes
7.4
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
e-CON Pre-wired Connector
(E3T-FL@@-ECON)
Mounting Holes
20.8
8
*The mounting holes are made of SUS301.
Terminal No.
Specifications
1
2
3
4
+V
--0V
Output
*Refer to Mounting the Sensor on Moving Parts on
page 13 for details on Robotics Cable models.
M3-mounting Sensors
Through-beam Side-view Sensors
E3T-ST1@M (Emitter)
E3T-ST2@M (Emitter)
Mounting Holes
12.8
10
7
Two, M3 holes
3
6.5
Emitter
lens
(1.3 dia.)
13
22
13±0.2
Two, 3.2 dia. *
2.5
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
3.9
6.3
Emitter: E3T-ST@@M-L
Receiver: E3T-ST@@M-D
*The mounting holes are made of SUS304.
E3T-ST1@M (Receiver)
E3T-ST2@M (Receiver)
Operation
indicator
7
Mounting Holes
12.8
Stability
indicator
10
Two, M3 holes
3
6.5
13
Receiver
lens
(1.3 dia.)
13±0.2
22
Two, 3.2 dia. *
2.5
3.9
6.3
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
*The mounting holes are made of SUS304.
16
E3T
Diffuse-reflective Flat Sensors
E3T-FD1@M
Operation
indicator
Stability
indicator
12.6
4
Mounting Holes
Two, M3 holes
4
Emitter lens
(1.5 dia.)
10±0.2
20.4
14.8 23.4
Receiver
lens (2.0 dia.)
Two, 3.2 dia. *
3.1
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4.2
10
16
3.5
*The mounting holes and plate are made of
SUS304.
Convergent-reflective Side-view Sensors
E3T-SL1@M
E3T-SL2@M
Operation
indicator
Mounting Holes
7
Two, M3 holes
12.8
10
Stability
indicator
3
4.8
16±0.2
Emitter lens
(4.0 dia.)
5
16
Receiver lens
(4.0 dia.)
22
2.5
3.9
Two, 3.2 dia. *
6.3
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
*The mounting holes are made of SUS304.
Small Cylindrical Sensors
Through-beam Top-view Sensors
E3T-CT1@ (Emitter)
10 dia.
Toothed
washer
Two, hexagonal nuts (M5)
26.2
8
Mounting Hole
3.5
5.6 dia.
4.4
Optical
axis
(1.8)
2.5
M5×0.5
Emitter: E3T-CT1@-L
Receiver: E3T-CT1@-D
10 dia.
E3T-CT1@ (Receiver)
8
+0.5
9.7
Two, hexagonal nuts (M5)
Optical
axis
2.5-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.15 mm² (AWG25),
Insulator diameter: 0.8 mm),
Standard length: 2 m
5.5 −0
2.7-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.15 mm² (AWG25),
Insulator diameter: 0.85 mm),
Standard length: 2 m
Toothed
washer
26.2
3.5
Mounting Hole
5.6 dia.
4.4
(1)
Stability
indicator
Operation
Indicator
2.5
+0.5
9.7
5.5 −0
M5×0.5
17
E3T
Through-beam Side-view Sensors
E3T-CT2@S (Emitter)
Toothed
washer
Two, hexagonal nuts (M5)
10 dia.
27.2
6.2
8
13.1
Mounting Hole
3.5
2.2
5.6 dia.
Optical
axis
+0.5
2.5
2.5-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.15 mm² (AWG25),
Insulator diameter: 0.8 mm),
Standard length: 2 m
9.7
M5×0.5
Toothed
washer
Two, hexagonal nuts (M5)
Emitter: E3T-CT2@S-L
Receiver: E3T-CT2@S-D
10 dia.
Operation
indicator
27.2
6.2
8
13.1
5.5 −0
2.7-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.15 mm² (AWG25),
Insulator diameter: 0.85 mm),
Standard length: 2 m
Mounting Hole
3.5
2.2
E3T-CT2@S (Receiver)
5.6 dia.
Stability
indicator
Optical
axis
+0.5
5.5 −0
2.5
9.7
M5×0.5
Diffuse-reflective Top-view Sensors
E3T-CD1@
Sensitivity adjuster
22.6
19.9
Stability
indicator
Mounting Hole
dia
.
2.8
2.4
Two, hexagonal nuts (M6)
11 dia.
+0.5
Operation
indicator
Toothed
washer
6.5 −0
M6×0.75
8
12
6.8 dia.
Optical
axis
(1.2)
17
2.7-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.15 mm² (AWG25),
Insulator diameter: 0.85 mm),
Standard length: 2 m
6.5
29.1
Accessories
Reflector (Provided with E3T-SR4@)
E39-R4
13.7
9.7
4.9
8.7
4.7
14
23
19
18
4
Material, reflective surface: acrylic
Rear surface: ABS
Two, 2.2 dia.
1.4
4
Reflector (Provided with E3T-SR4@-S)
E39-R37-CA
Mounting bracket
Reflector
13.7
8.7
(1.1)
13.7
Reflective
surface:
acrylic
23 18.3 10.2
18.3 23
Mounting
Bracket:
t 0.5
Material: Mounting plate: stainless
steel (SUS301)
Reflective surface: acrylic
18
Reflector: t 0.5
(adhesive tape side)
Two, R1.55
Two, 3.1 dia.
Note: The reflective plate and mounting plate (1) come as a set.
E3T
Accessories (Order Separately)
Tape Reflectors
E39-RS1-CA
E39-RS3-CA
35
0.5
80
10
0.5
Four, R1 Adhesive tape side
Material: Acrylic
E39-RS2-CA
70
40
0.5
35
Four, R1
Material: Acrylic
Adhesive tape side
Four, R1 Adhesive tape side
Material: Acrylic
Mutual Interference Prevention Filter
for E3T-ST3@/ST1@ Through-beam
Sensors
E39-E14
Slit for E3T-ST@@ Through-beam
Sensors
E39-S63
With Slit Attachment
With Filter Attachment
9.9
8.1
7.4
7.4
9.7
1.0±0.05 dia.
3.8
3 dia.
Slit for E3T-FT@@ Through-beam
Sensors
E39-S64
With Slit Attachment
Two, 2.2 dia.
0.5±0.05 dia.
12.3
(4.1)
2.7
12.6
2.7 9
18.5
Optical
axis
2.7
Notch
12
1 dia.
Note: Align the notch direction
Material: 0.2-mm
of the Slit when
thick stainless steel
installing on the Emitter
(SUS301)
and Receiver.
8.1
Material: 0.2-mm thick stainless steel (SUS301)
0.5-dia Slit for E3T-ST@@M
Through-beam Sensors
E39-S76A
1-dia Slit for E3T-ST@@M
Through-beam Sensors
E39-S76B
With Slit Attachment
13.2
13.2
10.4
7.4
0.5±0.05 dia.
19
Material: 0.1-mm thick stainless steel (SUS301)
Sensitivity Adjustment Unit
for E3T-ST1@/ST3@
Through-beam Sensors
E39-E10
With Slit Attachment
13.2
13.2
10.4
7.4
Two,
3.2 × 3.4
6.5
0.5 dia.
With Sensitivity Adjustment
Unit Attachment
5.8
Two,
3.2 × 3.4
90°
7.4
1.0±0.1 dia.
(10.1)
6.5
4
19
12.2
12.2
(15.1)
Optical
axis
Material: 0.2-mm thick stainless steel (SUS301)
Material: 0.2-mm thick stainless steel
(SUS301)
2 dia.
18.7
Adjuster
9.7
Material: stainless steel (SUS301)
19
E3T
Mounting Bracket for M2-mounting Side-view Sensors
E39-L116
(17.8)
(Two, R1.7)
7.5
Two, 3.4
4.1
1.6
(Two, R2)
(Two, R2)
5
4
2.2
11
Material: 1.2-mm-thick
stainless steel
(SUS304)
(10.3)
(Two, R1.1)
31.2 9.5
9.7
6.2
90°
17.8
(Two, R1.2)
2.4
1.2
R1.5 max.
With Mounting Bracket (Example: E3T-ST11)
10
(Four, R2)
7.7
Two, M2 × 14
Three, M2
3
9
20.5 15
31
31.2
24.5
7
Mounting Bracket for M2-mounting Side-view Sensors
E39-L117
R1 max.
90°
1.2
(Two, R1.7)
(Two, R2)
Two, R2
2.4
11.2
3.1
Material: 1.2-mm-thick stainless
steel (SUS304)
4
9
11.5 18
15
(23)
9
3.1
3.4
Two, 2.2
(10.3)
5
(Two, R1.7)
5
4.5
(Two, R1.1)
10
(11.2)
11.2
7.7
With Mounting Bracket (Example: E3T-ST11)
Two, M2 × 14
(Four, R2)
Three, M2
11.2
10.2
3
9
20.5 15
23
16.3
7
20
6.2
E3T
Mounting Bracket for M2-mounting Side-view Sensors
E39-L118
1.2
11.5
90°
11.5
90°
22.7
(Two, R1.7)
5
2.4 4.5
3.1
4
Material: 1.2-mm-thick stainless
steel (SUS304)
9
11.5 18
15
(23)
9
Two, 2.2
3.1
5
3.4
(Two, R1.1)
(Four, R2)
7.7
With Mounting Bracket (Example: E3T-ST11)
(Four, R2)
Two, M2 × 14
Three, M2
13.2
3
9
20.5 15
23
16.3
7
Mounting Bracket for M2-mounting Flat Sensors
E39-L119
With Mounting Bracket
(Example: E3T-FT11)
1.2
90°
10.5
15
Four, M2 tapped holes
3.2
8
9
3.5
7
2.4
16
12
8
10.6
Material: 1.2-mm-thick stainless
steel (SUS304)
2.4
9
7
Mounting Bracket for M2-mounting Flat Sensors
E39-L120
Two, M2 × 8
With Mounting Bracket
(Example: E3T-FT11)
4.2
(6.4)
(5.4)
14
1.2
22.5
Four, M2 tapped holes
8
13.5
3.2
2.4
Material: 1.2-mm-thick stainless
16
steel (SUS304)
12
8
10.6
2.4
6
13.5
Two, M2 × 8
21
E3T
Mounting Bracket for M3-mounting Side-view Sensors
E39-L166
1.2
13.5
90°
4.5
3.4
3
2.8
3.1
3.2
14.5
11.5
23
Material: 1.2-mm-thick stainless
steel (SUS304)
(12.6)
3.1
3
Two, R2
3.2
6.5
13.5
13.8
(15)
With Mounting Bracket
(Example: E3T-ST11M)
8
4
Three, M3
3
16
12.9
12.5
22
10
8.5
15
Two, M3 × 15
23
13.5
Mounting Bracket for M3-mounting Flat Sensors
E39-L167
With Mounting Bracket
(Example: E3T-FD11M)
(6.5)
5
(10.5)
1.5
18
29
Four, M3 tapped holes
3.2
10
17
2.4
23.5
17.5
14.5
Material: 1.5-mm-thick stainless
steel (SUS304)
17.8
13.8
2.4
Two, M3 × 6
17
Back-mounting Spacer for M3-mounting Flat Sensors
E39-L168
12.6
28.7
0.3
4
14.8
10.8
8.3
Material: PBT (polybutylene
terephthalate)
10
16
22
(7.3)
Note: Use this Spacer when mounting the Sensor from the back.
E3T
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or
comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in
its entirety.
23
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Cor poration 2010 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_3_1_1210
Printed in Japan
Cat. No. E407-E1-01
(1010)
Similar pages