2SC4682 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC4682 Strobe Flash Applications Medium Power Amplifier Applications • Unit: mm Excellent hFE linearity : hFE (1) = 800 to 3200 (VCE = 1 V, IC = 0.5 A) : hFE (2) = 500 (typ.) (VCE = 1 V, IC = 3 A) • Low saturation voltage: VCE (sat) = 0.5 V (max) (IC = 3 A, IB = 30 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit VCBO 30 V VCES 30 V (BR) CEO 15 VEBO 6 DC IC 3 Pulse ICP 6 Base current IB 0.8 A Collector power dissipation PC 900 mW Junction temperature Tj 150 °C Tstg −55 to 150 °C Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Storage temperature range V V A JEDEC TO-92MOD JEITA TOSHIBA ― 2-5J1A Weight: 0.36 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-10 2SC4682 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 30 V, IE = 0 ― ― 1 μA Emitter cut-off current IEBO VEB = 6 V, IC = 0 ― ― 10 μA V (BR) CEO IC = 10 mA, IB = 0 15 ― ― V Collector-emitter breakdown voltage hFE (1) VCE = 1 V, IC = 0.5 A 800 ― 3200 hFE (2) VCE = 1 V, IC = 3 A 300 500 ― VCE (sat) IC = 3 A, IB = 30 mA ― 0.25 0.5 V Base-emitter voltage VBE VCE = 1 V, IC = 3 A ― 0.85 1.2 V Transition frequency fT VCE = 1 V, IC = 0.5 A ― 150 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― 30 ― pF DC current gain Collector-emitter saturation voltage Collector output capacitance Cob Marking C4682 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-10 2SC4682 IC – VCE hFE – IC 10000 6 Common emitter Ta = 25°C 5 5m (A) Collector current IC DC current gain hFE Common emitter 4m 4 3m 3 2m 2 1m 25 −25 1000 100 0.01 500 μ 1 0.1 2 6 4 8 Collector-emitter voltage 10 (A) 10 VCE (V) VCE (sat) – IC IC – VBE 10 8 Common emitter Common emitter IC/IB = 200 VCE = 1 V (A) 3 Collector current IC Collector-emitter saturation voltage VCE (sat) (mV) 1 Collector current IC IB = 100 μA 0 0 VCE = 1 V Tc = 100°C 1 0.3 0.1 6 4 2 Tc = 100°C Tc = 100°C 0.03 0 0 −25 0.01 0.01 25 −25 25 0.03 0.1 0.3 1 Collector current IC 3 0.2 0.6 0.4 0.8 Base-emitter voltage 10 1.0 1.2 1.4 VBE (V) (mA) Safe Operating Area 10 IC max (pulsed)* 1 ms* 5 3 PC – Ta IC max (continuous) 10 ms* Collector current IC Collector power dissipation PC (W) (A) 1.0 0.8 0.6 0.4 0.5 0.3 0.05 0 0 40 80 120 160 200 DC operation Ta = 25°C 0.1 0.03 0.2 100 ms* 1 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated linearly with increase in temperature. 0.01 0.1 240 Ambient temperature Ta (°C) 0.3 0.5 1 VCEO max 3 Collector-emitter voltage 3 5 10 30 VCE (V) 2006-11-10 2SC4682 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2006-11-10