TC74VHC4051,4052,4053AF/FT/FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VHC4051AF,TC74VHC4051AFT,TC74VHC4051AFK TC74VHC4052AF,TC74VHC4052AFT,TC74VHC4052AFK TC74VHC4053AF,TC74VHC4053AFT,TC74VHC4053AFK TC74VHC4051AF/AFT/AFK 8-Channel Analog Multiplexer/Demultiplexer TC74VHC4052AF/AFT/AFK Dual 4-Channel Analog Multiplexer/Demultiplexer TC74V4053AF/AFT/AFK Triple 2-Channel Analog Multiplexer/Demultiplexer The TC74VHC4051A/4052A/4053A are high-speed, low-voltage drive analog multiplexer/demultiplexers using silicon gate CMOS technology. In 3 V and 5 V systems these can achieve high-speed operation with the low power dissipation that is a feature of CMOS. The TC74VHC4051A/4052A/4053A offer analog/digital signal selection as well as mixed signals. The 4051A has an 8-channel configuration, the 4052A has an 4-channel × 2 configuration, and the 4053A has a 2-channel × 3 configuration. The switches for each channel are turned ON by the control pin digital signals. All control inputs are equipped with a newly developed input protection circuit that avoids the need for a diode on the plus side (forward side from the input to the VCC). As a result, for example, 5.5 V signals can be permitted on the inputs even when the power supply voltage to the circuits is off. As a result of this input power protection, the TC74VHC4051A/4052A/4053A can be used in a variety of applications, including in the system which has two power supplies, and in battery backup circuits. TC74VHC4051AF, TC74VHC4052AF, TC74VHC4053AF TC74VHC4051AFT, TC74VHC4052AFT, TC74VHC4053AFT TC74VHC4051AFK, TC74VHC4052AFK, TC74VHC4053AFK Features • Low ON resistance: Ron = 45Ω (typ.) (VCC = 3 V) Ron = 24Ω (typ.) (VCC = 4.5 V) • Low power dissipation: ICC = 2.0 μA (max) (Ta = 25°C) • Input level: VIL = 0.8V (max) (VCC = 3 V) VIH = 2.0V (min) (VCC = 3 V) • Power down protection is provided on all control inputs 1 SOP16-P-300-1.27A TSSOP16-P-0044-0.65A VSSOP16-P-0030-0.50 : 0.18 g ( typ.) : 0.06 g ( typ.) : 0.02 g ( typ.) 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Pin Assignment (top view) TC74VHC4051A TC74VHC4052A 4 1 16 VCC 0Y 1 16 VCC 6 2 15 2 2Y 2 15 COM 3 14 1 Y-COM 3 7 4 13 0 3Y 4 13 X-COM 5 5 12 3 1Y 5 12 0X INH 6 11 A INH 6 11 3X GND 7 10 B GND 7 10 A GND 8 9 GND 8 9 C 14 1X B TC74VHC4053A 1Y 1 16 VCC 0Y 2 15 Y-COM 1Z 3 14 X-COM Z-COM 4 13 1X 0Z 5 12 0X INH 6 11 A GND 7 10 B GND 8 9 C Truth Table Control Inputs “ON” Channel Inhibit C* B A VHC4051A VHC4052A VHC4053A L L L L 0 0X, 0Y 0X, 0Y, 0Z L L L H 1 1X, 1Y 1X, 0Y, 0Z L L H L 2 2X, 2Y 0X, 1Y, 0Z L L H H 3 3X, 3Y 1X, 1Y, 0Z L H L L 4 ⎯ 0X, 0Y, 1Z L H L H 5 ⎯ 1X, 0Y, 1Z L H H L 6 ⎯ 0X, 1Y, 1Z L H H H 7 ⎯ 1X, 1Y, 1Z H X X X None None None X: Don't care, *: Except VHC4052AFT 2 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK System Diagram TC74VHC4051A COM 0 1 A 2 3 B 4 5 C 6 OUT INH C IN 7 TC74VHC4052A X-COM OUT C IN 0X 1X A 2X 3X B 0Y 1Y 2Y INH OUT C IN 3Y Y-COM TC74VHC4053A Y-COM X-COM A OUT C IN 0X 1X B 0Y 1Y C 0Z OUT INH 3 C IN 1Z Z-COM 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Absolute Maximum Ratings (Note) Characteristics Symbol Rating Unit Power supply voltage VCC −0.5~7.0 V Control input voltage VIN −0.5~7.0 V Switch I/O voltage VI/O − 0.5~VCC + 0.5 V IIK −20 mA IIOK ±25 mA IT ±25 mA DC VCC or ground current ICC ±50 mA Power dissipation PD 180 mW Storage temperature Tstg −65~150 °C Input diode current I/O diode current Switch through current Note : Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Range (Note) Characteristics Symbol Rating Unit Power supply voltage VCC 2~5.5 V Input voltage VIN 0~5.5 V Switch I/O voltage VI/O 0~VCC V Operating temperature Topr −40~85 °C 0~200 (VCC = 2.5 ± 0.2 V) Input rise and fall time dt/dv 0~100 (VCC = 3.3 ± 0.3 V) ns/V 0~20 (VCC = 5 ± 0.5 V) Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused control inputs must be tied to either VCC or GND. 4 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Electrical Characteristics DC Electrical Characteristics Characteristics High-level Symbol Ta = 25°C Test Condition ON resistance Min Typ. Max Min Max 2.0 1.5 ⎯ ⎯ 1.5 ⎯ 3.0 2.0 ⎯ ⎯ 2.0 ⎯ 4.5 3.15 ⎯ ⎯ 3.15 ⎯ 5.5 3.85 ⎯ ⎯ 3.85 ⎯ 2.0 ⎯ ⎯ 0.5 ⎯ 0.5 3.0 ⎯ ⎯ 0.8 ⎯ 0.8 4.5 ⎯ ⎯ 1.35 ⎯ 1.35 5.5 ⎯ ⎯ 1.65 ⎯ 1.65 VIN = VIL or VIH 2.3 ⎯ 200 ⎯ ⎯ ⎯ VI/O = VCC to GND 3.0 ⎯ 45 86 ⎯ 108 II/O = 2 mA 4.5 ⎯ 24 37 ⎯ 46 VIN = VIL or VIH 2.3 ⎯ 28 73 ⎯ 84 VI/O = VCC or GND 3.0 ⎯ 22 38 ⎯ 44 II/O = 2 mA 4.5 ⎯ 17 27 ⎯ 31 VIN = VIL or VIH 2.3 ⎯ 10 25 ⎯ 35 VI/O = VCC to GND 3.0 ⎯ 5 15 ⎯ 20 II/O = 2 mA 4.5 ⎯ 5 13 ⎯ 18 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA ⎯ ⎯ 2.0 ⎯ 20.0 μA ⎯ VIH Difference of ON resistance between switches ΔRON V Ω Ω VOS = VCC or GND Input/Output leakage current (switch OFF) IOFF Input/Output leakage current (switch ON, output open) II/O Control input current IIN Quiescent supply current ⎯ VIL RON Unit VCC (V) Input voltage Low-level Ta = −40~85°C VIS = GND to VCC VIN = VIL or VIH ICC VOS = VCC or GND VIN = VIL or VIH VIN = VCC or GND VIN = VCC or GND 5.5 5 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK AC Electrical Characteristics (Input: tr = tf = 3 ns) Characteristics Symbol Ta = 25°C Test Condition CL = 15 pF RL = 1 kΩ Phase difference between input and output φI/O CL = 50 pF RL = 1 kΩ CL = 15 pF RL = 1 kΩ Output enable time tpZL tpZH CL = 50 pF RL = 1 kΩ CL = 15 pF RL = 1 kΩ Output disable time CIN Figure 1 CIS Figure 1 All types 4051A COMMON terminal capacitance Figure 1 tpLZ tpHZ CL = 50 pF RL = 1 kΩ Control input capacitance Figure 1 4052A VCC (V) Min Typ. Max Min Max 2.5±0.2 ⎯ 1.2 10 ⎯ 16 3.3±0.3 ⎯ 0.8 6 ⎯ 10 4051A COS 4052A ⎯ 0.3 4 ⎯ 7 ⎯ 2.6 12 ⎯ 18 3.3±0.3 ⎯ 1.5 9 ⎯ 12 5.0±0.5 ⎯ 0.6 6 ⎯ 8 2.5±0.2 ⎯ 3.3 15 ⎯ 20 3.3±0.3 ⎯ 2.3 11 ⎯ 15 5.0±0.5 ⎯ 1.6 7 ⎯ 10 2.5±0.2 ⎯ 4.2 25 ⎯ 32 3.3±0.3 ⎯ 3.0 18 ⎯ 22 5.0±0.5 ⎯ 2.1 12 ⎯ 16 2.5±0.2 ⎯ 6 15 ⎯ 23 3.3±0.3 ⎯ 4.5 11 ⎯ 15 5.0±0.5 ⎯ 3.2 7 ⎯ 10 2.5±0.2 ⎯ 9.6 25 ⎯ 32 3.3±0.3 ⎯ 7.2 18 ⎯ 22 5.0±0.5 ⎯ 5.1 12 ⎯ 16 ⎯ ⎯ 3 ⎯ ⎯ 10 pF ⎯ ⎯ ⎯ pF ⎯ ⎯ ⎯ pF 4052A ⎯ ⎯ ⎯ pF Figure 2 ⎯ ⎯ ⎯ pF ⎯ ⎯ 4052A ⎯ ⎯ 5.6 5.6 0.5 Figure 2 ⎯ ⎯ 0.5 0.5 15 Figure 2 (Note) ⎯ 4053A Note: 13.1 5.7 Figure 2 4051A CPD ns 8.2 4053A Power dissipation capacitance ns 23.4 4051A CIOS ns 5.0±0.5 4053A Feedthrough capacitance Unit 2.5±0.2 4053A SWITCH terminal capacitance Ta = −40~85°C ⎯ 24 12 CPD is defined as the value of the internal equivalent capacitance of IC which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC 6 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Analog Switch Characteristics (Ta = 25°C) (Note) Characteristics Sine Wave Distortion (T.H.D) Test Condition RL = 10 kΩ, CL = 50 pF, fIN = 1 kHz (switch ON) 3.0 0.1 VIN = 4.0 Vp-p 4.5 0.03 4052A Adjust input for 0dBm. Increase fIN frequency until dB meter reads −3dB. RL = 50 Ω, CL = 10 pF,sine wave Figure 3 240 180 (control input to signal output) Crosstalk (between any switches) Note: MHz 230 280 3.0 -45 4.5 -45 3.0 -65 4.5 -65 3.0 60 Figure 5 4.5 100 VIN is centered at (VCC/2). Adjust input for 0dBm. 3.0 -45 4.5 -45 RL = 600 Ω, CL = 50 pF, fIN = 1 MHz, sine wave Figure 4 RL = 50 Ω, CL = 10 pF, fIN = 1 MHz, sine wave Crosstalk 4.5 4053A Adjust input for 0dBm. % 200 4051A 4052A Unit 150 3.0 4053A VIN is centered at (VCC/2). Feed through attenuation (switch OFF) Typ. VIN = 2.0 Vp-p 4051A VIN is centered at (VCC/2). Frequency response VCC (V) RL = 600 Ω, CL = 50 pF, fIN = 1 MHz, square wave (tr = tf = 6 ns) dB mV RL = 600 Ω, CL = 50 pF, fIN = 1 MHz, sine wave Figure 6 dB These characteristics are determined by design of devices. Switch pin Common pin 7 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK AC Test Circuit 3 ns VCC 90% VC C I/O O/I S1 GND 1 kΩ S2 50 pF VCC 50% GND VO/I (S1 = VCC, S2 = GND) 90% 50% tpZH tpHZ VO/I (S1 = GND, S2 = VCC) 50% tpZL 10% VOH VOL VOH VOL tpLZ Figure 1 tpLZ, tpHZ, tpZL, tpZH CIOS VCC VCC COS I/O O/I GND (Common pin) CIS C (Switch pin) Figure 2 CIOS, CIS, COS VCC VCC 1/2VCC O/I GND Figure 3 50 Ω I/O VIN 10 pF C Frequency Response (switch on) VCC C VCC I/O O/I GND Figure 4 8 RL 1/2VCC CL VIN RL from P.G 10% VCC 3 ns Feedthrough 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK VCC C VCC 600 Ω I/O O/I GND VCC/2 Figure 5 50 pF from P.G 600 Ω VCC GND VCC/2 Cross Talk (control input to output signal) VCC C 600 Ω I/O O/I GND 1/2VCC Figure 6 50 pF VCC 50 pF O/I 600 Ω I/O 600 Ω 600 Ω 1/2VCC VCC C VIN 1/2VCC Cross Talk (between any two switches) 9 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Package Dimensions Weight: 0.18 g (typ.) 10 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Package Dimensions Weight: 0.06 g (typ.) 11 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK Package Dimensions Weight: 0.02 g (typ.) 12 2007-10-01 TC74VHC4051,4052,4053AF/FT/FK RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 13 2007-10-01