Anpec APL5309-19A Low iq, low dropout 300ma fixed voltage regulator Datasheet

APL5308/9
Low IQ, Low Dropout 300mA Fixed Voltage Regulator
Features
General Description
•
Low Quiescent Current : 60µA (No load)
•
Low Dropout Voltage : 400mV (@300mA)
The APL5308/9 series are micropower, low dropout linear regulators, which operate from 2.7V to 6V input volt-
•
Fixed Output Voltage : 1.5V ~ 4.5V by Step 0.1V
age and deliver up to 300mA. Typical dropout voltage
is only 400mV at 300mA loading. Designed for use in
Increment
•
battery-powered system, the low 60µA quiescent current makes it an ideal choice. Design with an internal P-
Stable with Aluminum, Tantalum, or Ceramic
Capacitors
channel MOSFET pass transistor, the APL5308/9 maintain
a low supply current, independent of the load current and
•
No Protection Diodes Needed
•
Built-in Thermal Protection
•
Built-in Current-Limit Protection
•
Controlled Short Circuit Current : 50mA
•
Fast Transient Response
specified output current and controlled short-circuit
current. The APL5308/9 regulators come in a minia-
•
Short Setting Time
ture SOT-23-3, SOT-23-5, and SOT-89 packages.
•
SOT-23-3, SOT-23-5, and SOT-89 Packages
•
Lead Free and Green Devices Available
dropout voltage. Other features include thermal-shutdown protection current limit protection to ensure
Pin Configuration
(RoHS Compliant)
Applications
•
5V to 3.3~4.5V Linear Regulators
•
3.3V to 1.5~2.5V Linear Regulators
•
CD-ROM, CD-R/W, and DVD Player
•
Networking System, LAN Card, ADSL/Cable
•
Modem, Cable Set-Top Box
•
PC Peripherals
V IN
GND
3
3
1
2
1
2
GND
V OUT
V OUT
V IN
SOT-23-3 (Top View)
SOT-23-3 (Top View)
APL5308
NC
V OUT
NC
5
1
APL5309
5
4
2
NC
1
3
4
2
3
GND V IN V OUT
V IN GND NC
SOT-23-5 (Top View)
SOT-23-5 (Top View)
APL5309
APL5308
TAB is V IN
TAB is GND
1
2
3
GND
V IN
V OUT
SOT-89 (Top View)
APL5308
1
2
3
V OUT
GND
V IN
SOT-89 (Top View)
APL5309
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
1
www.anpec.com.tw
APL5308/9
Ordering and Marking Information
APL5308/9
Package Code
A : SOT-23-3 B : SOT-23-5 D : SOT-89
Operating Ambient Temperature Range
I : -40 to 85 oC
C : 0 to 70 oC
Handling Code
TR : Tape & Reel
Voltage Code :
15 : 1.5V ~ 45 : 4.5V
Assembly Material
G : Halogen and Lead Free Device
Assembly Material
Handling Code
Temperature Range
Package Code
Voltage Code
APL5308/9 15 D :
APL5308/9
XXXXX - Date Code
XXXXX 15
;
15 - 1.5V
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Marking Information
SOT-23-3 and SOT-23-5 packages
Product Name
APL5308-15A/B
APL5308-16A/B
APL5308-17A/B
APL5308-18A/B
APL5308-19A/B
APL5308-20A/B
APL5308-21A/B
APL5308-22A/B
APL5308-23A/B
APL5308-24A/B
APL5308-25A/B
APL5308-26A/B
APL5308-27A/B
APL5308-28A/B
APL5308-29A/B
APL5308-30A/B
APL5308-31A/B
APL5308-32A/B
APL5308-33A/B
APL5308-34A/B
APL5308-35A/B
APL5308-43A/B
APL5308-45A/B
Marking
389X
38AX
38BX
38CX
38DX
38EX
38FX
38GX
38HX
38IX
38JX
38KX
38LX
38MX
38NX
38OX
38PX
38QX
38RX
38SX
38TX
38UX
38VX
Product Name
APL5309-15A/B
APL5309-16A/B
APL5309-17A/B
APL5309-18A/B
APL5309-19A/B
APL5309-20A/B
APL5309-21A/B
APL5309-22A/B
APL5309-23A/B
APL5309-24A/B
APL5309-25A/B
APL5309-26A/B
APL5309-27A/B
APL5309-28A/B
APL5309-29A/B
APL5309-30A/B
APL5309-31A/B
APL5309-32A/B
APL5309-33A/B
APL5309-34A/B
APL5309-35A/B
APL5309-43A/B
APL5309-45A/B
Marking
399X
39AX
39BX
39CX
39DX
39EX
39FX
39GX
39HX
39IX
39JX
39KX
39LX
39MX
39NX
39OX
39PX
39QX
39RX
39SX
39TX
39UX
39VX
The last character “X” in the marking is for data code.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
2
www.anpec.com.tw
APL5308/9
Absolute Maximum Ratings
Symbol
VIN, VOUT
(Note 1, 2)
Parameter
Input Voltage or Out Voltage
Rating
Unit
6.5
V
Thermal Resistance – Junction to Ambient
RTH,JA
SOT-23-3
SOT-23-5
SOT-89
260
260
180
SOT-23-3
SOT-23-5
SOT-89
130
130
60
°C/W
Thermal Resistance – Junction to Case
RTH,JC
PD
Power Dissipation
TJMAX
Junction Temperature
TSTG
Storage Temperature Range
TL
Lead Temperature, 10 Seconds
°C/W
Internally Limited
W
150
°C
-65 to +150
°C
260
°C
Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating
conditions may affect device reliability.
Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD (max) = (TJ - TA) / θJA;
TJ = 125oC. Exceeding the maximum allowable power dissipation will result in excessive die temperature.
Electrical Characteristics
Unless otherwise noted these specifications apply over full temperature, CIN = 1µF, COUT = 4.7µF, TA= -40 to 85°C. Typical values refer
to TA = 25°C.
APL5308/9
Symbol
VIN
Parameter
Test Conditions
Input Voltage
Unit
Min.
Typ.
Max.
2.7
-
6
V
VOUT -2%
VOUT
VOUT +2%
V
VOUT
Output Voltage
VOUT+1.0V< VCC<6.0V, 0mA< IOUT < IMAX
ILIMIT
Circuit Current Limit
VIN = VOUT+1V
-
650
-
mA
ISHORT
Short Current
VOUT = 0V
-
50
-
mA
IOUT
Load Current
VIN = VOUT+1V
300
-
-
mA
REGLINE Line Regulation
VOUT+1V< VCC<6.0V, IOUT = 1mA
-
1
10
mV
REGLOAD Load Regulation
VIN = VOUT+1V, 0mA< IOUT < IMAX
-
10
25
mV
VIN= VOUT+1V, IOUT = 1mA-300mA in 1µs
-
150
250
mV
1.5V≤VOUT<2.0V
-
1
1.2
2.0V≤VOUT<2.5V
-
0.8
0.9
2.5V≤VOUT<3V
-
0.6
0.7
3V≤VOUT≤ 3.5V
-
0.4
0.5
45
55
-
No load
-
60
100
IOUT = 300mA
-
450
500
Load Transient
VDROP
PSRR
IQ
Dropout Voltage(Note3)
Ripple Rejection
IOUT =300mA
V
F≤1kHz, 1Vpp at VIN = VOUT+1.0V
Quiescent Current
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
3
dB
µA
www.anpec.com.tw
APL5308/9
Electrical Characteristics (Cont.)
Unless otherwise noted these specifications apply over full temperature, CIN = 1µF, COUT = 4.7µF, TA= -40 to 85°C. Typical values refer
to TA = 25°C.
Symbol
OTS
Parameter
APL5308/9
Test Conditions
Over Temperature Shutdown
Unit
Min.
Typ.
Max.
-
150
-
°C
-
30
-
°C
TC
Output Voltage Temperature Coefficient
-
50
-
ppm/°C
TJ
Junction Temperature
0
-
125
°C
Output Capacitor
-
2.2
-
µF
0.01
0.1
1
Ohm
Over Temperature Shutdown Hysteresis
COUT
Hysteresis
ESR
Note 3 : Dropout voltage definition : VIN-VOUT when VOUT is 2% below the value of VOUT for VIN = VOUT+1V.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
4
www.anpec.com.tw
APL5308/9
Typical Operating Characteristics
Quiescent Current vs. Output Current
Quiescent Current vs. Input Voltage
APL5308/9-33
APL5308/9-33
450
450
IOUT=0mA
400
Quiescent Current (µA)
Quiescent Current (µA)
400
350
300
250
200
150
100
50
VIN=5V
350
300
250
200
150
100
50
0
0
0
1
2
3
4
5
6
0
100
200
300
400
500
Input Voltage (V)
Output Current (mA)
Output Voltage vs. Input Voltage
Output Voltage vs. Temperature
APL5308/9-33
3.5
3.31
IOUT=0mA
VOUT=3.3V
3.31
2.5
Output Voltage (V)
Output Voltage (V)
3
VOUT=2.5V
2
VOUT=1.8V
1.5
1
0.5
3.30
3.30
3.29
3.29
3.28
0
3.28
0
1
2
3
4
5
-40
Input Voltage (V)
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
-20
0
20
40
60
80
100 120 140
Temperature (°C )
5
www.anpec.com.tw
APL5308/9
Typical Operating Characteristics (Cont.)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
APL5308/9-2.5
APL5308/9-1.8
1.84
2.55
2.54
1.83
2.53
1.82
Output Voltage (V)
Output Voltage (V)
2.52
2.51
2.50
2.49
2.48
2.47
1.81
1.80
1.79
1.78
2.46
1.77
2.45
-40 -20
0
20
40
60
-40
80 100 120 140
-20
0
Temperature (°C)
20
40
60
80
100 120 140
Temperature (°C)
PSRR vs. Frequency
Dropout Voltage vs. Output Current
APL5308/9-33
700
+0
VIN =5V
IOUT =50mA
-20
500
-30
PSRR (dB)
Dropout Voltage (mV)
-10
VOUT=1.9V
600
400
VOUT=2.5V
300
200
-40
-50
- 60
VOUT=3.3V
100
VOUT=2.8V
- 70
-80
0
0
50
100
150
200
250
20
300
Frequency (HZ)
Output Current (mA)
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
50 100 200 500 1 k 2k 5k 10k 20k 50k 100k 200k
6
www.anpec.com.tw
APL5308/9
Typical Operating Characteristics (Cont.)
Load-Transient Response
Line-Transient Response
APL5308/9-33
Output Voltage (10mV/div)
Output Voltage (100mV/div)
APL5308/9-33
VOUT
VIN=5V
COUT=1µF
IOUT=1mA~300mA
VIN=4.5V~5.5V
COUT=1µF
IOUT=10mA
VOUT
Time (100µs/div)
Time (200µs/div)
Power Dissipation vs. Ambient Temperature
Recommended Minimum Footprint
0.8
0.7
Power Dissipation (W)
0.6
0.5
SOT-89
0.4
0.3
SOT-25
0.2
0.1
0
0
25
50
75
100
125
Ambient Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
7
www.anpec.com.tw
APL5308/9
Pin Description
PIN
I/O
NO.
NAME
1
VIN
2
GND
3
VOUT
I
FUNCTION
Supply voltage input.
Ground pins of the circuitry, and all ground pins must be soldered
To PCB with proper power dissipation.
O
Output pin of the regulator.
Typical Application Circuit
INPUT
2.7V to 6V
VIN
VOUT
VOUT
APL5308/9
CIN
1µ F
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
GND
8
COUT
2.2µ F
www.anpec.com.tw
APL5308/9
Package Information
SOT-23-3
D
e
E
E1
SEE
VIEW A
c
b
0.25
A
L
GAUGE PLANE
SEATING PLANE
0
A1
A2
e1
VIEW A
S
Y
M
B
O
L
SOT-23-3
INCHES
MILLIMETERS
MIN.
MIN.
MAX.
MAX.
0.057
A
1.45
A1
0.00
0.15
0.000
0.006
A2
0.90
1.30
0.035
0.051
b
0.30
0.50
0.012
0.020
c
0.08
0.22
0.003
0.009
D
2.70
3.10
0.106
0.122
E
2.60
3.00
0.102
0.118
E1
1.40
1.80
0.055
0.071
e
0.95 BSC
e1
1.90 BSC
0.037 BSC
0.075 BSC
L
0.30
0.60
0
0°
8°
0.012
0°
0.024
8°
Note : Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
9
www.anpec.com.tw
APL5308/9
Package Information
SOT-23-5
D
e
E
E1
SEE
VIEW A
b
c
0.25
A
L
0
GAUGE PLANE
SEATING PLANE
A1
A2
e1
VIEW A
S
Y
M
B
O
L
SOT-23-5
INCHES
MILLIMETERS
MIN.
MIN.
MAX.
A
MAX.
1.45
0.057
A1
0.00
0.15
0.000
0.006
A2
0.90
1.30
0.035
0.051
b
0.30
0.50
0.012
0.020
c
0.08
0.22
0.003
0.009
D
2.70
3.10
0.106
0.122
E
2.60
3.00
0.102
0.118
E1
1.40
1.80
0.055
0.071
e
0.95 BSC
e1
1.90 BSC
0.037 BSC
0.075 BSC
L
0.30
0.60
0
0°
8°
0.012
0°
0.024
8°
Note : 1. Follow JEDEC TO-178 AA.
2. Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
10
www.anpec.com.tw
APL5308/9
Package Information
SOT-89
A
C
L
H
E
E1
D
D1
e
e1
B
B1
SOT-89
S
Y
M
B
O
L
A
MIN.
MAX.
MIN.
MAX.
1.40
1.60
0.055
0.063
MILLIMETERS
INCHES
B
0.44
0.56
0.017
0.022
B1
0.36
0.48
0.014
0.019
C
0.35
0.44
0.014
0.017
D
4.40
4.60
0.173
0.181
D1
1.62
1.83
0.064
0.072
E
2.29
2.60
0.090
0.102
E1
2.13
2.29
0.084
0.090
e
1.50 BSC
e1
3.00 BSC
0.059 BSC
0.118 BSC
H
3.94
4.25
0.155
0.167
L
0.89
1.20
0.035
0.047
Note : Follow JEDEC TO-243 AA.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
11
www.anpec.com.tw
APL5308/9
Carrier Tape & Reel Dimensions
P0
P2
P1
A
B0
W
F
E1
OD0
K0
A0
A
OD1 B
B
T
SECTION A-A
SECTION B-B
H
A
d
T1
Application
SOT-23-3
Application
SOT-23-5
Application
SOT-89
A
H
T1
C
d
D
W
E1
F
178.0±
2.00
50 MIN.
8.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
8.0±0.30
1.75±0.10
3.5±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
1.0 MIN.
0.6+0.00
-0.40
3.20±0.20
3.10±
0.20
1.50±0.20
4.0±0.10
4.0±0.10
2.0±0.05
1.5+0.10
-0.00
A
H
T1
C
d
D
W
E1
F
178.0±
2.00
50 MIN.
8.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
8.0±0.30
1.75±0.10
3.5±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
1.0 MIN.
0.6+0.00
-0.40
3.20±0.20
3.10±
0.20
1.50±0.20
4.0±0.10
4.0±0.10
2.0±0.05
1.5+0.10
-0.00
A
H
T1
C
d
D
W
E1
F
178.0±
2.00
50 MIN.
12.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
12.0±0.30
1.75±0.10
5.50±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
2.0±0.05
1.5+0.10
-0.00
1.5 MIN.
0.6+0.00
-0.40
4.80±0.20
4.50±
0.20
1.80±0.20
4.0±0.10
8.0±0.10
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
12
www.anpec.com.tw
APL5308/9
Devices Per Unit
Package Type
Unit
Quantity
SOT 23-3
Tape & Reel
3000
SOT 23-5
Tape & Reel
3000
SOT-89
Tape & Reel
1000
Taping Direction Information
SOT-23-3
USER DIRECTION OF FEED
SOT-23-5
USER DIRECTION OF FEED
SOT-89
USER DIRECTION OF FEED
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
13
www.anpec.com.tw
APL5308/9
Reflow Condition
(IR/Convection or VPR Reflow)
tp
TP
Critical Zone
TL to TP
Ramp-up
Temperature
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25°C to Peak
Time
Reliability Test Program
Test item
SOLDERABILITY
HOLT
PCT
TST
ESD
Latch-Up
Method
MIL-STD-883D-2003
MIL-STD-883D-1005.7
JESD-22-B,A102
MIL-STD-883D-1011.9
MIL-STD-883D-3015.7
JESD 78
Description
245°C, 5 sec
1000 Hrs Bias @125°C
168 Hrs, 100%RH, 121°C
-65°C~150°C, 200 Cycles
VHBM > 2KV, VMM > 200V
10ms, 1tr > 100mA
Classification Reflow Profiles
Profile Feature
Average ramp-up rate
(TL to TP)
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
Time maintained above:
- Temperature (TL)
- Time (tL)
Peak/Classification Temperature (Tp)
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
Sn-Pb Eutectic Assembly
Pb-Free Assembly
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
183°C
60-150 seconds
217°C
60-150 seconds
See table 1
See table 2
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max.
6 minutes max.
Time 25°C to Peak Temperature
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
14
8 minutes max.
www.anpec.com.tw
APL5308/9
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process – Package Peak Reflow Temperatures
3
3
Package Thickness
Volume mm
Volume mm
<350
≥350
<2.5 mm
240 +0/-5°C
225 +0/-5°C
≥2.5 mm
225 +0/-5°C
225 +0/-5°C
Table 2. Pb-free Process – Package Classification Reflow Temperatures
3
3
3
Package Thickness
Volume mm
Volume mm
Volume mm
<350
350-2000
>2000
<1.6 mm
260 +0°C*
260 +0°C*
260 +0°C*
1.6 mm – 2.5 mm
260 +0°C*
250 +0°C*
245 +0°C*
≥2.5 mm
250 +0°C*
245 +0°C*
245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright  ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
15
www.anpec.com.tw
Similar pages