DB101S thru DB107S GLASS PASSIVATED REVERSE VOLTAGE - 50 to 1000Volts BRIDEG RECTIFIERS FORWARD CURRENT - 1.0 Amperes DBS FEATURES ●Rating to 1000V PRV .047(1.2) .037(0.95) ●Ideal for printed circuit board .335(8.5) .307(7.8) ●Low forward voltage drop,high current capability - ●Reliable low cost construction utilizing molded plastic + technique results in inexpensive product .256(6.5) .244(6.2) ●Lead tin Pb/Sn copper ~ ~ ●The plastic material has UL flammability classification 94V-0 .406(10.3) .391(10.0) .140(0.35) .008(0.2) .346(8.8) .323(8.2) MECHANICAL DATA .134(3.4) .124(3.15) .063(1.6) .055(1.4) ●Polarit:As marked on Body .205(5.2) .197(5.0) ●Weight:0.02 ounces,0.38 gras ●Mounting position:Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward I(AV) 1.0 A IFSM 50 A VF 1.1 V IR 10 500 uA I2t Rating for Fusing (t<8.3ms) I2t 10.4 A2s Typical Junction Capacitance Per Element (Note1) CJ 25 pF RθJC 40 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Rectified Current @TA=40℃ Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current @TJ=25℃ at Rated DC Bolcking Voltage @TJ=125℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient mounted on P.C.B. with 0.5*0.5"(13*13mm) copper pads. ~ 223 ~ RATING AND CHARACTERISTIC CURVES DB101S thru DB107S FIG.2-MXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 1.0 0.8 0.6 0.4 0.2 MOUNTED ON PC BOARD SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.1 100 50 150 50 40 30 20 SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 AMBIENT TEMPERATURE, ° C 10 20 50 100 NUMBER OFCYCLES AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 10 INSTANTANEOUS FORWARD CURRENT, (A) 100 10 T J=25℃,f=1MHZ 1.0 T J = 25°C 0.1 PULSE WIDTH 300us 2% DUTY CYCLE 1.0 0.1 1.0 4.0 10.0 0.01 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 REVERSE VOLTAGE,(VOLTS) INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT,(µA) CAPACITANCE(pF) 5 T J=125℃ 10 1.0 T J=25℃ 0.1 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 224 ~ 140 1.8