Vishay CSC08A011FPA Thick film resistor networks, single-in-line, conformal coated sip Datasheet

CSC
www.vishay.com
Vishay Dale
Thick Film Resistor Networks, Single-In-Line,
Conformal Coated SIP
FEATURES
• Isolated, bussed and
schematics available
dual
terminator
• Body height: “A” profile = 0.195" (4.95 mm) and
“B” profile = 0.295" (7.50 mm) standard; custom
“C” profile = 0.350" (8.89 mm) also available
• “A” profile standard in 4 thru 12 pins
Available
• Thick film resistive elements
• Reduces total assembly costs
• Resistor elements protected by tough epoxy conformal
coating
• Wide resistance range (10  to 2.2 M)
• Available in bulk pack as standard; optional tube pack is
also available
• Meets EIA/ECA-CB23 rev. G whisker test requirements for
class 1A products
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
TEMP.
TEMPERATURE
MAX.
GLOBAL
POWER RATING RESISTANCE
COEFFICIENT
(2)
COEFFICIENT
TOLERANCE
WORKING
PACKAGE
MODEL/
ELEMENT (1)
TRACKING (1)
RANGE
(- 55 °C to + 125 °C)
VOLTAGE (3)
HEIGHT
±%
SCHEMATIC
P70 °C W

(- 55 °C to + 125 °C)
± ppm/°C
VDC
± ppm/°C
A
0.20
CSCxxx01
B
A
0.25
0.30
CSCxxx03
B
A
0.40
0.20
CSCxxx05
B
0.25
10 to 50
250
50.1 to 2.2M
100
10 to 50
250
50.1 to 2.2M
100
10 to 50
250
50.1 to 2.2M
100
10 to 50
250
50.1 to 2.2M
100
10 to 50
250
50.1 to 2.2M
100
10 to 50
250
50.1 to 2.2M
100
1, 2, 5
50
100
1, 2, 5
50
100
1, 2, 5
150
100
Notes
• See derating curves for package power rating
(1) For resistor power ratings at + 25 °C see derating curves
(2) ± 2 % standard, ± 1 % and ± 5 % available
(3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less
Revision: 03-May-13
Document Number: 31509
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSC
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSC08A03100RGEK (preferred part number format)
C
S
GLOBAL
MODEL
CSC
C
0
A
PACKAGE
HEIGHT
PIN COUNT
04 to 12 pin
available
04 = 4 pin
08 = 8 pin
12 = 12 pin
8
0
3
SCHEMATIC
A = “A” profile
B = “B” profile
01 = Bussed
03 = Isolated
00 = Special
1
0
0
R
RESISTANCE
VALUE
TOLERANCE
CODE
R=
K = k
M = M
10R0 = 10 
680K = 680 k
1M00 = 1.0 M
0000 = 0 
Jumper
F=±1%
G=±2%
J=±5%
S = Special
Z=0
Jumper
E
G
K
PACKAGING
SPECIAL
EK = Lead (Pb)-free, bulk
PA = Tin/lead, bulk
Blank = Standard
(dash number)
(up to 3 digits)
From 1 to 999
as applicable
Historical Part Number example: CSC08A03101GEK (will continue to be accepted)
CSC
08
A
03
101
G
EK
HISTORICAL
MODEL
PIN COUNT
PACKAGE
HEIGHT
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CODE
PACKAGING
New Global Part Numbering: CSC08A05131AGEK (preferred part number format)
C
GLOBAL
MODEL
CSC
S
C
0
A
0
5
PACKAGE
HEIGHT
SCHEMATIC
A = “A” profile
B = “B” profile
05 = Dual
terminator
PIN COUNT
04 to 12 pin
available
04 = 4 pin
08 = 8 pin
12 = 12 pin
8
1
3
1
A
RESISTANCE
VALUE
TOLERANCE
CODE
3 digit
impedance
code, followed
by alpha
modifier (see
impedance
table)
F=±1%
G=±2%
J=±5%
G
E
K
PACKAGING
SPECIAL
EK = Lead (Pb)-free, bulk
PA = Tin/lead, bulk
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
Historical Part Number example: CSC08A05131AGEK (will continue to be accepted)
CSC
08
A
05
221
331
G
EK
HISTORICAL
MODEL
PIN COUNT
PACKAGE
HEIGHT
SCHEMATIC
RESISTANCE
VALUE 1
RESISTANCE
VALUE 2
TOLERANCE
CODE
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CSC SERIES
Voltage coefficient of resistance
Veff
< 50 ppm typical
Dielectric strength
VAC
200
Isolation resistance (03 schematic)

> 100M
Operating temperature range
°C
- 55 to + 125
A
Max.
0.098 (2.49) Max.
DIMENSIONS in inches (millimeters)
C
Max.
0.130 ± 0.010
(3.30 ± 0.254)
Pin
#1
0.032
(0.813)
0.050 (1.27) Max.
0.100 ± 0.010 (2.54 ± 0.254)
Non-Accumulative
Revision: 03-May-13
0.018 ± 0.003
(0.457 ± 0.076)
0.045
(1.14)
0.012 ± 0.003
(0.305 ± 0.076)
(Leads are along
centerline of body)
B
Document Number: 31509
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSC
www.vishay.com
Vishay Dale
01 SCHEMATIC
1
GLOBAL
MODEL
2
3
n-1
CSC04
CSC05
CSC06
CSC07
CSC08
CSC09
CSC10
CSC11
CSC12
n
03 SCHEMATIC
1
2
GLOBAL
MODEL
3
4
n-1
CSC04
CSC06
CSC08
CSC10
CSC12
n
05 SCHEMATIC
GLOBAL
MODEL
R2
R1
1
2
3
n-1
n
CSC04
CSC05
CSC06
CSC07
CSC08
CSC09
CSC10
CSC11
CSC12
NUMBER OF
RESISTORS
A
(MAX.)
B
C
(MAX.)
3
4
5
6
7
8
9
10
11
0.390 (9.91)
0.490 (12.45)
0.590 (14.99)
0.690 (17.53)
0.790 (20.07)
0.890 (22.61)
0.990 (25.15)
1.09 (27.69)
1.19 (30.23)
0.300 (7.62)
0.400 (10.16)
0.500 (12.70)
0.600 (15.24)
0.700 (17.78)
0.800 (20.32)
0.900 (22.86)
1.00 (25.40)
1.100 (27.94)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
NUMBER OF
RESISTORS
A
(MAX.)
B
C
(MAX.)
2
3
4
5
6
0.390 (9.91)
0.590 (14.99)
0.790 (20.07)
0.990 (25.15)
1.19 (30.23)
0.300 (7.62)
0.500 (12.70)
0.700 (17.78)
0.900 (22.86)
1.100 (27.94)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
NUMBER OF
RESISTORS
A
(MAX.)
B
C
(MAX.)
4
6
8
10
12
14
16
18
20
0.390 (9.91)
0.490 (12.45)
0.590 (14.99)
0.690 (17.53)
0.790 (20.07)
0.890 (22.61)
0.990 (25.15)
1.09 (27.69)
1.19 (30.23)
0.300 (7.62)
0.400 (10.16)
0.500 (12.70)
0.600 (15.24)
0.700 (17.78)
0.800 (20.32)
0.900 (22.86)
1.00 (25.40)
1.100 (27.94)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
MECHANICAL SPECIFICATIONS
STOCKED RESISTANCE VALUES IN 
(“G” TOLERANCE)
Marking resistance
to solvents
Permanency testing per
MIL-STD-202, method 215
Standard E-24 resistance values stocked. Consult factory.
Per MIL-STD-202, method 208E,
RMA flux
Many dual terminator resistance values stocked. Consult
factory.
Solderability
Body
High alumina, epoxy coated
Terminals (1)
Solder plated leads
Note
(1) Coating meniscus meets class 2 requirements of IPC-A-610.
IMPEDANCE CODES
CODE
R1 ()
R2 ()
CODE
R1 ()
R2 ()
500B
82
130
141A
270
270
750B
120
200
181A
330
390
800C
130
210
191A
330
470
990A
160
260
221B
330
680
101C
180
240
281B
560
560
111C
180
270
381B
560
1.2K
121B
180
390
501C
620
2.7K
121C
220
270
102A
1.5K
3.3K
131A
220
330
202B
3K
6.2K
Note
• For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530).
Revision: 03-May-13
Document Number: 31509
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSC
www.vishay.com
Vishay Dale
Power Rating (W)
”A“ Profile
“A” PROFILE + 70 °C PACKAGE RATINGS
CSC10A Package
1.90
CSC08A Package
1.50
CSC06A Package
1.15
Single Resistor
03 Schematic
0.45
0.30
01 and 05 Schematics
- 50
+ 25
+ 70
+ 125 + 150
Power Rating (W)
CSC09A
1.12 W
CSC08A
1.00 W
CSC07A
0.87 W
CSC06A
0.75 W
CSC05A
0.62 W
CSC04A
0.40 W
CSC12B
1.90 W
CSC10B
1.60 W
CSC08B Package
CSC09B
1.45 W
CSC08B
1.30 W
CSC07B
1.15 W
CSC06B
1.00 W
CSC05B
0.80 W
CSC04B
0.60 W
03 Schematic
01 and 05 Schematics
- 50
Revision: 03-May-13
1.25 W
1.75 W
0.60
Derating
CSC10A
CSC11B
Single Resistor
0.38
1.37 W
CSC10B Package
CSC06B Package
1.50
CSC11A
“B” PROFILE + 70 °C PACKAGE RATINGS
”B“ Profile
2.00
1.5 W
Ambient Temperature °C
Derating
2.50
CSC12A
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Document Number: 31509
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSC
www.vishay.com
Vishay Dale
CIRCUIT APPLICATIONS
01 Schematic
Bussed
The CSCxxx01 single-in-line resistor networks provide the user with
nominally equal resistors, each connected to a common pin (pin no. 1).
Commonly used in the following applications:
• “Wired OR” pull-up
• Power gate pull-up
• MOS/ROM pull-up/pull-down
1
2
3
n-1
n
• Open collector pull-up
• TTL input pull-down
• TTL unused gate pull-up
* “A” profile standard, “B” profile available.
03 Schematic
Isolated
The CSCxxx03 single-in-line resistor networks provide the user with
nominally equal resistors. Each resistor is isolated from all others.
Commonly used in the following applications:
1
2
3
4
n-1
•
•
•
•
n
“Wired OR” pull-up
Power driven pull-up
Power gate pull-up
Line termination
• Long-line impedance balancing
• LED current limiting
• ECL output pull-down
• TTL input pull-down
* “A” Profile standard, “B” profile available.
05 Schematic
Dual Terminator
The CSCxxx05 circuits contain series pairs of resistors. Each series
pair is connected between two common lines. The junction of these
resistor pairs is connected to the input terminals. The 05 circuits are
designed for TTL dual-line termination and pulse squaring.
R2
R1
* “A” profile standard, “B” profile available.
1
2
3
n-1
n
PERFORMANCE
CONDITIONS
MAX. R (TYPICAL TEST LOTS)
5 cycles between - 65 °C and + 125 °C
± 0.50 % R
2.5 x rated working voltage, 5 s
± 0.25 % R
45 min at full rated working voltage at - 65 °C
± 0.25 % R
240 h with humidity ranging from 80 % RH to 98 % RH
± 1.00 % R
Leads immersed in + 350 °C solder to within 1/16" of body for 3 s
± 0.25 % R
Total of 18 shocks at 100 g's
± 0.25 % R
Vibration
12 h at maximum of 20 g's between 10 Hz and 2000 Hz
± 0.25 % R
Load life
1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full
1000 h period. Derated according to the curve.
± 1.00 % R
Terminal strength
4.5 pound pull for 30 s
± 0.25 % R
Insulation resistance
10 000 M (minimum)
-
No evidence of arcing or damage (200 VRMS for 1 min)
-
TEST
Thermal shock
Short time overload
Low temperature operation
Moisture resistance
Resistance to soldering heat
Shock
Dielectric withstanding voltage
Revision: 03-May-13
Document Number: 31509
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages