Ecliptek EC2010DRTS-24000M-G Oscillator Datasheet

Marketing Bulletin
DATE:
December 27th, 2006
TO:
All Sales Personnel
FROM:
Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective December 27th, 2006:
Series
EC20
Description
3.3V 14 pin DIP Oscillator
Recommended Replacement
EB52F3 or EB52F5
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after March 31st, 2007, with
delivery to conclude by June 30th 2007.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Vice President of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EC20 Series
EC20
• RoHS Compliant (Pb-free)
• HCMOS output
• 3.3V supply voltage
• 14 pin DIP package
• Stability to ±5ppm
• Custom lead length,
gull wing options available
H 8.0
L 20.8
W 13.2
OSCILLATOR
OBSOLETE
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
1.000MHz to 50.000MHz
Operating Temperature Range
Per Table 1
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
3.3VDC ±10%
Input Current
Frequency Tolerance / Stability
1.000MHz to 20.000MHz
10mA Maximum
20.001MHz to 50.000MHz
20mA Maximum
vs. Operating Temperature Range
Per Table 1
vs. Input Voltage ( VDD ±5%)
±2.0ppm Maximum
vs. Load (±2pF)
±1.0ppm Maximum
±5ppm Minimum
Internal Trim (Top of Can)
Output Voltage Logic High (VOH)
w/HCMOS Load
2.7VDC Minimum
IOH = -8mA
Output Voltage Logic Low (VOL)
w/HCMOS Load
0.5VDC Maximum
IOL = +8mA
Rise Time / Fall Time
10% to 90% of Waveform < 20.000MHz
10 nSeconds Maximum
10% to 90% of Waveform > 20.000MHz
6 nSeconds Maximum
at 50% of Waveform
50 ±10(%) (Standard) or 50 ±5(%) (Optional)
Duty Cycle
15pF HCMOS Load
Load Drive Capability
Tri-State Input Voltage
VIH: No Connection
Enables Output
VIH: ≥2.2VDC
Enables Output
VIL: ≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±1ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC20
14 pin DIP
3.3V
OS61
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC20 07 A R T TS - 24.000M - CL125
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Full Size Gull Wing (See Page 132)
FREQUENCY STABILITY
2 Digit Code Per Table 1
OPERATING TEMPERATURE RANGE
1 Letter Code Per Table 1
INTERNAL TRIM OPTIONS
Blank=No Internal Trim
R=±5ppm Minimum (Top of Can)
DUTY CYCLE
Blank=50 ±10(%) (Standard)
T=50 ±5(%)
FREQUENCY
OBSOLETE
OUTPUT CONTROL FUNCTION
TS=Tri-State Enable High
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
Pin 1: Tri-State
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
Line 1: ECLIPTEK
Line 2: EC20 TS
Output Control Function
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
TS = Tri-State Enable High
Series Designator
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC20
14 pin DIP
3.3V
OS61
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages