Panasonic AXE514124 The 2.5 mm wide ultra-slim body contributes to further contributes to further enhancement of target equipment. Datasheet

AXE5, 6
Narrow-pitch connectors
The 2.5 mm wide ultra-slim body
contributes to further
miniaturization and functionality
enhancement of target equipment.
NARROW PITCH (0.4 mm)
CONNECTORS For Board-to-FPC
ADVANCED SERIES A4S
FEATURES
Socket
Header
1. 2.5 mm wide ultra-slim two-piece
connectors
The ultra-compact and slim body
contributes to further miniaturization and
functionality enhancement of target
equipment.
<Compared with our existing model
(F4S, 40 contacts, when mated)>
• Width: 30% down
• Footprint: 30% down
F4S
Compliance with RoHS Directive
1.0
A4S
4. Mated heights of 0.8 and 1.0 mm are
available for the same foot pattern.
5. Connectors for inspection available
(See page 31 for details of the structure)
APPLICATIONS
Recommended for board-to-FPC
connections of mobile equipment,
such as cellular phones, smart
phones, notebook PCs, and portable
music players
0.8
2.5
3.6
2. “
”
structure adopted to ensure high
resistance to various environments in
spite of the ultra-slim and low profile
body
3. The simple lock structure for good
mating/unmating operation feel.
Simple lock structure
Double contact
Simple lock
V-notch
The connector gives the tactile feedback
when inserted, allowing reliable mating.
ORDERING INFORMATION
AXE
1
2
4
5: Narrow Pitch Connector A4S (0.4 mm pitch) Socket
6: Narrow Pitch Connector A4S (0.4 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 0.8/1.0 mm
<Header>
1: For mated height 0.8 mm
2: For mated height 1.0 mm
Functions
2: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
4: Ni plating on base, Au plating on surface (for Ni barrier available)
<Header>
4: Ni plating on base, Au plating on surface
panasonic-electric-works.net/ac
PRODUCT TYPES
Mated height
0.8mm
1.0mm
Number of contacts
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
44
50
54
60
64
70
80
10
14
20
24
30
40
50
54
60
70
80
Part number
Socket
AXE510124
AXE512124
AXE514124
AXE516124
AXE518124
AXE520124
AXE522124
AXE524124
AXE526124
AXE528124
AXE530124
AXE532124
AXE534124
AXE536124
AXE538124
AXE540124
AXE544124
AXE550124
AXE554124
AXE560124
AXE564124
AXE570124
AXE580124
AXE510124
AXE514124
AXE520124
AXE524124
AXE530124
AXE540124
AXE550124
AXE554124
AXE560124
AXE570124
AXE580124
Packing
Header
AXE610124
AXE612124
AXE614124
AXE616124
AXE618124
AXE620124
AXE622124
AXE624124
AXE626124
AXE628124
AXE630124
AXE632124
AXE634124
AXE636124
AXE638124
AXE640124
AXE644124
AXE650124
AXE654124
AXE660124
AXE664124
AXE670124
AXE680124
AXE610224
AXE614224
AXE620224
AXE624224
AXE630224
AXE640224
AXE650224
AXE654224
AXE660224
AXE670224
AXE680224
Inner carton (1-reel)
Outer carton
5,000 pieces
10,000 pieces
Notes: 1. Order unit:
For mass production: in 1-inner carton (1-reel) units
Samples for mounting check: in 50-connector units. Please contact our sales office.
Samples: Small lot orders are possible. Please contact our sales office.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
3. Please contact us for connectors having a number of contacts other than those listed above.
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXE5, 6
Narrow-pitch connectors
AXE5, 6
SPECIFICATIONS
Characteristics
Electrical
characteristics
Mechanical
characteristics
Item
Rated current
Rated voltage
Specifications
0.3A/contact (Max. 5 A at total contacts)
60V AC/DC
Breakdown voltage
150V AC for 1 min.
Insulation resistance
Min. 1,000MΩ (initial)
Contact resistance
Max. 90mΩ
Composite insertion force
Composite removal force
Contact holding force
(Socket contact)
Ambient temperature
Max. 1.200N/contacts × contacts (initial)
Min. 0.165N/contacts × contacts
Soldering heat resistance
Storage temperature
Environmental
characteristics
Thermal shock resistance
(header and socket mated)
Lifetime
characteristics
Unit weight
Based on the contact resistance measurement method
specified by JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures. No dew condensation.
–55°C to +85°C
Peak temperature: 260°C or less (on the surface of
the PC board around the connector terminals)
300°C within 5 sec. 350°C within 3 sec.
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Insertion and removal life
30 times
Infrared reflow soldering
Soldering iron
No freezing at low temperatures. No dew condensation.
Sequence
1. –55 −30 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85 +30 °C, 30 minutes
4. ~ , Max. 5 minutes
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
H2S resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Using 250V DC megger (applied for 1 min.)
Min. 0.20N/contacts
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
48 hours,
contact resistance max. 90mΩ
Humidity resistance
(header and socket mated)
Conditions
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200 times/
hours
20-contact type: Socket: 0.02 g Header: 0.01 g
Material and surface treatment
Part name
Molded
portion
Contact and
Post
Material
LCP resin
(UL94V-0)
Copper alloy
Surface treatment
—
Contact portion: Base: Ni plating Surface: Au plating
Terminal portion: Base: Ni plating Surface: Au plating (except the terminal tips)
The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).
Metal clips: Sockets: Base: Ni plating Surface: Pd+Au flash plating (except the terminal tips)
Headers: Base: Ni plating Surface: Au plating (except the terminal tips)
panasonic-electric-works.net/ac
DIMENSIONS (Unit: mm)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://panasonic-electric-works.net/ac
Dimension table (mm)
Terminal coplanarity
A
B±0.1
0.40±0.05
0.15±0.03
0.77
0.08
1.72
2.50
(Contact and clips
(soldering terminal))
(0.39)
2.20
CAD Data
0.70 (Suction face)
Socket (Mated height: 0.8 mm/1.0 mm)
(0.90)
Z note
0.30±0.03
C±0.1
1.06
2.50
Y note
General tolerance: ±0.2
Note: Since the clip (soldering terminal) has a single-piece construction,
sections Y and Z are electrically connected.
Header (Mated height: 0.8 mm)
4.5
1.6
3.4
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
44
50
54
60
64
70
80
4.9
5.3
5.7
6.1
6.5
6.9
7.3
7.7
8.1
8.5
8.9
9.3
9.7
10.1
10.5
11.3
12.5
13.3
14.5
15.3
16.5
18.5
2.0
2.4
2.8
3.2
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.4
9.6
10.4
11.6
12.4
13.6
15.6
3.8
4.2
4.6
5.0
5.4
5.8
6.2
6.6
7.0
7.4
7.8
8.2
8.6
9.0
9.4
10.2
11.4
12.2
13.4
14.2
15.4
17.4
A
B
C
Dimension table (mm)
CAD Data
Terminal coplanarity
A
B±0.1
0.40±0.05
0.15±0.03
0.65
0.08
2.00
(Post and clips
(soldering terminal))
0.15±0.03
C±0.1
(0.31)
Clips (Soldering terminals)
1.28
0.84
1.46
Clips (Soldering terminals)
(0.36)
1.42
0.70 (Suction face)
Number of contacts/
dimension
10
General tolerance: ±0.2
Number of contacts/
dimension
10
A
B
C
3.8
1.6
3.2
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
44
50
54
60
64
70
80
4.2
4.6
5.0
5.4
5.8
6.2
6.6
7.0
7.4
7.8
8.2
8.6
9.0
9.4
9.8
10.6
11.8
12.6
13.8
14.6
15.8
17.8
2.0
2.4
2.8
3.2
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.4
9.6
10.4
11.6
12.4
13.6
15.6
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.0
8.4
8.8
9.2
10.0
11.2
12.0
13.2
14.0
15.2
17.2
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXE5, 6
0.70 (Suction face)
Header (Mated height: 1.0 mm)
Terminal coplanarity
A
B±0.1
0.40±0.05
0.15±0.03
0.85
0.08
(Post and clips
(soldering terminal))
2.00
1.28
(0.36)
1.42
0.15±0.03
C±0.1
Dimension table (mm)
Number of contacts/
dimension
10
3.8
1.6
3.2
14
20
24
30
40
50
54
60
70
80
4.6
5.8
6.6
7.8
9.8
11.8
12.6
13.8
15.8
17.8
2.4
3.6
4.4
5.6
7.6
9.6
10.4
11.6
13.6
15.6
4.0
5.2
6.0
7.2
9.2
11.2
12.0
13.2
15.2
17.2
0.84
1.46
Clips (Soldering terminals)
(0.31)
Clips (Soldering terminals)
General tolerance: ±0.2
A
B
C
Header
Header
Socket
1.00±0.1
0.80±0.1
Socket and Header are mated
Socket
EMBOSSED TAPE DIMENSIONS (Unit: mm) (Common for respective contact types, sockets and headers)
Specifications for taping
(In accordance with JIS C 0806-1990. However, not applied to
the mounting-hole pitch of some connectors.)
(A±0.3)
(B)
Top cover tape
Embossed carrier tape
(2.0)
(4.0)
(C)
(1.75)
(2.0)
(C)
(1.75)
(D±1)
380 dia.
Tape II
(A±0.3)
Specifications for the plastic reel
(In accordance with EIAJ ET-7200B.)
(4.0)
Tape I
Embossed mounting-hole
8.0
8.0
Taping reel
.1
+0 0
5
1.
.1
+0 0
5
1.
Leading direction after packaging
Narrow-pitch connectors
AXE5, 6
a.
di
a.
di
Dimension table (Unit: mm)
Type/Mated height
Number of contacts
Type of taping
A
B
C
D
Quantity per reel
Common for sockets
and headers
0.8 mm/1.0 mm
24 or less
26 to 70
80
Tape I
Tape I
Tape II
16.0
24.0
32.0
—
—
28.4
7.5
11.5
14.2
17.4
25.4
33.4
5,000
5,000
5,000
Connector orientation with respect to embossed tape feeding direction
Type
Common for A4S
Direction
of tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
panasonic-electric-works.net/ac
CONNECTOR FOR INSPECTION NARROW PITCH CONNECTORS
USAGE APPLICATIONS WITH
ADVANCED SERIES A4S
3,000 INSERTION AND
REMOVAL TIMES
(0.4 mm PITCHES) FOR INSPECTION USAGE
Socket
Header
Compliance with RoHS Directive
FEATURES
APPLICATIONS
1. 3,000 insertion and removals (when
as recommended)
2. Same external dimensions and foot
pattern as standard type.
3. Improved mating
Insertion and removal have become
easier due to a reduction in the mating
retention force required by the simple
locking structure and also in the amount
of force needed for insertion and
removal. (We cannot warrant anything
regarding mating retention.)
Ideal for module unit inspection and
equipment assembly inspection
TABLE OF PRODUT TYPES
✩: Available for sale
Product name
A4S
for inspection
10
✩
12
✩
14
✩
16
✩
18
✩
20
✩
22
✩
24
✩
26
✩
28
✩
Number of contacts
30
32
34
36
✩
✩
✩
✩
38
✩
40
✩
44
✩
50
✩
54
✩
60
✩
64
✩
70
✩
80
✩
Notes: 1. Please inquire about numbers of contacts other than those given above.
2. Please inquire with us regarding delivery times.
3. Please keep the minimum unit for ordering no less than 50 pieces per lot.
4. Please inquire for further information.
PRODUCT TYPES
Socket
Specifications
Without positioning bosses
Part No.
AXE5E∗∗26
Specifications
Without positioning bosses
Header
Part No.
AXE6E∗∗26
Note: When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector.
NOTES
(0.65)
0.40±0.03
0.23±0.03
1.10±0.03
2.40±0.03
1.66±0.03
0.60±0.03
(0.53)
0.40±0.03
0.23±0.03
(0.50)
Recommended PC board pattern (TOP VIEW)
0.20±0.03
1.90±0.03
• Header (Mated height: 0.8mm/1.0mm)
Recommended PC board pattern (TOP VIEW)
2.90±0.03
1.06±0.03
(0.92)
• Socket (Mated height: 0.8mm/1.0mm)
C
30
0.90±0.03
1.45±0.03
0.
0.45±0.03
0.80±0.03
: Insulation area
1.26±0.01
2.30±0.01
C
0.
30
0.90±0.01
1.45±0.01
0.40±0.01
0.20±0.01
(0.52)
0.40±0.01
0.20±0.01
1.66±0.01
0.60±0.01
(0.53)
Metal mask thickness: When 120µm
(Terminal opening ratio: 70%)
(Metal-part opening ratio: 100%)
(0.40)
Recommended metal mask opening pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 70%)
(Metal-part opening ratio: 100%)
2.00±0.01
2.80±0.01
Recommended metal mask opening pattern
2.90±0.01
1.06±0.01
(0.92)
If extra resistance to drop impact is
required for ultra-low profile type
connectors, we recommend using our
F4 or F4S series.
Recommended PC board and metal
mask patterns
Appropriate control of solder amount is
required to minimize solder bridges and
other defects for connectors with 0.4-mm
or 0.5-mm pitch terminals, which require
high-density mounting. Refer to the righthand drawing for recommended patterns.
0.45±0.01
0.80±0.01
For other details, please verify with
the product specification sheets.
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXE5, 6
Similar pages