BY APPD DATE DESCRIPTION C REVISED & REDRAWN PER ER7306 CWB REV CWB 04/14/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL SPECIFICATIONS: BODY: BRASS PER ASTM B16 CAP: TEFLON PER ASTM D1710 2. FINISH SPECIFICATIONS: BODY: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN. NICKEL PER AMS-QQN-290 (RoHS) 3. PARTS ARE SUPPLIED USING TAPE & REEL PACKAGING. (13" REELS) .24 6.10 .218 5.54 .040 1.02 .015 .38 .250 6.35 4X .078 1.98 CATALOG P/N: 01333 .22 5.6 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 4:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING RECCOMENDED PC BOARD LAYOUT SCALE 4:1 DRAWN KJT APPROVED JEM DATE APPROVED 01/31/02 JWH DATE APPROVED 02/01/02 JED DATE 02/01/02 DATE 02/01/02 POWER SNAP SURFACE MOUNT 40 AMP A SD01333 SHT 1 OF 1 REV C