Sanyo DZB18C 1.0w zener diode Datasheet

Ordering number :EN653F
DZB6.2 to DZB30
Sillicon Diffused Junction Type
1.0W Zener Diodes
Features
Package Dimensions
· Plastic molded structure.
· Voltage regulator use.
· Power dissipation:P=1.0W.
· Zener voltage:VZ=6.2 to 30V
unit:mm
1083
[DZB6.2 to DZB30]
C:Cathode
A:Anode
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Power Dissipation
P
1.0
W
Junction Temperature
Tj
150
˚C
Storage Temperature
Tstg
–40 to +150
˚C
Electrical Characteristics at Ta = 25˚C
Type No.
Zener Characteristics
Forward Voltage Drop
Zener Voltage
VZ
Dynamic
Resistance
[V]
[Ω]
Measured
Reverse Current
Measured
Measured
Current
VF
Current
IR
Voltage
IZ
[V]
[A]
[µA]
[V]
[mA]
max
max
typ
min
max
max
DZB6.2U
6.2
5.60
6.80
60
–10
2
0.2
–10
–2.0
6.8C
6.8
6.45
7.14
60
–10
2
0.2
–10
–3.0
7.5C
7.5
7.13
7.81
30
–10
2
0.2
–10
–4.5
8.2C
8.2
7.79
8.61
30
–10
2
0.2
–10
–4.9
9.1C
9.1
8.65
9.55
30
–10
2
0.2
–10
–5.5
10C
10
9.50
10.50
30
–10
2
0.2
–10
–6.0
11C
11
10.50
11.50
30
–10
2
0.2
–10
–7.0
12C
12
11.40
12.60
30
–10
2
0.2
–10
–8.0
13C
13
12.40
13.60
30
–10
2
0.2
–10
–9.0
15C
15
14.30
15.80
30
–10
2
0.2
–10
–10.0
16C
16
15.20
16.80
30
–10
2
0.2
–10
–11.0
18C
18
17.10
18.90
30
–10
2
0.2
–10
–13.0
20C
20
19.00
21.00
30
–10
2
0.2
–10
–14.0
22C
22
20.90
23.10
30
–10
2
0.2
–10
–16.0
24C
24
22.80
25.20
30
–10
2
0.2
–10
–17.0
27C
27
25.70
28.30
30
–10
2
0.2
–10
–19.0
30C
30
28.50
31.50
30
–10
2
0.2
–10
–21.0
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
33098HA (KT)/13196GI/2089TA/1199MO/9205KI, TS No.653-1/2
DZB6.2 to 30
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and
the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates,
subsidiaries and distributors and all their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees
are made or implied regarding its use or any infringements of intellectual property rights or other rights of
third parties.
This catalog provides information as of March, 1998. Specifications and information herein are subject to
change without notice.
PS No.653-2/2
Similar pages