VISHAY GL24T

GL05T to GL24T
VISHAY
Vishay Semiconductors
Low Capacitance ESD Protection Diodes for High-Speed Data
Interfaces
Features
3
• Transient protection for data lines as per
IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact)
IEC 61000-4-5 (Lightning) see IPPM below
• Small package for use in portable electronics
1
2
17416
Mechanical Data
• High temperature soldering guaranteed:
260 °C/ 10 sec. at terminals
• Low capacitance for high speed data lines,
cellular handsets, USB port protection,
LAN equipment, peripherals
Case: SOT-23 Plastic Package
Molding Compound Flammability Rating:
UL 94 V-0
Terminals: High temperature soldering guaranteed:
260 °C/10 sec. at terminals
Weight: 8 mg
Absolute Maximum Ratings
Ratings at 25 °C, ambient temperature unless otherwise specified
Symbol
Value
Unit
Peak pulse power
Parameter
8/20 µs waveform
Test condition
PPK
300
W
ESD voltage
ESD per IEC 61000-4-2
VESD
>25
kV
Thermal Characteristics
Ratings at 25 °C, ambient temperature unless otherwise specified
Parameter
Test condition
Operation temperature
Storage temperature
Symbol
Value
Unit
TJ
- 55 to + 125
°C
Tstg, TSTG
- 55 to + 150
°C
Electrical Characteristics
Part
Number
Marking
Code
VRWM
VBR(min)
IR(max)
@ It = 1.0 mA
@ VRWM
IPPM
Cj
Pin1 to Pin2
Pin3 NC
IPP = 5.0 A
tp = 8/20 µs
VR = 0 V
f = 1 MHz
VC(max)1)
IPP = 1.0 A
V
V
µA
A
pF
GL05T
L05
5
6
20
9.8
11
17
5
GL12T
L12
12
13.3
1
19
24
12
5
GL15T
L15
15
16.7
1
24
33
10
5
GL24T
L24
24
26.7
1
43
55
5
5
Document Number 85809
Rev. 2, 03-Jun-03
V
www.vishay.com
1
GL05T to GL24T
VISHAY
Vishay Semiconductors
Package Dimensions in Inches (mm)
.12 2 ( 3.1)
.110 (2.8)
.016 ( 0.4)
Top View
.016 ( 0.4)
.016 ( 0.4)
.037 ( 0.95)
.045 ( 1.15)
.037( 0.95) .037( 0.95)
.007 ( 0.17 5)
.005 ( 0.125)
2
ma x . .004 ( 0.1)
1
.056 ( 1.43 )
.052 ( 1.33 )
3
.102 ( 2.6)
.094 ( 2.4)
17418
www.vishay.com
2
Document Number 85809
Rev. 2, 03-Jun-03
GL05T to GL24T
VISHAY
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
Document Number 85809
Rev. 2, 03-Jun-03
www.vishay.com
3