AZETTLER AZ853PS-4.5 Microminiature polarized relay Datasheet

AZ
AZ853
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Conforms to IEC60950/UL1950/EN60950 spacing and high
breakdown voltage
Clearance: 1.0 mm (between coil and contacts)
Creepage: 1.6 mm (between coil and contacts)
Basic Insulation: 150 V Working Voltage, Pollution Degree 2
• Monostable and bistable (latching) versions available
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed for automatic wave soldering and cleaning
• UL file E43203; CSA file 212940
• All plastics meet UL94 V–0, 30 min. oxygen index
CONTACTS
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108 at 3Hz
1 x 105 at 0.5 A, 125 VAC, Res.
2 x 105 at 1.0 A, 30 VDC, Res.
Operate Time
(typical)
3 ms at nominal coil voltage
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Ratings
Resistive load:
Bounce (typical)
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
At 10 mA contact current
1 ms at operate or release
Capacitance
< 1 pF at 10 KHz—open contacts
< 1 pF at 10 KHz—adjacent contact sets
Dielectric Strength
(at sea level)
See table
Dropout
Greater than 10% of nominal coil voltage
Insulation Resistance
109 ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
79 mW (3–12 VDC)
130 mW (24 VDC)
Vibration
Operational, 20 g, 10–55 Hz
Non-destructive, 30 g, 10–55 Hz
Max. Continuous
Dissipation
1.0 W at 20°C (68°F)
0.78 W at 40°C (104°F)
Shock
Operational, 50 g min., 11 ms
Non-destructive, 100 g min., 11 ms
Temperature Rise
At nominal coil voltage
18°C (32°F) (3–12 VDC)
25°C (45°F) (24 VDC)
Max. Solder Temp.
Temp./Time
350°C (662°F) for 3 seconds
260°C (500°F) for 10 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
1.0 grams
1. All values at 20°C (68°F).
Enclosure
P.B.T. polyester
2. Relay may pull in with less than “Must Operate” value.
Terminals
Tinned copper alloy, P.C.
Rated Load
UL/CSA
0.5 A at 125 VAC
2.0 A at 30 VDC
0.3 A at 110 VDC
Material
Silver alloy; gold clad
Resistance
< 75 milliohms initially at 6 V, 1 A
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Temperature
Max. 115°C (239°F)
NOTES
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
6/23/04W
AZ
AZ853
RELAY ORDERING DATA
NON-LATCHING VERSION
Nominal Coil
VDC
1.5
Max. Continuous
VDC
2.25
Coil Resistance
± 10%
16.1
Must Operate
VDC
1.13
64.3
THT
AZ853–1.5
ORDER NUMBER
SMT*
AZ853S–1.5
SMTss*
AZ853S1–1.5
AZ853S1–3
3
4.5
2.25
AZ853–3
AZ853S–3
4.5
6.75
145
3.38
AZ853–4.5
AZ853S–4.5
AZ853S1–4.5
6
9
257
4.5
AZ853–6
AZ853S–6
AZ853S1–6
9
13.5
579
6.75
AZ853–9
AZ853S–9
AZ853S1–9
12
18
1028
9.00
AZ853–12
AZ853S–12
AZ853S1–12
24
36
2504
18.00
AZ853–24
AZ853S–24
AZ853S1–24
LATCHING VERSION
Nominal Coil
VDC
1.5
Max. Continuous
VDC
2.25
Coil Resistance
± 10%
22.5
Must Operate
VDC
1.13
ORDER NUMBER
SMT*
THT
AZ853P–1.5
AZ853PS–1.5
SMTss*
AZ853PS1–1.5
AZ853PS1–3
3
4.5
90
2.25
AZ853P–3
AZ853PS–3
4.5
6.75
203
3.38
AZ853P–4.5
AZ853PS–4.5
AZ853PS1–4.5
6
9
360
4.50
AZ853P–6
AZ853PS–6
AZ853PS1–6
9
13.5
810
6.75
AZ853P–9
AZ853PS–9
AZ853PS1–9
12
18
1440
9.00
AZ853P–12
AZ853PS–12
AZ853PS1–12
24
36
4800
18.00
AZ853P–24
AZ853PS–24
AZ853PS1–24
*Tape and reel available (1K pcs/reel minimum)
INITIAL DIELECTRIC STRENGTH (minimum)
Between open contacts
VRMS, 1 min.
1,000
SURGE
Peak (V)
1,500
Rise Time (µS)
10
2
160
2
10
Between contact sets
1,000
1,500
Between coil and contacts
1,500
2,500
Decay Time* (9µS) (1/2 peak)
160
* Decay time measured from beginning of surge.
Temperature Profile
Packaging Specifications
TEMPERATURE (˚C)
Packaging
Orientation mark side
SOLDERING
Feeding
250
220
Tape Dimensions
Reel dimensions
PREHEATING
COOLING
170
Top cover tape
130
90 - 120 SEC MAX
Embossed carrier tape
120 SEC MAX
30 SEC
MAX
Unit: mm
General tolerance is ± 0.2
6/23/04W
AZ853
Mechanical Data
PC Board Layout
Viewed toward terminals
THT
.22
[5.7]
Wiring Diagram
Viewed toward terminals
(+)
.3
[7.6]
.42
42
[10.6]
.125
[3.2]
8- Ø .03
[Ø0.85]
.09
[2.2]
.35
.020 [9.0]
[0.5]
1
2
3
4
8
7
6
5
.125
[3.2]
.14
06
[1.5]
.008
[0.2]
.016
.126
[3.2]
(-)
SMT
PC Board Layout
Viewed toward terminals
Wiring Diagram
Viewed toward terminals
.22
[5.7]
.3
[7.6]
.42
[10.6]
.125
[3.2]
(+)
.09
[2.2]
1
2
3
4
8
7
6
5
.35
[9.0]
8-.124
[3.1]
.06
[1.5]
.020
[0.5]
.126
[3.2]
.21
[5.3]
.09 .09
[2.2] [2.2]
.38
[9.7]
.126
[3.2]
.008
[0.2]
(-)
8-.031
[0.8]
.05
[1.2]
.29
29
[7.4]
SMTss
.38
[9.7]
.22
[5.7]
.35
[9.0]
.42
[10.6]
.06
[1.5]
.016
[0.4]
.126
[3.2]
.09
[2.2]
.09
[2.2]
.126
[3.2]
.008
[0.2]
.020
[0.5]
.05
[1.2]
.22
[5.7]
Wiring Diagram
Viewed toward terminals
PC Board Layout
Viewed toward terminals
(+)
.3
[7.6]
1
2
3
4
8
7
6
5
8-.09
[2.25]
.175
[4.45]
8-.03
[0.8]
(-)
6/23/04W
Similar pages