UTC BAW56W Dual surface mount switching diode Datasheet

UNISONIC TECHNOLOGIES CO., LTD
BAW56W
Preliminary
DIODE
DUAL SURFACE MOUNT
SWITCHING DIODE
„
DESCRIPTION
The UTC BAW56W is a dual surface mount switching diode
providing the designers with ultra-fast switching and high
conductance.
The UTC BAW56W is suitable for general purpose switching
applications
„
FEATURES
* Ultra-fast switching
* Low switching loss
* High Conductance
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
BAW56WL-AE3-R
BAW56WG-AE3-R
Note: Pin Assignment: A: Anode K: Cathode
BAW56WL-AE3-R
„
Package
SOT-23
Pin Assignment
1
2
3
K1
K2
A2A1
(1)Packing Type
(1) R: Tape Reel
(2)Package Type
(2) AE3: SOT-23
(3)Lead Free
(3) G:Halogen Free, L: Lead Free
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 2
QW-R502-034.a
BAW56W
„
Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
Non-Repetitive Peak Reverse Voltage
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Forward Continuous Current
Average Rectified Output Current
SYMBOL
VRM
VRRM
VRWM
VR
VR(RMS)
IFM
IO
RATINGS
100
UNIT
V
V
V
V
V
mA
mA
75
53
300
150
t=1.0µs
2.0
Non-Repetitive Peak Forward Surge Current
IFSM
A
t=1.0s
1.0
Power Dissipation
PD
200
mW
Junction Temperature
TJ
-65 ~ +150
°C
Storage Temperature
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
Thermal Resistance Junction to Ambient Air
„
SYMBOL
RθJA
RATINGS
625
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
Reverse Breakdown Voltage (Note 1)
SYMBOL
TEST CONDITIONS
VBR(R)
IR = 100µA
IF = 1.0mA
IF = 10mA
Forward Voltage (Note 1)
VFM
IF = 50mA
IF = 150mA
VR = 75V
VR = 75V, TJ = 150°C
Peak Reverse Current (Note 1)
IRM
VR = 25V, TJ = 150°C
VR = 20V
Junction Capacitance
CJ
VR = 0, f = 1.0MHz
IF = IR = 10mA, IRR = 0.1 x IR,
Reverse Recovery Time
TRR
RL = 100Ω
Note: 1. Short duration test pulse used to minimize self-heating effect.
MIN
75
TYP MAX UNIT
V
0.715
0.855
V
1.0
1.25
2.5
µA
50
30
25
nA
2.0
pF
4.0
ns
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R502-034.a
Similar pages