ETC1 DF15A1.850DP-0.65V51 0.65mm pitch smt board to board connector Datasheet

0.65mm Pitch SMT Board to Board Connector
DF15 Series
Corresponding to automatic mounting
The vacuum area is secured the automatic mounting
machine for vacuum.
Figure 1
■Features
1. Compatibility of Miniaturization with Service Efficiency
This series considers the service efficiency to set the pitch to 0.65mm, corresponding to the 0.5mm pitch DF12 series. This connector
widely covers the definition of the mounting space or the board to board size together with the DF12 series.
2. Broad Variations in Board to Board Size
The board to board size is specified at 1mm step between 4mm and 8mm.
Header/Receptacle
DF15#(0.8)-*DS-0.65V
DF15#(1.8)-*DS-0.65V
Combinnation with H size Combinnation with H size
DF15#(3.2)-*DP-0.65V
4
5
DF15#(4.2)-*DP-0.65V
5
6
DF15#(6.2)-*DP-0.65V
7
8
Note1: The stacking height is determined by adding the header and receptacle to the figures followed by the product name
DF15#.
Note2: The stacking height (H size) doesn't include the soldering paste thickness.
3. Correspond to Automatic Mounting
The connector has the vacuum area, which enables the automatic mounting by the embossed tape packaging.
4. Metal Fitting Available
The product including the metal fitting to prevent solder peeling is prepared, considering the mounting on FPC.
■Applications
Mobile phone, LCD(Liquid Crystal Display), MO(Optical Disk), Note PC
A286
■Product Specifications
Operating Temperature Range : –35 to +85ç (Note 1.) Storage Temperature Range : –10 to +60ç (Note 2.)
Current rating : 0.3A
Rating
Storage Humidity Range : 40 to 70% (Note 2.)
Voltage rating : 50V AC Operating Humidity Range : 40 to 80%
Item
Specification
Condition
1. Insulation Resistance
500M ohms min.
100V DC
2. Withstanding Voltage
No flashover or insulation breakdown.
150V AC/1 minute
3. Contact Resistance
50m ohms max
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance:250M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance : 50m ohms max.
(-55ç: 30 minutes 5 to 35ç: 10 minutes
Insulation resistance: 500M ohms min.
(-85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.
50 cycles
8. Resistance to Soldering heat No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Receptacle
Header
Part
Material
Finish
Remarks
Insulator
Polyamide
Beige
UL94V-0
Contact
Phosphor copper
Gold plated
–––––––
Metal fitting
Brass
Tin-lead plated
–––––––
Insulator
Polyamide
Beige
UL94V-0
Contact
Phosphor copper
Gold plated
–––––––
Metal fitting
Brass
Tin-lead plated
–––––––
Note: The gold plated product of pin herder consists of a contact area of gold plated and lead of tin-lead plated
■Ordering Information
●Receptacle/Header
DF15
q
# (*
**) - * DS - 0.65 V (*
**)
w
q Series Name
e
r
t
y
i
r Number of Contacts
: DF15
w Type
Blank
A
B
C
u
20, 30, 40, 50
Fitting
K
∞
K
∞
Boss
K
K
∞
∞
e Product height
t Connector Type
DS : Double-row receptacle
DP : Double-row header
y Contact Pitch
u Contact type
V
Receptacle
: 0.8, 1.8
Header
: 3.2, 4.2, 6.2
: 0.65mm
: Straight SMT type
i (50) : Tube packaging
(51) : Embossed tape packaging
A287
■Receptacle
Without metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated, tube packaging
(51) :Gold plated, embossed tape packaging
●Product Height: 0.8mm product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
7.35
5.85
D
E
DF15A(0.8)-20DS-0.65V(**) 677-0012-4-**
20
DF15A(0.8)-30DS-0.65V(**) 677-0013-7-**
30
13.1
DF15A(0.8)-40DS-0.65V(**) 677-0014-0-**
40
16.35 13.85 12.35 13.85 15.15
DF15A(0.8)-50DS-0.65V(**) 677-0015-2-**
50
19.6
DF15C(0.8)-20DS-0.65V(**) 677-0032-1-**
20
DF15C(0.8)-30DS-0.65V(**) 677-0033-4-**
30
13.1
DF15C(0.8)-40DS-0.65V(**) 677-0034-7-**
40
16.35 13.85 12.35 13.85
DF15C(0.8)-50DS-0.65V(**) 677-0035-0-**
50
19.6
9.85
9.85
10.6
17.1
7.35
10.6
17.1
9.1
15.6
5.85
9.1
15.6
7.35
10.6
17.1
7.35
10.6
17.1
F
G
H
8.65
11.9
3
0.8
0.7
36
29
48
3
0.8
0.7
–
36
29
CL No.
Number of Contacts
Unit: mm
A
B
C
7.35
5.85
D
E
DF15A(1.8)-20DS-0.65V(**) 677-0052-9-**
20
DF15A(1.8)-30DS-0.65V(**) 677-0053-1-**
30
13.1
DF15A(1.8)-40DS-0.65V(**) 677-0054-4-**
40
16.35 13.85 12.35 13.85 15.15
DF15A(1.8)-50DS-0.65V(**) 677-0055-7-**
50
19.6
9.85
10.6
17.1
9.1
15.6
7.35
10.6
17.1
DF15C(1.8)-20DS-0.65V(**) 677-0072-6-**
20
DF15C(1.8)-30DS-0.65V(**) 677-0073-9-**
30
13.1
DF15C(1.8)-40DS-0.65V(**) 677-0074-1-**
40
16.35 13.85 12.35 13.85
9.85
7.35
10.6
5.85
9.1
7.35
10.6
F
G
H
8.65
11.9
4
1.8
1.7
18.4
–
Remarks
36
29
Without metal
fitting
With boss
24
–
–
Tube Packaging Quantity( pcs.)
48
48
4
1.8
1.7
–
50
19.6 17.1 15.6 17.1
DF15C(1.8)-50DS-0.65V(**) 677-0075-4-**
Note1: Please order the tube packaging product, multiplying the tube packaging number by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
A288
Without metal
fitting
Without boss
24
●Product Height: 1.8mm Product
Part Number
Without metal
fitting
With boss
24
–
–
Remarks
48
18.4
–
Tube Packaging Quantity( pcs.)
36
29
24
Without metal
fitting
Without boss
■Receptacle
With metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated tube packaging
(51) :Gold plated embossed tape packaging
●Product Height: 0.8mm Product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
D
E
F
G
DF15B(0.8)-20DS-0.65V(**) 677-0002-0-**
20
DF15B(0.8)-30DS-0.65V(**) 677-0003-3-**
30
13.10 10.6
DF15B(0.8)-40DS-0.65V(**) 677-0004-6-**
40
16.35 13.85 12.35 16.15 14.95 13.85 15.15
DF15B(0.8)-50DS-0.65V(**) 677-0005-9-**
50
19.60 17.1 15.6 19.4 18.2 17.1 18.4
DF15B(0.8)-20DS-0.65V(**) 677-0022-8-**
20
DF15B(0.8)-30DS-0.65V(**) 677-0023-0-**
30
13.10 10.6
DF15B(0.8)-40DS-0.65V(**) 677-0024-3-**
40
16.35 13.85 12.35 16.15 14.95 13.85
–
DF15B(0.8)-50DS-0.65V(**) 677-0025-6-**
50
19.60 17.1 15.6 19.4 18.2 17.1
–
H
J
K
9.85 7.35 5.85 9.65 8.45 7.35 8.65
9.1 12.9 11.7 10.6 11.9
9.85 7.35 5.85 9.65 8.45 7.35
9.1 12.9 11.7 10.6
3
0.8
0.7
36
29
CL No.
Number of Contacts
With metal fitting
With boss
24
48
3
0.8
0.7
36
29
With metal fitting
Without boss
24
●Product Height: 1.8mm Product
Part Number
Remarks
48
–
–
Tube Packaging Quantity( pcs.)
Unit: mm
A
B
C
D
E
F
G
DF15B(1.8)-20DS-0.65V(**) 677-0042-5-**
20
DF15B(1.8)-30DS-0.65V(**) 677-0043-8-**
30
13.1 10.6
DF15B(1.8)-40DS-0.65V(**) 677-0044-0-**
40
16.35 13.85 12.35 16.15 14.95 13.85 15.15
DF15B(1.8)-50DS-0.65V(**) 677-0045-3-**
50
19.6 17.1 15.6 19.4 18.2 17.1 18.4
DF15B(1.8)-20DS-0.65V(**) 677-0062-2-**
20
DF15B(1.8)-30DS-0.65V(**) 677-0063-5-**
30
13.1 10.6
DF15B(1.8)-40DS-0.65V(**) 677-0064-8-**
40
16.35 13.85 12.35 16.15 14.95 13.85
H
J
K
9.85 7.35 5.85 9.65 8.45 7.35 8.65
9.1 12.9 11.7 10.6 11.9
9.85 7.35 5.85 9.65 8.45 7.35
9.1 12.9 11.7 10.6
–
Remarks
48
4
1.8
1.7
36
29
With metal fitting
With boss
24
–
–
Tube Packaging Quantity( pcs.)
48
4
1.8
1.7
50
19.6 17.1 15.6 19.4 18.2 17.1
–
DF15B(1.8)-50DS-0.65V(**) 677-0065-0-**
Note1: Please order the tube packaging product, by multiplying the packaging quantity by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
36
29
With metal fitting
Without boss
24
A289
■Header Without metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated tube packaging
(51) :Gold plated embossed tape packaging
●Product Height: 3.2mm Product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
7.45
5.85
D
E
DF15A(3.2)-20DP-0.65V(**) 677-0092-3-**
20
DF15A(3.2)-30DP-0.65V(**) 677-0093-6-**
30
13.1
DF15A(3.2)-40DP-0.65V(**) 677-0094-9-**
40
16.35 13.95 12.35 13.55 15.15
DF15A(3.2)-50DP-0.65V(**) 677-0095-1-**
50
19.6
DF15C(3.2)-20DP-0.65V(**) 677-0112-9-**
20
DF15C(3.2)-30DP-0.65V(**) 677-0113-1-**
30
13.1
DF15C(3.2)-40DP-0.65V(**) 677-0114-4-**
40
16.35 13.95 12.35 13.55
DF15C(3.2)-50DP-0.65V(**) 677-0115-7-**
50
19.6
9.85
9.85
10.7
17.2
7.45
10.7
17.2
9.1
15.6
5.85
9.1
15.6
7.05
10.3
16.8
7.05
10.3
16.8
F
G
8.65
11.9
3.2
3.1
29
Without metal
fitting
With boss
48
3.2
3.1
–
Note1: Please order the tube packaging product, , by multiplying the packaging quantity by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
A290
36
24
–
–
Remarks
48
18.4
–
Tube Packaging Quantity( pcs.)
36
29
24
Without metal
fitting
Without boss
■Header Without metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated tube packaging
(51) :Gold plated embossed tape packaging
●Product Height: 4.2mm Product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
7.45
5.85
D
E
DF15A(4.2)-20DP-0.65V(**) 677-0132-6-**
20
DF15A(4.2)-30DP-0.65V(**) 677-0133-9-**
30
13.1
DF15A(4.2)-40DP-0.65V(**) 677-0134-1-**
40
16.35 13.95 12.35 13.55 15.15
DF15A(4.2)-50DP-0.65V(**) 677-0135-4-**
50
19.6
DF15C(4.2)-20DP-0.65V(**) 677-0152-3-**
20
DF15C(4.2)-30DP-0.65V(**) 677-0153-6-**
30
13.1
DF15C(4.2)-40DP-0.65V(**) 677-0154-9-**
40
16.35 13.95 12.35 13.55
DF15C(4.2)-50DP-0.65V(**) 677-0155-1-**
50
19.6
9.85
9.85
10.7
17.2
7.45
10.7
17.2
9.1
15.6
5.85
9.1
15.6
7.05
10.3
16.8
7.05
10.3
16.8
F
G
8.65
11.9
4.2
4.1
36
29
48
4.2
4.1
–
36
29
CL No.
Number of Contacts
Without metal
fitting
Without boss
24
●Product Height: 6.2mm Product
Part Number
Without metal
fitting
With boss
24
–
–
Remarks
48
18.4
–
Tube Packaging Quantity( pcs.)
Unit: mm
A
B
C
7.45
5.85
D
E
DF15A(6.2)-20DP-0.65V(**) 677-0172-0-**
20
DF15A(6.2)-30DP-0.65V(**) 677-0173-3-**
30
13.1
DF15A(6.2)-40DP-0.65V(**) 677-0174-6-**
40
16.35 13.95 12.35 13.55 15.15
DF15A(6.2)-50DP-0.65V(**) 677-0175-9-**
50
19.6
9.85
10.7
17.2
9.1
15.6
7.05
10.3
16.8
DF15C(6.2)-20DP-0.65V(**) 677-0192-8-**
20
DF15C(6.2)-30DP-0.65V(**) 677-0193-0-**
30
13.1
DF15C(6.2)-40DP-0.65V(**) 677-0194-3-**
40
16.35 13.95 12.35 13.55
9.85
7.45
10.7
5.85
9.1
7.05
10.3
F
G
8.65
11.9
6.2
6.1
36
29
Without metal
fitting
With boss
24
–
–
Remarks
48
18.4
–
Tube Package Quantity( pcs.)
48
6.2
6.1
50
–
19.6 17.2 15.6 16.8
DF15C(6.2)-50DP-0.65V(**) 677-0195-6-**
Note1: Please order the tube packaging product, by multiplying the packaging quantity by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
36
29
Without metal
fitting
Without boss
24
A291
■Header
With metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated tube packaging
(51) :Gold plated embossed tape packaging
●Product Height: 3.2mm Product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
D
E
F
G
DF15B(3.2)-20DP-0.65V(**) 677-0082-0-**
20
DF15B(3.2)-30DP-0.65V(**) 677-0083-2-**
30
13.1 10.7
DF15B(3.2)-40DP-0.65V(**) 677-0084-5-**
40
16.35 13.95 12.35 16.15 14.95 13.55 15.15
DF15B(3.2)-50DP-0.65V(**) 677-0085-8-**
50
19.6 17.2 15.6 19.4 18.2 16.8 18.4
DF15B(3.2)-20DP-0.65V(**) 677-0102-5-**
20
DF15B(3.2)-30DP-0.65V(**) 677-0103-8-**
30
13.1 10.7
DF15B(3.2)-40DP-0.65V(**) 677-0104-0-**
40
16.35 13.95 12.35 16.15 14.95 13.55
–
DF15B(3.2)-50DP-0.65V(**) 677-0105-3-**
50
19.6 17.2 15.6 19.4 18.2 16.8
–
H
9.85 7.45 5.85 9.65 8.45 7.05 8.65
9.1 12.9 11.7 10.3 11.9
9.85 7.45 5.85 9.65 8.45 7.05
9.1 12.9 11.7 10.3
3.2
3.1
Remarks
36
29
With metal fitting
With boss
24
48
–
–
Tube Packaging Quantity( pcs.)
48
3.2
Note1: Please order the tube packaging product, by multiplying the packaging quantity by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
A292
J
3.1
36
29
24
With metal fitting
Without boss
■Header
With metal fitting
[Specific No.] –* *, (* *)
(50) :Gold plated tube packaging
(51) :Gold plated embossed tape packaging
●Product Height: 4.2mm Product
Part Number
CL No.
Number of Contacts
Unit: mm
A
B
C
D
E
F
G
DF15B(4.2)-20DP-0.65V(**) 677-0122-2-**
20
DF15B(4.2)-30DP-0.65V(**) 677-0123-5-**
30
13.1 10.7
DF15B(4.2)-40DP-0.65V(**) 677-0124-8-**
40
16.35 13.95 12.35 16.15 14.95 13.55 15.15
DF15B(4.2)-50DP-0.65V(**) 677-0125-0-**
50
19.6 17.2 15.6 19.4 18.2 16.8 18.4
DF15B(4.2)-20DP-0.65V(**) 677-0142-0-**
20
DF15B(4.2)-30DP-0.65V(**) 677-0143-2-**
30
13.1 10.7
DF15B(4.2)-40DP-0.65V(**) 677-0144-5-**
40
16.35 13.95 12.35 16.15 14.95 13.55
–
DF15B(4.2)-50DP-0.65V(**) 677-0145-8-**
50
19.6 17.2 15.6 19.4 18.2 16.8
–
H
J
9.85 7.45 5.85 9.65 8.45 7.05 8.65
9.1 12.9 11.7 10.3 11.9
9.85 7.45 5.85 9.65 8.45 7.05
9.1 12.9 11.7 10.3
4.2
4.1
36
29
CL No.
Number of Contacts
With metal fitting
With boss
24
48
4.2
4.1
36
29
With metal fitting
Without boss
24
●Product Height: 6.2mm Product
Part Number
Remarks
48
–
–
Tube Packaging Quantity( pcs.)
Unit: mm
A
B
C
D
E
F
G
DF15B(6.2)-20DP-0.65V(**) 677-0162-7-**
20
DF15B(6.2)-30DP-0.65V(**) 677-0163-0-**
30
13.1 10.7
DF15B(6.2)-40DP-0.65V(**) 677-0164-2-**
40
16.35 13.95 12.35 16.15 14.95 13.55 15.15
DF15B(6.2)-50DP-0.65V(**) 677-0165-5-**
50
19.6 17.2 15.6 19.4 18.2 16.8 18.4
DF15B(6.2)-20DP-0.65V(**) 677-0182-4-**
20
DF15B(6.2)-30DP-0.65V(**) 677-0183-7-**
30
13.1 10.7
DF15B(6.2)-40DP-0.65V(**) 677-0184-0-**
40
16.35 13.95 12.35 16.15 14.95 13.55
–
DF15B(6.2)-50DP-0.65V(**) 677-0185-2-**
50
19.6 17.2 15.6 19.4 18.2 16.8
–
H
J
9.85 7.45 5.85 9.65 8.45 7.05 8.65
9.1 12.9 11.7 10.3 11.9
9.85 7.45 5.85 9.65 8.45 7.05
9.1 12.9 11.7 10.3
Remarks
48
6.2
6.1
36
29
With metal fitting
With boss
24
48
–
–
Tube Packaging Quantity( pcs.)
6.2
6.1
36
29
With metal fitting
Without boss
24
Note1: Please order the tube packaging product, by multiplying the packaging quantity by an integer.
Note2: Please order the embossed tape packaging product per reel. (1000 pcs./reel)
A293
BRecommended PCB mounting pattern
(Unit: mm)
●Receptacle
Note1:
If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact.
●Header
(Unit: mm)
Unit: mm
Number of Contacts
20
30
A294
C
G
5.85
8.65
9.1
11.9
L
M
7.85 10.25
11.1
13.5
40
12.35 15.15 14.35 16.75
50
15.6
18.4
17.6
20
BEmbossed Carrier Tape Dimensions
●Receptacle
(20, 30, 40 contacts)
(50 contacts)
●Header
(20, 30, 40 contacts)
(50 contacts)
●Reel Dimensions
Unit:mm
Connector
A
B
C
D
Connector
A
B
C
D
DF15#(0.8)-20DS-0.65V
16
7.5
3.3
16.4
E
DF15#(3.2)-20DP-0.65V
16
7.5
3.5
16.4
DF15#(0.8)-30DS-0.65V
24
11.5
3.3
24.4
DF15#(3.2)-30DP-0.65V
24
11.5
3.5
24.4
DF15#(0.8)-40DS-0.65V
24
11.5
3.3
24.4
DF15#(3.2)-40DP-0.65V
24
11.5
3.5
24.4
DF15#(0.8)-50DS-0.65V
32
14.2
3.3
32.4
DF15#(3.2)-50DP-0.65V
32
14.5
3.5
32.4
DF15#(1.8)-20DS-0.65V
16
7.5
4.3
16.4
DF15#(4.2)-20DP-0.65V
16
7.5
4.5
16.4
DF15#(1.8)-30DS-0.65V
24
11.5
4.3
24.4
DF15#(4.2)-30DP-0.65V
24
11.5
4.5
24.4
DF15#(1.8)-40DS-0.65V
24
11.5
4.3
24.4
DF15#(4.2)-40DP-0.65V
24
11.5
4.5
24.4
DF15#(1.8)-50DS-0.65V
32
14.2
4.3
32.4
DF15#(4.2)-50DP-0.65V
32
14.5
4.5
32.4
DF15#(6.2)-20DP-0.65V
16
7.5
6.5
16.4
DF15#(6.2)-30DP-0.65V
24
11.5
6.5
24.4
DF15#(6.2)-40DP-0.65V
24
11.5
6.5
24.4
DF15#(6.2)-50DP-0.65V
32
14.5
6.5
32.4
330
E
330
380
A295
BPrecautions
1. Recommended Temperature Profile (SMT)
Note1: Maximum twice action is allowed under the same condition. However, the interval between
the first process and second actions must be maintained at the room temperature.
Note2: The temperature indicates the board surface temperature in the connector lead area.
2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds
3. Recommended Screen Thickness (SMT) 0.15mm
4. Board Warp (SMT)
Max 0.03mm in the connector center area, based on the both connector edges
5. Cleaning Condition
Refer to the "Nylon Connector Use Hand book".
6. Cautions
■The receptacle is designed in a structure where contacts are exposed. Touching it with bare
hands would cause contact failure or electrostatic element damage.
■Where no board is mounted, the insertion or extraction will cause damage or deformation in the contacts.
■Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
■Excessive scoop insertion or extraction may result in damage.
■In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
■The color phase of this product may be slightly different from that of the formed product
according to the manufacturing lot. However, the difference doesn't affect the performance.
A296
Similar pages