ITT CL101J7RS205QA Single pole power rocker switch Datasheet

C&K CL Series
Single Pole Power Rocker Switches
Features/Benefits
Typical Applications
• Illuminated versions available
• Positive detent
• Snap-in mounting
• Floor care products
• Power outlet strips
• Small appliances
®C
US
Specifications
Materials
CONTACT RATING:
UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages 16 thru 18. For additional options not shown in catalog, consult Customer Service Center.
Switch
CL101
CL102
CL12 *
Function
SPDT On-None-On
SPST On-None-Off
SPST On-None-Off
Actuator
J7 Rocker
J9 Illuminated rocker
Actuator Color
2 (STD.) Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 (STD.) Snap-in, black
S1 Snap-in, white
Termination
05 (STD.) .250” quick connect
Actuator Marking
(NONE) (STD.) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF Contact Rating
QA (STD.) Silver
Lamp Rating
(NONE) (STD.) No lamp
7 125 VAC neon
8 250 VAC neon
* CL12 - for switches with both marking and illumination
Dimensions are shown: Inch (mm)
Dimensions subject to change
16
www.ittcannon.com
C&K CL Series
Single Pole Power Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
NO.
POLES
CL101
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
ON
NONE
SCHEMATIC
ON
N/A
SP
CL102
ON
NONE
2-1
2-3
OFF
OR
For Illuminated
Version
CL12 *
ON
NONE
OFF
* CL12 - for switches with both marking and illumination
ACTUATOR
J7
J9
ROCKER
ILLUMINATED ROCKER
NOTE: J9 actuator available with CL102 switch function only.
ACTUATOR COLOR
OPTION
CODE
ACTUATOR
COLOR
2
1
3
R
A
G
(STD.) BLACK
WHITE
RED
RED, ILLUMINATED
AMBER, ILLUMINATED
GREEN, ILLUMINATED
Dimensions are shown: Inch (mm)
Dimensions subject to change
17
www.ittcannon.com
C&K CL Series
Single Pole Power Rocker Switches
MOUNTING STYLE/COLOR
S2
S1
(STD.) SNAP-IN, BLACK
SNAP-IN, WHITE
PANEL MOUNTING
PANEL THICKNESS
0.030-0.049 (0,75-1,25)
0.049-0.079 (1,25-2,0)
0.079-0.118 (2,0-3,0)
“X”
1.126-.004 (28,6-0,1)
1.134-.004 (28,8-0,1)
1.150-.004 (29,2-0,1)
“Y”
0.551+.004 (14,0+0,1)
0.551+.004 (14,0+0,1)
0.551+.004 (14,0+0,1)
TERMINATION
05
(STD.) .250” QUICK CONNECT
ACTUATOR MARKING
NONE
H
Ol
(STD.) NO MARKING
D
ON-OFF
P O-
NOTE: Orientation of actuator marking and terminals.
Dimensions are shown: Inch (mm)
Dimensions subject to change
18
www.ittcannon.com
C&K CL Series
Single Pole Power Rocker Switches
CONTACT MATERIAL
OPTION
CODE
CONTACT AND TERMINAL MATERIAL
QA (STD.)
SILVER
RATINGS
POWER
16 AMPS @ 125 VAC; 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP (®C
US)
LAMP RATING
(NONE) NO LAMP
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
NOTE: Lamp rating for J9 actuator option.
Dimensions are shown: Inch (mm)
Dimensions subject to change
19
www.ittcannon.com
Similar pages