Willow DM87P-2321-35-5220 Industrial relay Datasheet

DM87
industrial relays
DM87N sensitive
• Cadmium - free contacts • Height 15,7 mm
• 5000 V / 10 mm reinforced insulation
• For PCB and plug-in sockets
• Accessories: sockets and modules
• AC and DC coils - standard (DM87N, DM87L, DM87P),
DC coils - sensitive (DM87N sensitive)
• Recyclable packing
• Recognitions, certificates, directives: RoHS,
VDE
R
Contacts
Contact number & arrangement
Contact material
Max. switching voltage
Min. switching voltage
Rated load
AC/DC
AC1
DC1
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Resistance
Max. operating frequency
• at rated load
• no load
AC1
AC1
Coil
Rated voltage
50/60 Hz AC
DC
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
DC
Insulation
Insulation category
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• coil - contact
• contact - contact
Contact - coil distance
• clearance
• creepage
600 cycles/hour
72 000 cycles/hour
12...240 V standard version
3...110 V standard version
5...48 V
AC: ≥ 0.15 Un
DC: ≥ 0.1 Un
see Tables 1, 3 and Fig. 5, 7 standard version
see Table 2 and Fig. 6 sensitive version
0,75 VA standard version
0.4...0.48 W standard version
0.25 W
sensitive version
5 000 V AC
1 000 V AC
≥ 10 mm
≥ 10 mm
7 ms
3 ms
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
> 105 12 A, 250 V AC standard version
> 1,7 x 105 10 A, 250 V AC sensitive version
see Fig. 2
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 12.7 x 15.7 mm
14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 40 or IP 67
RTII IEC 61810-7
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
Standard contact materials are marked with bold type.
Page 1 of 5
sensitive version
C250 / B400
400 V AC
4 000 V AC
III
IEC 61810-5 (PN-IEC 664-1)
3
General data
Operating time (typical value)
Release time (typical value)
Electrical life
• resistive AC1
• cosφ
• L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
1C/O, 1NO
AgNi, AgNi/Au 5 um, AgSnO2
400 V / 300 V
5 V AgNi, 5 V AgNi/Au 5 um, 10 V AgSnO2
12 A / 250 V AC standard version
10 A / 250 V AC sensitive version
12 A / 24 V DC standard version
10 A / 24 V DC sensitive version
5 mA AgNi, 2 mA AgNi/Au 5 um, 10 mA AgSnO2
25 A AgSnO2 standard version
20 A AgSnO2 sensitive version
12 A standard version
10 A sensitive version
3 000 VA standard version
2 500 VA sensitive version
0.3 W AgNi, 0.05 W AgNi/Au 5 um, 1 W AgSnO2
≤ 100 mΩ
www.aecsensors.com
Sales Department Tel: (888) 847-6552
DM87
industrial relays
Table 1
Coil data - standard DC voltage version
Coil resistance
±10% at 20 °C
Ω
Rated voltage
V DC
Coil code
1003
1005
1006
1009
1012
1018
1024
1036
1048
1060
1110
3
5
6
9
12
18
24
36
48
60
110
22
60
90
200
360
710
1 440
3 140
5 700
7 500
25 200
Coil operating range at 20 °C
V DC
min.
2.1
3.5
4.2
6.3
8.4
12.6
16.8
25.2
33.6
42.0
77.0
max.
7.6
12.7
15.3
22.9
30.6
45.9
61.2
91.8
122.4
153.0
280.0
Standard coil rated voltages marked with bold type.
Table 2
Coil data - sensitive DC voltage version (only for DM87N)
S005
S006
S009
S010
S012
S018
S024
S048
102
144
330
400
580
1 300
2 300
9 340
5
6
9
10
12
18
24
48
3.75
4.50
6.75
7.50
9.00
13.50
18.00
36.00
Table 3
Coil data - AC 50/60 Hz voltage version
Coil code
5012
5024
5048
5060
5110
5115
5120
5220
5230
5240
Rated voltage
V AC
12
24
48
60
110
115
120
220
230
240
Coil resistance
at 20 °C
Ω
100
400
1 550
2 600
8 900
9 600
10 200
35 500
38 500
42 500
Acceptable
resistance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±15%
Coil operating range at 20 °C
V AC - 50 Hz
min.
max.
9.6
19.2
38.4
48.0
88.0
92.0
96.0
176.0
184.0
192.0
13.2
28.8
57.6
72.0
132.0
138.0
144.0
264.0
276.0
288.0
Standard coil rated voltages marked with bold type.
Page 2 of 5
www.aecsensors.com
15.0
18.0
27.0
30.0
36.0
54.0
72.0
144.0
Sales Department Tel: (888) 847-6552
DM87
industrial relays
Connections diagram (pin side view)
Dimensions
DM87N, DM87N sensitive
7.5
14 (5)
11 (4)
14 (5)
11 (4)
14 (5)
11 (4)
12 (3)
12 (3)
16.5
3.5 3.5
7.5
DM87L
5
14 (5)
11 (4)
5
15
A1 (1) A2 (2)
A1 (1) A2 (2)
A1 (1) A2 (2)
DM87N
1C/O
DM87N
1NO
DM87N sensitive
1C/O
14 (5)
DM87P
DM87N sensitive
1NO
14 (5)
14 (5)
11 (4)
A1 (1) A2 (2)
14 (5)
11 (4)
11 (4)
11 (4)
12 (3)
7.5
12 (3)
5
5
A1 (1) A2 (2)
A1 (1) A2 (2)
A1 (1) A2 (2)
A1 (1) A2 (2)
DM87L
1C/O
DM87L
1NO
DM87P
1C/O
DM87P
1NO
15
29
Terminal (pin)
A1(1); A2(2)
15.7
[mm]
Ø 0.6
Drilling hole:
• for relays
• for sockets
Fig. 1
12(3); 11(4);
14(5)
0.5 x 0.9
Ø 1.3 + 0.1 mm
Ø 1.5 + 0.1 mm
Electrical life reduction factor
at AC inductive load
Fig. 2
1.0
Reduction factor
0.9
0.8
0.7
0.6
0.5
0.4
0.3
1.0
0.9
0.8
0.7
0.6
0.5
0.4
Power factor
0
Page 3 of 5
0.4
0.8
1.2
1.6
www.aecsensors.com
2.0
2.4
2.8 3.0
Sales Department Tel: (888) 847-6552
0.3
0.2
DM87
industrial relays
Max. DC resistive load breaking capacity
- standard version
Fig. 3
Max. DC resistive load breaking capacity
- sensitive version
50
50
DC current [A]
12
10
DC current [A]
Fig. 4
5
10
8
5
2
2
1
1
0.5
0.5
0.1
10
20
30 40 50
100
200
0.1
10
300
20
30
40 50
DC voltage [V]
Coil operating range - DC
- standard version
Fig. 5
100
200
DC voltage [V]
Coil operating range - DC
- sensitive version
3.0
300
Fig. 6
3.0
2.8
2.8
n
n
n
2.6
n
2.6
2.4
2.4
2.2
2.2
2.0
2.0
1.8
1.8
1.6
1.6
1.4
1.4
1.2
1.2
1.0
1.0
0.8
0.8
0.6
0.6
0
10
20
30
40
50
60
70
80
90 100
Coil operating range - AC 50 Hz
Fig. 7
n
1.6
1.4
1.2
1.0
0.8
Page 4 of 5
10
20
30
40
50
60
70
80
90 100
Description of Fig. 5, 6 and 7
A - relations between make voltage and ambient temperature at
no load on contacts. Coil temperature and ambient temperature
are equal before coil energizing. Make voltage is not higher than
the value read on Y axis (multiplication of rated voltage).
B - relations between make voltage and ambient temperature
after initial coil heating up with 1,1 Un, at continues load of In on
contacts. Make voltage is not higher than the value read on Y
axis (multiplication of rated voltage).
1, 2, 3 - values on Y axis represent allowed overvoltage on coil at
certain ambient temperature and contact load:
1 - no load
2 - 50% of rated load
3 - rated load
1.8
0.6
0
0
10
20
30
40
50
60
www.aecsensors.com
70
80
90 100
Sales Department Tel: (888) 847-6552
DM87
industrial relays
Mounting openings raster
(solder side view)
3.5 3.5
Mounting
Relays DM87N, DM87N sensitive are designed for:
• direct PCB mounting • screw terminals plug-in sockets
DZT92 and DZM92 with clip DZT80-0040, 35 mm DIN
rail mount, EN 50022 or on panel mounting. Signalling /
protecting modules type DM... are available with sockets
(see page 240) • plug-in sockets for PCB mounting DC35
with clip DH16-2.
16.5
DM87N
1C/O
DM87N sensitive
1C/O
5 × Ø 1.3
2.5 × 2.5
5
5
15
Relays DM87L, DM87P are designed for: • direct PCB
mounting • screw terminals plug-in sockets DZT80 and
DZM80 with clip DZT80-0040, 35 mm DIN rail mount,
EN 50022 or on panel mounting. Signalling / protecting
modules type DM... are available with sockets
• plug-in sockets for PCB mounting DW80 and DC50
with clip DH16-2.
DM87L
1C/O
5 × Ø 1.3
2.5 × 2.5
5
5
15
DM87P
1C/O
5 × Ø 1.3
2.5 × 2.5
Ordering codes
Cover protection
category
Type
Type of raster
Contact
material
Contact number &
arrangement
Connection mode
Coil code
D M 8 7
Type of raster - standard version
N - 3.5 mm raster
L - 5.0 mm left raster
P - 5.0 mm right raster
see Tables 1, 2, 3
Type of raster - sensitive version
N - 3.5 mm raster
Contact material
20 - AgNi
23 - AgNi/Au 5 um
30 - AgSnO2
Contact number & arrangement
11 - 1C/O
21 - 1NO
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Examples of ordering codes:
DM87N - 2011 - 25 - 1012 relay DM87, 3,5 mm raster, contact material AgNi, with one changeover contact, in cover
IP 40, for PCB and sockets, voltage version 12 V DC
American Electronic Components, Inc. 1101 Lafayette Street, Elkhart, IN 46516
Page 5 of 5
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Similar pages