IN74AC20 DUAL 4-INPUT NAND GATE High-Speed Silicon-Gate CMOS • • • • • The IN74AC20 is identical in pinout to the LS/ALS20, HC/HCT20. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C High Noise Immunity Characteristic of CMOS Devices Outputs Source/Sink 24 mA ORDERING INFORMATION IN74AC20N Plastic IN74AC20D SOIC TA = -40° to 85° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT NC = NO CONNECTION PIN 14 =VCC PIN 7 = GND PINS 3,11 = NO CONNECTION FUNCTION TABLE Inputs Outpu t A B C D Y L X X X H X L X X H X X L X H X X X L H H H H H L X = don’t care 1 IN74AC20 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V VIN DC Input Voltage (Referenced to GND) -0.5 to VCC +0.5 V VOUT DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V IIN DC Input Current, per Pin mA ±20 IOUT DC Output Sink/Source Current, per Pin mA ±50 ICC DC Supply Current, VCC and GND Pins mA ±50 PD Power Dissipation in Still Air, Plastic DIP+ 750 mW SOIC Package+ 500 Tstg Storage Temperature -65 to +150 °C 260 TL Lead Temperature, 1 mm from Case for 10 °C Seconds (Plastic DIP or SOIC Package) * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C SOIC Package: : - 7 mW/°C from 65° to 125°C RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC DC Supply Voltage (Referenced to GND) VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND) TJ Junction Temperature (PDIP) TA Operating Temperature, All Package Types IOH Output Current - High IOL Output Current - Low t r, tf Input Rise and Fall Time * VCC =3.0 V VCC =4.5 V (except Schmitt Inputs) VCC =5.5 V * VIN from 30% to 70% VCC Min 2.0 0 -40 0 0 0 Max 6.0 VCC Unit V V 140 +85 -24 24 150 40 25 °C °C mA mA ns/V This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. 2 IN74AC20 DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND) Guaranteed VCC Limits Symbol Parameter Test Conditions V 25 °C -40°C to 85°C 2.1 2.1 VIH Minimum High- VOUT=0.1 V or VCC-0.1 V 3.0 3.15 3.15 Level Input 4.5 3.85 3.85 Voltage 5.5 0.9 0.9 VIL Maximum Low - VOUT=0.1 V or VCC-0.1 V 3.0 1.35 1.35 Level Input 4.5 1.65 1.65 Voltage 5.5 2.9 2.9 VOH Minimum High- IOUT ≤ -50 µA 3.0 4.4 4.4 Level Output 4.5 5.4 5.4 Voltage 5.5 * VIN=VIH or VIL 2.46 2.56 IOH=-12 mA 3.0 3.76 3.86 IOH=-24 mA 4.5 4.76 4.86 5.5 IOH=-24 mA 0.1 0.1 VOL Maximum Low- IOUT ≤ 50 µA 3.0 0.1 0.1 Level Output 4.5 0.1 0.1 Voltage 5.5 * VIN=VIH 0.44 0.36 IOL=12 mA 3.0 0.44 0.36 IOL=24 mA 4.5 0.44 0.36 5.5 IOL=24 mA IIN Maximum Input VIN=VCC or GND 5.5 ±0.1 ±1.0 Leakage Current VOLD=1.65 V Max IOLD +Minimum 5.5 75 Dynamic Output Current VOHD=3.85 V Min IOHD +Minimum 5.5 -75 Dynamic Output Current VIN=VCC or GND ICC Maximum 5.5 4.0 40 Quiescent Supply Current (per Package) * All outputs loaded; thresholds on input associated with output under test. +Maximum test duration 2.0 ms, one output loaded at a time. Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective VCC 3 Unit V V V V µA mA mA µA limit @ 5.5 V IN74AC20 AC ELECTRICAL CHARACTERISTICS(CL=50pF,Input tr=tf=3.0 ns) VCC Guaranteed Limit * Symbol Parameter V tPLH Propagation Delay, Input A , B, C or D to Output Y (Figure 1) Propagation Delay, Input A , B, C or D to Output Y (Figure 1) Maximum Input Capacitance 3.3 5.0 3.3 5.0 5.0 tPHL CIN * 25 °C Min Max 2.0 8.5 1.5 7.0 1.5 7.0 1.5 6.0 4.5 -40°C to 85°C Min Max 1.5 10.0 1.0 8.0 1.0 9.0 1.0 7.0 4.5 Typical @25°C,VCC=5.0 V 40 CPD Power Dissipation Capacitance Voltage Range 3.3 V is 3.3 V ±0.3 V Voltage Range 5.0 V is 5.0 V ±0.5 V Figure 1. Switching Waveforms 4 Unit ns ns pF pF