EPCOS B25655J8567K000 Film capacitors - power electronic capacitor Datasheet

Film capacitors – Power electronic capacitors
PCC series
Series/Type:
Ordering code:
B25655
B25655J8567K***
Date:
Version:
June 2009
1
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
Film capacitors – Power electronic capacitors
Identification/Classification 2
(header 2 + bottom left header bar):
PCC series
Ordering code: (top right header bar)
B25655J8567K***
Series/Type: (top right header bar)
B25655
Preliminary data (optional):
(if necessary)
Preliminary data
Department:
FK PC OH RD
Date:
June 2009
Version:
1
 EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited
Film capacitors – Power electronic capacitors
PCC series
B25655J8567K***
B25655
Preliminary data
Characteristics
560 µF ±10%
CR

VR
800 V DC
WR
180 Ws
Imax
80 A
Lself
20 nH
2 · 10–4
tan 0
Rs
2 m
Maximum ratings
1000 V
Vmax
Vs
1200 V
î
1.7 kA
Is
6.7 kA
(dV/dt)max
3 V/µs
(dV/dt)s
12 V/µs
Test data
VTT
VTC
Rins · C
tan (50 Hz)
1200 V DC, 10 s
2500 V AC, 60 s
≥ 10000 s
≤ 12 · 10-4
Climatic category
40/070/21 (IEC 68-1/2)
Tmin
–40 °C
Tmax
+70 °C
Humidity
Max. relative
humidity ≤ 95%
Tstg
–45 … +85 °C
Design data
Dimensions l × w × h
Approx. weight
Impregnation
159 mm × 107 mm × 51 mm
1 kg
Resin filled
Values after Test Ca, IEC 68-2
(21 days, 40°C, 93% rel. humidity)
Terminals
Flat copper
C/C
tan 
Rins · C
Creepage distance
Clearance
100 mm
100 mm
≤ 5%
≤ 5%
≥ 1000 s
Mean life expectancy
tLD
25 000 h
300 fit
FQ
@ operating conditions:
IN = 60 A, V = 800 V
Tamb = 55 °C, THotspot = 70 °C
FK PC OH RD
Please read Cautions and warnings and
Important notes at the end of this document.
June 2009
Page 2 of 5
Film capacitors – Power electronic capacitors
PCC series
B25655J8567K***
B25655
Preliminary data
FK PC OH RD
Please read Cautions and warnings and
Important notes at the end of this document.
June 2009
Page 3 of 5
Film capacitors – Power electronic capacitors
PCC series
B25655J8567K***
B25655
Preliminary data
Cautions and warnings




In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all.
Check tightness of the connections/terminals periodically.
The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and
short-circuit the capacitor before handling.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Safety
 Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or
property damage may result from bursting of the capacitor or from expulsion of melted material
due to mechanical disruption of the capacitor.
 Ensure good, effective grounding for capacitor enclosures.
 Observe appropriate safety precautions during operation (self recharging phenomena and the
high energy stored in capacitors).
 Handle capacitors carefully, because they may still be charged even after disconnection.
 The terminals of capacitors, connected bus bars and cables as well as other devices may also be
energized.
 Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the case are
avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali,
salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals
is required to avoid conductive path between phases and/or phases and ground.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
FK PC OH RD
Please read Cautions and warnings and
Important notes at the end of this document.
June 2009
Page 4 of 5
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
Page 5 of 5
Similar pages