NEC EF2-3SNUX Ultra-low power, compact and lightweight, high breakdown voltage, surface mounting type Datasheet

DATA S H E E T
MINIATURE SIGNAL RELAY
ED2/EF2 SERIES
Ultra-low power, compact and lightweight, High breakdown voltage,
Surface mounting type
DESCRIPTION
NEC's new miniature signal relays, ED2/EF2 series, achieved 50 mW of ultra low power consumption.
FEATURES
™ Low power consumption (50 mW)
™ Applicable for the surge voltage standard of FCC (1500 V, 10 × 160 µs) and BELLCORE (2500 V, 2 × 10 µs)
™ Two types for through-hole mounting (ED2 series) and surface mounting (EF2 series)
™ Variation of dense mounting type and/or long-joint-life type for latest SMT
• Compatible configuration and terminal allocation with dense mounting type of EE2 series
• Upgraded soldering joint reliability between the relay terminal and PCB by optimization of the terminal
configuration;
20-year-joint-life under 35˚C-per-day-temperature-difference specified in IPC-SM-785 for telecommuication
equipment
APPLICATIONS
Electronic switching systems, PBX, terminal equipment, telephone system, instrumental equipment.
For Right Use of Miniature Relays
DO NOT EXCEED MAXIMUM RATINGS.
Do not use relays under exceeding conditions such as over ambient temperature, over voltage
and over current. Incorrect use could result in abnormal heating, damage to related parts or
cause burning.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC's "Miniature Relays" (ER0046EJ∗) when you choose relays
for your application.
The information in this document is subject to change without notice.
Document No. ER0304EJ2V0DS00 (2nd edition)
Date Published February 1999 M
Printed in Japan
©
1997
ED2/EF2 SERIES
DIMENSIONS AND PAD LAYOUTS (Unit : mm (inch))
0.25
(0.01)
2.54
(0.100)
5.08
(0.20)
10- φ 0.8 (0.031)
2.54
(0.100)
4 × 2.54 (0.100)
2.54(0.100)
9.4(0.37) MAX.
5.08 2.54 2.54 2.54
(0.20)(0.10)(0.10)(0.10)
3.2
(0.13)
0.5
(0.02)
Double coil latch
2 × 2.54(0.1)
8 - φ 0.8 (0.031)
7.5 (0.30) MAX.
15.0 (0.59) MAX.
2.54(0.1)
Non-latch and Single coil latch
2 × 2.54(0.100)
ED2 SERIES
5 × 2.54 (0.100)
(Bottom fiew)
Note. General tolerance : ±0.2 (±0.008)
Dimensions in
show basic size.
NJ type : Leads-2.8 mm (0.110)
Note. General tolerance : ±0.1 (±0.004)
EF2 SERIES
EF2-..
EF2-..NU
EF2-..NUX
1.0(0.039)
7.5 MAX.
(0.296)
note2
7.5 MAX.
(0.296)
15.0 MAX.
(0.591)
note2
5.08
(0.200)
B
10.35 MAX.
(0.408)
1.35
(0.053)
10.0 MAX.
(0.394)
1.0
(0.039)
A
15.0 MAX.
(0.591)
note2
5.08
(0.200)
note2
5.08
(0.200)
9.5
(0.374)
2-2.54
(2-0.100)
5.08
(0.200)
5.08
(0.2)
9.0
(0.354)
2-2.54
(2-0.100)
3-2.54
(0.100)
(Bottom view)
EF2-..NUH
EF2-..NUN
1.6
(0.063)
note2
5.08
(0.200)
2-2.54
(2-0.100)
7.5 MAX.
(0.296)
10.6 MAX.
(0.418)
15.0 MAX.
(0.591)
10.0 MAX.
(0.394)
7.5 MAX.
(0.296)
1.0
(0.039)
15.0 MAX.
(0.591)
note2
5.08
(0.200)
7.5
(0.295)
5.08
(0.200)
2-2.54
(2-0.100)
5.08
(0.200)
7.5
(0.295)
Note 1. General torelance : ± 0.2 ( ± 0.008)
Note 2. This pair of pins at the right end applies
to double coil latch type only.
2
DATA SHEET ER0304EJ2V0DS00
Type
EF2-..
EF2-..NU
EF2-..NUX
EF2-..NUH
EF2-..NUN
A
3.0 (0.118)
3.0 (0.118)
2.73 (0.107)
2.0 (0.079)
2.0 (0.079)
B
7.29 (0.287)
7.29 (0.287)
7.02 (0.276)
6.29 (0.248)
6.29 (0.248)
Note 1. General torelance : ± 0.1 ( ± 0.004)
Note 2. This pair of pads at the right end
applies to double coil latch type only.
ED2/EF2 SERIES
PIN CONFIGURATIONS (bottom view)
ED2 SERIES
1
3
4
5
1
3
4
5
1
R S
12
Index mark of
relay direction
10
9
8
4
5
6
S
12
Non-latch type
(not energized position)
3
10
9
8
R
12
Single coil latch type
(reset position)
10
9
8
7
Double coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
EF2 SERIES
1
3
4
5
1
3
4
5
1
R S
Index mark of
relay direction
12
10
9
8
4
5
6
S
12
Non-latch type
(not energized position)
3
10
9
8
R
12
Single coil latch type
(reset position)
10
9
8
7
Double coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
MARKINGS (top view)
1
1
q Part number
2
2
ED2-5
w Manufacturer
ED2-5NU
e Country of origin
r Date code
5
JAPAN
9717
JAPAN
5
9717
6
t Index mark of relay direction
(pin No. 1, 12)
3
4
3
Standard type
4
y UL, CSA Marking
UL recognized,
CSA certified type (Under application for latch type)
SAFETY STANDARD AND RATING
UL Recognized
CSA Certificated
(UL508)*
(CSA C22.2 No14)
File No E73266
File No LR46266
30 Vdc, 1 A
(Resistive)
110 Vdc, 0.3 A (Resistive)
125 Vac, 0.5 A (Resistive)
* Spacing : UL114, UL478
DATA SHEET ER0304EJ2V0DS00
3
ED2/EF2 SERIES
PERFORMANCE CHARACTERISTICS (Community)
Contact Form
Contact Ratings
2 Form c
Maximum Switching Power
30 W (resistive)
62.5 VA (resistive)
Maximum Switching Voltage
220 Vdc
250 Vac
Maximum Switching Current
1A
Maximum Carrying Current
2A
Minimum Contact Ratings
10 mV.dc, 10 µ A *4
Initial Contact Resistance
50 mΩ typ. (Initial)
Contact Material
Nominal Operating Power
Silver alloy with gold alloy overlay
Non-Latch Type
50 to 70 mW
Single Coil Latch Type
30 to 80 mW
Double Latch Type
50 to 80 mW
Operate Time (Excluding Bounce)
Approximately 3 ms
Release Time (Excluding Bounce)
Approximately 2 ms without diode
Insulation Resistance
1000 MΩ at 500 Vdc
Between Open Contacts
Breakdown Voltage
1000 Vac for one minute (1500 V surge, 10 × 160 µ s ∗1)
Between Adjacent Contacts
Between Coil and Contact
Non-latch type and single-coil latch type
1500 Vac for one minute (2500 V surge, 2 × 10 µs *2)
Double-coil latch type
1000 Vac for one minute (1500 V surge, 10 × 160 µs *1)
Shock Resistance
735 m / s2 (75 G) (misoperating)
980 m / s2 (100 G) (destructive failure)
Vibration Resistance
10 to 55 Hz at double amplitude of 3 mm (20 G)
(misoperating)
10 to 55 Hz, double amplitude of 5 mm (30 G)
(Destructive failure)
Non-latch type (Additional “N”): –40 to +85˚C
Ambient Temperature
Non-latch type (Standard): –40 to +70˚C
Latch type : –40 to +70˚C
Coil Temperature Rise
7 degrees at nominal coil voltage (50 mW)
No-load
Running specifications
Load
Weight
1 × 108 *3 operations (Non-latch type)
1 × 107 operations (Latch type)
50 Vdc 0.1 A (resistive), 1 × 106 operations at 70˚C
10 Vdc 10 mA (resistive), 1 × 106 operations at 70˚C
Approximately 2.2 grams
∗1 rise time : 10 µ s, fall time : 160 µ s
∗2 rise time : 2 µ s, fall time : 10 µ s
∗3 This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by wich
a stesdy characteristic is maintained is 1 × 107 times.
∗4 This value is a reference value in the resistive load.
Minimum capacity changes depending on seitching frequency and enviroment temperature and the load.
4
DATA SHEET ER0304EJ2V0DS00
ED2/EF2 SERIES
PART NUMBER SYSTEM
ED2 – 9 S NU
EF2 - 5 S NUH
Feature
Nil
NU
NUX
NUH
NUN
Nil : Standard type
NU : UL recognized, CSA certified type
NJ : Trimed leads
(UL recognized, CSA certified type)
Latch type
Nil : Non-latch type (Note 1)
S : Single coil latch type
T : Double coil latch type
: Standard type
: UL recognized, CSA certified type
: High solder joint reliability (20 years)
: Minimum footprint (7.5 × 15)
: High solder joint reliability with minimum footprint
Latch type
Nil : Non-latch type (Note 2)
S : Single coil latch type
T : Double coil latch type
Nominal coil voltage
1.5, 3, 4.5, 5, 6, 9, 12, 24 V
Nominal coil voltage
1.5, 3, 4.5, 5, 6, 9, 12, 24 volts
ED2 series
EF2 series
(UL, CSA : Under application for latch type)
Note 1. There are two specification in operate voltage of Non-latch type relay.
Additional “N” type
Standard type
Part Number
Must Operate Voltage
ED2-*NU
-*NJ
75%
ED2-∗
80%
∗ : Nominal coil voltage
Note 2. There are two specification in operate voltage of Non-latch type relay.
Additional “N” type
Standard type
Part Number
Must Operate Voltage
ED2-*NU
-*NUX
-*NUH
-*NUN
75%
EF2-∗
80%
∗ : Nominal coil voltage
DATA SHEET ER0304EJ2V0DS00
5
ED2/EF2 SERIES
NOMINAL LINEUP (Community)
Non-latch Type (Standard)
at 20˚C
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
Nominal
operate power
(mW)
45
1.2
0.15
50
3
180
2.4
0.3
50
4.5
405
3.6
0.45
50
5
500
4
0.5
50
6
720
4.8
0.6
50
Nominal Coil
Voltage
(Vdc)
1.5
Coil
Resistance
(Ω) ±10 %
9
1473
7.2
0.9
55
12
2400
9.6
1.2
60
24
8229
19.2
2.4
70
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
Nominal
operate power
(mW)
Non-latch Type (Additional “N”)
Nominal Coil
Voltage
(Vdc)
1.5
Coil
Resistance
(Ω) ±10 %
at 20˚C
45
1.13
0.15
50
3
180
2.25
0.3
50
4.5
405
3.38
0.45
50
5
500
3.75
0.5
50
6
720
4.5
0.6
50
9
1473
6.75
0.9
55
12
2400
9
1.2
60
24
8229
18
2.4
70
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
Nominal
operate power
(mW)
75
1.2
1.2
30
3
300
2.4
2.4
30
4.5
675
3.6
3.6
30
5
833
4
4
30
6
1200
4.8
4.8
30
Single-Coil Latch Type
Nominal Coil
Voltage
(Vdc)
1.5
6
at 20˚C
Coil
Resistance
(Ω) ±10 %
9
2700
7.2
7.2
30
12
4800
9.6
9.6
30
24
7200
19.2
19.2
80
DATA SHEET ER0304EJ2V0DS00
ED2/EF2 SERIES
Double-Coil Latch Type
at 20˚C
Nominal Coil
Voltage
(Vdc)
Coil
Resistance
(Ω) ±10 %
1.5
3
4.5
5
6
9
12
24
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
S
45
1.2
–
R
45
–
1.2
S
180
2.4
–
R
180
–
2.4
S
405
3.6
–
R
405
–
3.6
S
500
R
500
–
S
720
4.8
–
R
720
–
4.8
S
1620
7.2
–
R
1620
–
7.2
S
2880
9.6
–
R
2880
–
9.6
S
7200
R
7200
4
Nominal
operate power
(mW)
50
50
50
–
50
4
19.2
50
50
50
–
–
80
19.2
Recommended coil voltage with ambient temperature
Non latch typ
(Additional “N”)
Latch typ
150
– 40% / 45 deg
110%
100
90
95%
80
+ 20% / 65 deg
70
75%
60
50
– 40
A ratio of nominal coil voltage (%)
A ratio of nominal coil voltage (%)
150
– 40% / 30 deg
110%
100
+10% / 50 deg
90
95%
80
85%
70
60
73%
50
57%
– 40
0
20
40
60
80
– 40
Ambient temperature (˚C)
– 40
0
20
40
60
80
Ambient temperature (˚C)
DATA SHEET ER0304EJ2V0DS00
7
ED2/EF2 SERIES
TYPICAL PERFORMANCE DATA
● Coil Temperature Rise
● Breakdown Voltage
Cumulative Distribution(%)
Coil Temperature Rise(deg)
20
15
10
5
0
50
100
150
Applied Power(mW) at 20˚C
99.99
99.9
99
95
90
80
60
40
20
10
5
Between
adjacent
contacts
Between coil
and contacts
Between open
contacts
1
0.1
0.01
1
2
200
● Operate Time
3
4
5
Breakdown Voltage(KV,AC)
● Release Time without diode
2
Bounce Time at Operate
0
50
100
150
Applied Power(mW)
200
0
50
10 20 30 40 50 60 70 80 90 100
Contact Resistance(mΩ)
150
200
4
Release Time
2
Bounce Time at Release
0
50
100
150
200
Applied power(mW)
● Transfer Time
DC Load(resistive)
AC Load(resistive)
1.0
0.5
0.4
0.3
0.2
99.99
99.9
99
95
90
80
60
40
20
10
5
1
0.1
0.01
0
30
100
200
Switching Voltage(V)
8
100
● Release Time with diode
● Switching Capacity
Switching Capacity(A)
Bounce Time at Release
Applied Power(mW)
Make contact
Break contact
2.0
Release Time
1
Cumulative Distribution(%)
Cumulative Distribution(%)
1
0.1
0.01
0
2
250
● Contact Resistance
99.99
99.9
99
95
90
80
60
40
20
10
5
Release Time or
Bounce Time at Release(ms)
4
Release Time or
Bounce Time at Release(ms)
Operate Time or
Bounce Time at Operate(ms)
Operate Time
DATA SHEET ER0304EJ2V0DS00
At operate
At release
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2
Transfer Time(ms)
ED2/EF2 SERIES
40
30
20
10
0
-10
-20
-30
-40
Drift of Release Voltage(%)
Drift of Operate Voltage(%)
● Magnetic Interference (ED2 Relay)
Max.
Min.
II
I
III
IV
V
VI
40
30
20
10
0
-10
-20
-30
-40
Max.
Min.
II
I
III
OFF
ON
ON
Layout
I
Layout
II
Layout
III
ON
OFF
ON
OFF
ON
OFF
VI
OFF
OFF
Layout
IV
Mounting Layout mm(inch)
Sample
Layout V
V
2.54 (0.1)
OFF
ON
,
, ,
,
,
,
ON
IV
Layout
Layout
Layout VI
● Mechanical Life
at 70˚C, 50 operation/sec
Operate Voltage
Release Voltage
Operate Voltage or
Release Voltage(V)
4
3
2
1
0
1
1000
Contact Resistance(mΩ)
5
2
3
4
10
5
Number of Operations(x10 operations)
500
at 70˚C, 50 operations/sec
Make contact
Break contact
300
200
100
50
30
20
10
0
DATA SHEET ER0304EJ2V0DS00
1
2
3
5
10
5
Number of Operations(x10 operations)
9
ED2/EF2 SERIES
TUBE PACKAGE (ED2, EF2)
Dimension of Package (Unit : mm)
35 pieces / Tube
Material : Polyvinyl chloride
(anti-static treated)
543 ± 1
15.5 ± 0.3
(0.5 t)
(4.8)
11.9 ± 0.3
(2.4)
( ) Reference
Outline of Package
Rubber stopper (Red)
Rubber stopper (Green)
Index Mark
TAPE PACKAGE (EF2)
Embossed carrying tape
φ 1.5
(0.054)
16.0(0.63)
4.0(0.157)
0.4
(0.016)
φ 2.2
(0.087)
15.5
(0.610)
2.0(0.079)
Top cover tape
A
11.5
(0.453)
24.0(0.945)
Reel
TAPE DIMENSION mm (inch)
1.75(0.069)
APPEARANCE
B
A
EF2-∗∗
Max.10.9
EF2-∗∗NU
(0.429)
EF2-∗∗NUX
EF2-∗∗NUH Max.11.1
EF2-∗∗NUN (0.437)
Relay orientation mark and tape carrying direction.
Orientation mark
Orientation mark
Tape carrying direction
Carrying tape type
Part number
10
L
EF2-***-L
DATA SHEET ER0304EJ2V0DS00
R
EF2-****-R
B
10.0
(0.394)
8.0
(0.315)
ED2/EF2 SERIES
SOLDERING TEMPERATURE CONDITION
Through–hole mounting type (ED2)
q Automatic soldering
* Preheating
: 100°C max. 1 minute max.
* Solder temperature : 250°C max.
* Solder time
: 10 seconds max.
w Manual soldering
* Solder temperature : 350°C max.
* Solder time
: 3 seconds max.
Surface mounting type (EF2)
IRS Method
T max.; 235
Temperature (˚C)
200
175
150
30 sec.
80 sec.
200 sec.
Time
VPS Method
Temperature (˚C)
T max.; 215
200 max.
165 max.
100 max.
Time
60 sec. max.
60 sec.
90 sec. max.
Note:
1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion.
2. Check the actual soldering condition to use other method except above mentioned temperature profiles.
DATA SHEET ER0304EJ2V0DS00
11
ED2/EF2 SERIES
GUIDE TO APPLICATIONS
1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction.
2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should
be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state.
3. Ultrasonic cleaning is not recommended to keep contact performance reliable. Alcohol based solvents are
available as proper solvents.
4. Pressurized stress on the relay cover may affect reliable operation.
5. Minimum contact load of the relay is 10 mVdc, 10 µ A.
This value is a reference value in the resistance load.
Minimum capacity changes depending on switching frequency and environment temperature and the load.
12
DATA SHEET ER0304EJ2V0DS00
ED2/EF2 SERIES
DATA SHEET ER0304EJ2V0DS00
13
ED2/EF2 SERIES
14
DATA SHEET ER0304EJ2V0DS00
ED2/EF2 SERIES
DATA SHEET ER0304EJ2V0DS00
15
ED2/EF2 SERIES
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which
may appear in this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other
liability arising from use of such device. No license, either express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its electronic
components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or
injury to persons or property arising from a defect in an NEC electronic component, customers must
incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and antifailure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based
on a customer designated "quality assurance program" for a specific application. The recommended
applications of a device depend on its quality grade, as indicated below. Customers must check the
quality grade of each device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
Similar pages