Kingbright AP1608SF4C 1.6x0.8mm infra-red emitting diode Datasheet

1.6x0.8mm INFRA-RED EMITTING DIODE
AP1608SF4C
Features
Description
1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.
MECHANICALLY AND SPECTRALLY MATCHED TO
SF4 Made with Gallium Aluminum Arsenide Infrared
Emitting diodes.
AP1608 PHOTOTRANSISTOR.
W ATER CLEAR LENS.
PACKAGE: 2000PCS / REEL .
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAA8462
REV NO: V.6
DATE: MAR/14/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: B.H.LI
ERP: 1203000062
Selection Guide
Part No.
AP1608SF4C
Dice
Po (mW/sr)
@ 20mA
Lens Type
SF4 (GaAlAs)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
0.4
1
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Parameter
P/N
Symbol
Typ.
Max.
Units
Test Conditions
Forward Voltage
SF4
VF
1.3
1.6
V
IF=20mA
Reverse Current
SF4
IR
-
10
uA
VR=5V
Capacitance
SF4
C
90
-
pF
VF=0V;f=1MHz
Peak Spectral Wavelength
SF4
λP
880
-
nm
IF=20mA
Spectral Bandwidth
SF4
∆λ1/2
50
-
nm
IF=20mA
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
SF4
Units
Power Dissipation
PT
100
mW
DC Forward Current
IF
50
mA
Peak Forward Current[1]
iFS
1.2
A
Reverse Voltage
VR
5
V
Operating Temperature
TA
-40 To +85
°C
TSTG
-40 To +85
°C
Storage Temperature
Note:
1. 1/100 Duty Cycle, 10us Pulse Width.
SPEC NO: DSAA8462
REV NO: V.6
DATE: MAR/14/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: B.H.LI
ERP: 1203000062
AP1608SF4C
SPEC NO: DSAA8462
REV NO: V.6
DATE: MAR/14/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: B.H.LI
ERP: 1203000062
AP1608SF4C
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
If special sorting is required (e.g. binning based on forward voltage or radiant intensity),
the typical accuracy of the sorting process isas follows:
1. Radiant Intensity: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA8462
REV NO: V.6
DATE: MAR/14/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: B.H.LI
ERP: 1203000062
Similar pages