CREE CXA1510-0000-000N00H227F Xlamp led Datasheet

Cree® XLamp® CXA1510 LED
Product Description
features
The XLamp® CXA1510 LED array
•
Table of Contents
Available in 4-step, 3‑step and 2-step
Characteristics.............................................2
expands Cree’s family of high‑flux,
EasyWhite bins at 2700 K, 3000 K,
Operating Limits...........................................3
multi‑die arrays in a smaller, easy‑to‑use
3500 K, 4000 K & 5000 K CCT and
Flux Characteristics, EasyWhite® Order
platform. With XLamp LED lighting‑class
4-step EasyWhite bins at 5700 K &
Codes and Bins - 18 V..................................4
reliability,
6500 K CCT
Flux Characteristics, ANSI White Order
the
CXA1510’s
®
small,
Available in ANSI white bins at
Codes and Bins - 18 V..................................8
directional and non‑directional lighting
4000 K, 5000 K, 5700 K & 6500 K
Flux Characteristics, EasyWhite® Order
applications including lamp retrofit and
CCT
Codes and Bins - 36 V..................................9
Available in 70-, 80-, 90- and
Flux Characteristics, ANSI White Order
93‑minimum CRI options
Codes and Bins - 36 V............................... 13
Forward voltage options: 18‑V class
Relative Spectral Power Distribution....... 14
& 36‑V class
Electrical Characteristics.......................... 15
•
85 °C binning and characterization
Relative Luminous Flux............................. 16
•
Maximum drive current: 900 mA
Typical Spatial Distribution....................... 18
(18 V), 450 mA (36 V)
Performance Groups - Brightness........... 18
115° viewing angle, uniform
Performance Groups - Chromaticity........ 19
chromaticity profile
Cree EasyWhite® Bins Plotted on the
•
Top-side solder connections
1931 CIE Color Space .............................. 22
•
Thermocouple attach point
Cree ANSI White Bins Plotted on the
•
NEMA SSL-3 2011 standard flux bins
1931 CIE Color Space............................... 22
•
RoHS compliant
Bin and Order Code Formats.................... 23
•
UL recognized component
Mechanical Dimensions........................... 23
(E349212)
Thermal Design......................................... 24
uniform emitting surface enables both
luminaire designs. Available in 2‑step,
•
•
3‑step and 4‑step color consistency,
and featuring a 9‑mm optical source,
•
the CXA1510 brings new levels of flux
and efficacy to this form factor.
The CX LED Design Guide provides
basic information on the requirements
•
to use the CXA1510 LED successfully in
luminaire designs.
®
CLD-DS106 Rev 3E
Product family data sheet
www.cree.com/Xlamp
Notes......................................................... 26
Packaging.................................................. 27
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® CXA1510 LED
Characteristics
Characteristics
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
*
Unit
degrees
Minimum
Typical
Maximum
115
V
8000
DC forward current (18 V)
mA
900*
DC forward current (36 V)
mA
450*
Reverse current (18 V, 36V)
mA
0.1
Forward voltage (18 V, 500 mA, 85 °C)
V
Forward voltage (18 V, 500 mA, 25 °C)
V
Forward voltage (36 V, 250 mA, 85 °C)
V
Forward voltage (36 V, 250 mA, 25 °C)
V
17.5
21
35
42
Refer to the Operating Limits section.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® CXA1510 LED
Operating Limits
The maximum current rating of the CXA1510 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium
under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal
interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions
CXA1510 - 18 V
section on page 23 for the location of the Tc measurement point.
1000
800
If (mA)
600
18 V
400
200
0
0
25
50
75
100
125
150
Case Temperature (°C)
CXA1510 - 36 V
500
400
If (mA)
300
36 V
200
100
0
0
25
50
75
100
125
150
Case Temperature (°C)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI
Min
70
Minimum Luminous Flux
Typ
75
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000000F00J465F
H4
970
1076
CXA1510-0000000F0HH465F
J2
1040
1154
J4
1120
1243
CXA1510-0000000F0HJ465F
H4
970
1076
CXA1510-0000000F00H457F
J2
1040
1154
J4
1120
1243
CXA1510-0000000F00J457F
H4
970
1076
CXA1510-0000000F0HH457F
J2
1040
1154
J4
1120
1243
CXA1510-0000000F0HJ457F
G2
780
866
CXA1510-0000000F0UG257F
G4
840
932
H2
900
999
Group
Order Code
Group
Order Code
Group
CXA1510-0000000F00H465F
65F
6500 K
80
70
5700 K
80
90
---
75
---
95
Order Code
65F
57F
57F
57F
CXA1510-0000000F00J265F
CXA1510-0000000F0HJ265F
CXA1510-0000000F00J257F
CXA1510-0000000F0HJ257F
CXA1510-0000000F0UG457F
CXA1510-0000000F0UH257F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
70
5000 K
80
90
70
4000 K
80
90
Minimum Luminous Flux
Typ
75
---
95
75
---
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000000F00J450H
H4
970
1076
CXA1510-0000000F0HH450H
J2
1040
1154
J4
1120
1243
CXA1510-0000000F0HJ450H
CXA1510-0000000F0HJ450G
CXA1510-0000000F0HJ450F
G2
780
866
CXA1510-0000000F0UG250H
CXA1510-0000000F0UG250G
CXA1510-0000000F0UG250F
G4
840
932
H2
900
999
CXA1510-0000000F0UH250H
H4
970
1076
CXA1510-0000000F00H440H
J2
1040
1154
J4
1120
1243
CXA1510-0000000F00J440H
H4
970
1076
CXA1510-0000000F0HH440H
J2
1040
1154
J4
1120
1243
CXA1510-0000000F0HJ440H
CXA1510-0000000F0HJ440G
CXA1510-0000000F0HJ440F
G2
780
866
CXA1510-0000000F0UG240H
CXA1510-0000000F0UG240G
CXA1510-0000000F0UG240F
G4
840
932
H2
900
999
Group
Order Code
Group
Order Code
Group
CXA1510-0000000F00H450H
50H
50H
50H
40H
40H
40H
CXA1510-0000000F00H450F
CXA1510-0000000F00J250H
CXA1510-0000000F0HJ250H
CXA1510-0000000F0UG450H
50F
CXA1510-0000000F0UG440H
CXA1510-0000000F0UH240H
CXA1510-0000000F00J250F
CXA1510-0000000F00J450F
CXA1510-0000000F0HH450G
50G
50G
CXA1510-0000000F0HJ250G
CXA1510-0000000F0UG450G
CXA1510-0000000F0HH450F
50H
50F
CXA1510-0000000F0UH250G
CXA1510-0000000F0HJ250F
CXA1510-0000000F0UG450F
CXA1510-0000000F0UH250F
CXA1510-0000000F00H440F
CXA1510-0000000F00J240H
CXA1510-0000000F0HJ240H
Order Code
40F
CXA1510-0000000F00J240F
CXA1510-0000000F00J440F
CXA1510-0000000F0HH440G
40G
40G
CXA1510-0000000F0HJ240G
CXA1510-0000000F0UG440G
CXA1510-0000000F0UH240G
CXA1510-0000000F0HH440F
40F
40F
CXA1510-0000000F0HJ240F
CXA1510-0000000F0UG440F
CXA1510-0000000F0UH240F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
80
3500 K
90
93
80
3000 K
90
93
Minimum Luminous Flux
Typ
---
95
95
---
95
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H2
900
999
H4
970
1076
J2
1040
1154
CXA1510-0000000F00J235H
CXA1510-0000000F00J235G
CXA1510-0000000F00J235F
F2
680
755
CXA1510-0000000F0UF235H
CXA1510-0000000F0UF235G
CXA1510-0000000F0UF235F
F4
730
810
G2
780
866
CXA1510-0000000F0UG235H
CXA1510-0000000F0UG235G
CXA1510-0000000F0UG235F
F2
680
755
CXA1510-0000000F0YF235H
CXA1510-0000000F0YF235G
CXA1510-0000000F0YF235F
F4
730
810
G2
780
866
CXA1510-0000000F0YG235H
CXA1510-0000000F0YG235G
CXA1510-0000000F0YG235F
H2
900
999
CXA1510-0000000F00H230H
CXA1510-0000000F00H230G
CXA1510-0000000F00H230F
H4
970
1076
J2
1040
1154
CXA1510-0000000F00J230H
CXA1510-0000000F00J230G
CXA1510-0000000F00J230F
F2
680
755
CXA1510-0000000F0UF230H
CXA1510-0000000F0UF230G
CXA1510-0000000F0UF230F
F4
730
810
G2
780
866
CXA1510-0000000F0UG230H
CXA1510-0000000F0UG230G
CXA1510-0000000F0UG230F
F2
680
755
CXA1510-0000000F0YF230H
CXA1510-0000000F0YF230G
CXA1510-0000000F0YF230F
F4
730
810
G2
780
866
Group
Order Code
Group
CXA1510-0000000F00H235H
35H
35H
35H
30H
30H
30H
CXA1510-0000000F00H435H
CXA1510-0000000F0UF435H
CXA1510-0000000F0YF435H
CXA1510-0000000F00H430H
CXA1510-0000000F0UF430H
CXA1510-0000000F0YF430H
CXA1510-0000000F0YG230H
Order Code
Group
CXA1510-0000000F00H235G
35G
35G
35G
30G
30G
30G
CXA1510-0000000F00H435G
CXA1510-0000000F0UF435G
CXA1510-0000000F0YF435G
CXA1510-0000000F00H430G
CXA1510-0000000F0UF430G
CXA1510-0000000F0YF430G
CXA1510-0000000F0YG230G
Order Code
CXA1510-0000000F00H235F
35F
35F
35F
30F
30F
30F
CXA1510-0000000F00H435F
CXA1510-0000000F0UF435F
CXA1510-0000000F0YF435F
CXA1510-0000000F00H430F
CXA1510-0000000F0UF430F
CXA1510-0000000F0YF430F
CXA1510-0000000F0YG230F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
80
2700 K
90
93
Minimum Luminous Flux
Typ
---
95
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
G4
840
932
H2
900
999
H4
970
1076
CXA1510-0000000F00H427H
CXA1510-0000000F00H427G
CXA1510-0000000F00H427F
E4
635
707
CXA1510-0000000F0UE427H
CXA1510-0000000F0UE427G
CXA1510-0000000F0UE427F
F2
680
755
F4
730
810
CXA1510-0000000F0UF427H
CXA1510-0000000F0UF427G
CXA1510-0000000F0UF427F
E4
635
707
CXA1510-0000000F0YE427H
CXA1510-0000000F0YE427G
CXA1510-0000000F0YE427F
F2
680
755
F4
730
810
Group
Order Code
Group
CXA1510-0000000F00G427H
27H
27H
27H
CXA1510-0000000F00H227H
CXA1510-0000000F0UF227H
CXA1510-0000000F0YF227H
CXA1510-0000000F0YF427H
Order Code
Group
CXA1510-0000000F00G427G
27G
27G
27G
CXA1510-0000000F00H227G
CXA1510-0000000F0UF227G
CXA1510-0000000F0YF227G
CXA1510-0000000F0YF227G
Order Code
CXA1510-0000000F00G427F
27F
27F
27F
CXA1510-0000000F00H227F
CXA1510-0000000F0UF227F
CXA1510-0000000F0YF227F
CXA1510-0000000F0YF427F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® CXA1510 LED
Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI
Min
70
Minimum Luminous Flux
Typ
75
6500 K
80
70
5700 K
80
90
70
---
75
---
95
75
5000 K
80
4000 K
70
---
75
Chromaticity Regions
Order Code
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F00J40E1
H4
970
1076
CXA1510-0000-000F0HH40E1
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F0HJ40E1
H4
970
1076
CXA1510-0000-000F00H40E2
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F00J40E2
H4
970
1076
CXA1510-0000-000F0HH40E2
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F0HJ40E2
G2
780
866
CXA1510-0000-000F0UG20E2
G4
840
932
CXA1510-0000-000F00H40E1
1A0, 1B0, 1C0, 1D0, 65F
1A0, 1B0, 1C0, 1D0, 65F
2A0, 2B0, 2C0, 2D0, 57F
2A0, 2B0, 2C0, 2D0, 57F
2A0, 2B0, 2C0, 1D0, 57F
CXA1510-0000-000F00J20E1
CXA1510-0000-000F0HJ20E1
CXA1510-0000-000F00J20E2
CXA1510-0000-000F0HJ20E2
CXA1510-0000-000F0UG40E2
H2
900
999
CXA1510-0000-000F0UH20E2
H4
970
1076
CXA1510-0000-000F00H40E3
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F00J40E3
H4
970
1076
CXA1510-0000-000F0HH40E3
J2
1040
1154
J4
1120
1243
CXA1510-0000-000F0HJ40E3
H4
970
1076
CXA1510-0000-000F00H40E5
J2
1040
1154
J4
1120
1243
3A0, 3B0, 3C0, 3D0, 50F
3A0, 3B0, 3C0, 3D0, 50F
5A0, 5B0, 5C0, 5D0, 40F
CXA1510-0000-000F00J20E3
CXA1510-0000-000F0HJ20E3
CXA1510-0000-000F00J20E5
CXA1510-0000-000F00J40E5
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI
Min
70
Minimum Luminous Flux
Typ
75
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000000N00J465F
H4
970
1076
CXA1510-0000000N0HH465F
J2
1040
1154
J4
1120
1243
CXA1510-0000000N0HJ465F
H4
970
1076
CXA1510-0000000N00H457F
J2
1040
1154
J4
1120
1243
CXA1510-0000000N00J457F
H4
970
1076
CXA1510-0000000N0HH457F
J2
1040
1154
J4
1120
1243
CXA1510-0000000N0HJ457F
G2
780
866
CXA1510-0000000N0UG257F
G4
840
932
H2
900
999
Group
Order Code
Group
Order Code
Group
CXA1510-0000000N00H465F
65F
6500 K
80
70
5700 K
80
90
---
75
---
95
Order Code
65F
57F
57F
57F
CXA1510-0000000N00J265F
CXA1510-0000000N0HJ265F
CXA1510-0000000N00J257F
CXA1510-0000000N0HJ257F
CXA1510-0000000N0UG457F
CXA1510-0000000N0UH257F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
70
5000 K
80
90
70
4000 K
80
90
Minimum Luminous Flux
Typ
75
---
95
75
---
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000000N00J450H
H4
970
1076
CXA1510-0000000N0HH450H
J2
1040
1154
J4
1120
1243
CXA1510-0000000N0HJ450H
CXA1510-0000000N0HJ450G
CXA1510-0000000N0HJ450F
G2
780
866
CXA1510-0000000N0UG250H
CXA1510-0000000N0UG250G
CXA1510-0000000N0UG250F
G4
840
932
H2
900
999
CXA1510-0000000N0UH250H
H4
970
1076
CXA1510-0000000N00H440H
J2
1040
1154
J4
1120
1243
CXA1510-0000000N00J440H
H4
970
1076
CXA1510-0000000N0HH440H
J2
1040
1154
J4
1120
1243
CXA1510-0000000N0HJ440H
CXA1510-0000000N0HJ440G
CXA1510-0000000N0HJ440F
G2
780
866
CXA1510-0000000N0UG240H
CXA1510-0000000N0UG240G
CXA1510-0000000N0UG240F
G4
840
932
H2
900
999
Group
Order Code
Group
Order Code
Group
CXA1510-0000000N00H450H
50H
50H
50H
40H
40H
40H
CXA1510-0000000N00H450F
CXA1510-0000000N00J250H
CXA1510-0000000N0HJ250H
CXA1510-0000000N0UG450H
50F
CXA1510-0000000N0UG440H
CXA1510-0000000N0UH240H
CXA1510-0000000N00J250F
CXA1510-0000000N00J450F
CXA1510-0000000N0HH450G
50G
50G
CXA1510-0000000N0HJ250G
CXA1510-0000000N0UG450G
CXA1510-0000000N0HH450F
50H
50F
CXA1510-0000000N0UH250G
CXA1510-0000000N0HJ250F
CXA1510-0000000N0UG450F
CXA1510-0000000N0UH250F
CXA1510-0000000N00H440F
CXA1510-0000000N00J240H
CXA1510-0000000N0HJ240H
Order Code
40F
CXA1510-0000000N00J240F
CXA1510-0000000N00J440F
CXA1510-0000000N0HH440G
40G
40G
CXA1510-0000000N0HJ240G
CXA1510-0000000N0UG440G
CXA1510-0000000N0UH240G
CXA1510-0000000N0HH440F
40F
40F
CXA1510-0000000N0HJ240F
CXA1510-0000000N0UG440F
CXA1510-0000000N0UH240F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
80
3500 K
90
93
80
3000 K
90
93
Minimum Luminous Flux
Typ
---
95
95
---
95
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H2
900
999
H4
970
1076
J2
1040
1154
CXA1510-0000000N00J235H
CXA1510-0000000N00J235G
CXA1510-0000000N00J235F
F2
680
755
CXA1510-0000000N0UF235H
CXA1510-0000000N0UF235G
CXA1510-0000000N0UF235F
F4
730
810
G2
780
866
CXA1510-0000000N0UG235H
CXA1510-0000000N0UG235G
CXA1510-0000000N0UG235F
F2
680
755
CXA1510-0000000N0YF235H
CXA1510-0000000N0YF235G
CXA1510-0000000N0YF235F
F4
730
810
G2
780
866
CXA1510-0000000N0YG235H
CXA1510-0000000N0YG235G
CXA1510-0000000N0YG235F
H2
900
999
CXA1510-0000000N00H230H
CXA1510-0000000N00H230G
CXA1510-0000000N00H230F
H4
970
1076
J2
1040
1154
CXA1510-0000000N00J230H
CXA1510-0000000N00J230G
CXA1510-0000000N00J230F
F2
680
755
CXA1510-0000000N0UF230H
CXA1510-0000000N0UF230G
CXA1510-0000000N0UF230F
F4
730
810
G2
780
866
CXA1510-0000000N0UG230H
CXA1510-0000000N0UG230G
CXA1510-0000000N0UG230F
F2
680
755
CXA1510-0000000N0YF230H
CXA1510-0000000N0YF230G
CXA1510-0000000N0YF230F
F4
730
810
G2
780
866
Group
Order Code
Group
CXA1510-0000000N00H235H
35H
35H
35H
30H
30H
30H
CXA1510-0000000N00H435H
CXA1510-0000000N0UF435H
CXA1510-0000000N0YF435H
CXA1510-0000000N00H430H
CXA1510-0000000N0UF430H
CXA1510-0000000N0YF430H
CXA1510-0000000N0YG230H
Order Code
Group
CXA1510-0000000N00H235G
35G
35G
35G
30G
30G
30G
CXA1510-0000000N00H435G
CXA1510-0000000N0UF435G
CXA1510-0000000N0YF435G
CXA1510-0000000N00H430G
CXA1510-0000000N0UF430G
CXA1510-0000000N0YF430G
CXA1510-0000000N0YG230G
Order Code
CXA1510-0000000N00H235F
35F
35F
35F
30F
30F
30F
CXA1510-0000000N00H435F
CXA1510-0000000N0UF435F
CXA1510-0000000N0YF435F
CXA1510-0000000N00H430F
CXA1510-0000000N0UF430F
CXA1510-0000000N0YF430F
CXA1510-0000000N0YG230F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® CXA1510 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued
Nominal
CCT
CRI
Min
80
2700 K
90
93
Minimum Luminous Flux
Typ
---
95
95
2-Step
3-Step
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
G4
840
932
H2
900
999
H4
970
1076
CXA1510-0000000N00H427H
CXA1510-0000000N00H427G
CXA1510-0000000N00H427F
E4
635
707
CXA1510-0000000N0UE427H
CXA1510-0000000N0UE427G
CXA1510-0000000N0UE427F
F2
680
755
F4
730
810
CXA1510-0000000N0UF427H
CXA1510-0000000N0UF427G
CXA1510-0000000N0UF427F
E4
635
707
CXA1510-0000000N0YE427H
CXA1510-0000000N0YE427G
CXA1510-0000000N0YE427F
F2
680
755
F4
730
810
Group
Order Code
Group
CXA1510-0000000N00G427H
27H
27H
27H
CXA1510-0000000N00H227H
CXA1510-0000000N0UF227H
CXA1510-0000000N0YF227H
CXA1510-0000000N0YF427H
Order Code
Group
CXA1510-0000000N00G427G
27G
27G
27G
CXA1510-0000000N00H227G
CXA1510-0000000N0UF227G
CXA1510-0000000N0YF227G
CXA1510-0000000N0YF227G
Order Code
CXA1510-0000000N00G427F
27F
27F
27F
CXA1510-0000000N00H227F
CXA1510-0000000N0UF227F
CXA1510-0000000N0YF227F
CXA1510-0000000N0YF427F
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® CXA1510 LED
Flux Characteristics, ANSI White Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI
Min
70
Minimum Luminous Flux
Typ
75
6500 K
80
70
5700 K
80
90
70
---
75
---
95
75
5000 K
80
4000 K
70
---
75
Chromaticity Regions
Order Code
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H4
970
1076
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N00J40E1
H4
970
1076
CXA1510-0000-000N0HH40E1
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N0HJ40E1
H4
970
1076
CXA1510-0000-000N00H40E2
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N00J40E2
H4
970
1076
CXA1510-0000-000N0HH40E2
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N0HJ40E2
G2
780
866
CXA1510-0000-000N0UG20E2
G4
840
932
CXA1510-0000-000N00H40E1
1A0, 1B0, 1C0, 1D0, 65F
1A0, 1B0, 1C0, 1D0, 65F
2A0, 2B0, 2C0, 2D0, 57F
2A0, 2B0, 2C0, 2D0, 57F
2A0, 2B0, 2C0, 1D0, 57F
CXA1510-0000-000N00J20E1
CXA1510-0000-000N0HJ20E1
CXA1510-0000-000N00J20E2
CXA1510-0000-000N0HJ20E2
CXA1510-0000-000N0UG40E2
H2
900
999
CXA1510-0000-000N0UH20E2
H4
970
1076
CXA1510-0000-000N00H40E3
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N00J40E3
H4
970
1076
CXA1510-0000-000N0HH40E3
J2
1040
1154
J4
1120
1243
CXA1510-0000-000N0HJ40E3
H4
970
1076
CXA1510-0000-000N00H40E5
J2
1040
1154
J4
1120
1243
3A0, 3B0, 3C0, 3D0, 50F
3A0, 3B0, 3C0, 3D0, 50F
5A0, 5B0, 5C0, 5D0, 40F
CXA1510-0000-000N00J20E3
CXA1510-0000-000N0HJ20E3
CXA1510-0000-000N00J20E5
CXA1510-0000-000N00J40E5
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
•
Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® CXA1510 LED
Relative Spectral Power Distribution
Relative Spectral Power Distribution
The following graph is the result of a series of pulsed measurements at 500 mA for the 18-V CXA1510 LED and 250 mA for the 36-V
CXA1510 LED and TJ = 85 °C.
100%
Relative Spectral Power
90%
80%
70%
60%
5000 K, 70 CRI
50%
4000 K, 70 CRI
40%
3000 K, 80 CRI
30%
3000 K, 93 CRI
20%
10%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® CXA1510 LED
Electrical Characteristics
The following graphs are the result of a series of steady-state measurements.
19.5
19.0
18 V
Voltage (V)
18.5
18.0
Tc = 25 °C
Tc = 55 °C
17.5
Tc = 85 °C
17.0
Tc = 105 °C
16.5
16.0
15.5
200
300
400
500
600
700
800
900
Current (mA)
39
38
36 V
Voltage (V)
37
Tc = 25 °C
36
Tc = 55 °C
35
Tc = 85 °C
34
Tc = 105 °C
33
32
31
100
150
200
250
300
350
400
450
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® CXA1510 LED
Relative Luminous Flux
The relative luminous flux values provided below are the ratio of:
•
Measurements of CXA1510 at steady-state operation at the given conditions, divided by
•
Flux measured during binning, which is a pulsed measurement at 500 mA at TJ = 85 °C.
Using the 18-V CXA1510 LED as an example, at steady-state operation of Tc = 55 °C, IF = 600 mA, the relative luminous flux ratio is 120%
in the chart below. A CXA1510 LED that measures 1120 lm during binning will deliver 1344 lm (1120 * 1.2) at steady-state operation of
Tc = 55 °C, IF = 600 mA.
180%
Relative Luminous Flux
160%
18 V
140%
120%
Tc = 25 °C
100%
Tc = 55 °C
80%
Tc = 85 °C
Tc = 105 °C
60%
40%
20%
0%
200
300
400
500
600
700
800
900
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® CXA1510 LED
Relative Luminous Flux - Continued
The relative luminous flux values provided below are the ratio of:
•
Measurements of CXA1510 at steady-state operation at the given conditions, divided by
•
Flux measured during binning, which is a pulsed measurement at 250 mA at TJ = 85 °C.
Using the 36-V CXA1510 LED as an example,or example, at steady-state operation of Tc = 55 °C, IF = 300 mA, the relative luminous flux
ratio is 120% in the chart below. A CXA1510 LED that measures 1120 lm during binning will deliver 1344 lm (1120 * 1.2) at steady-state
operation of Tc = 55 °C, IF = 300 mA.
180%
Relative Luminous Flux
160%
36 V
140%
120%
Tc = 25 °C
100%
Tc = 55 °C
80%
Tc = 85 °C
Tc = 105 °C
60%
40%
20%
0%
100
150
200
250
300
350
400
450
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® CXA1510 LED
Far Field
Typical Spatial Distribution
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Performance Groups - Brightness (18 V, If = 500 ma; 36 V, If = 250 ma, Tj = 85 °C)
XLamp CXA1510 LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
E4
635
680
F2
680
730
F4
730
780
G2
780
840
G4
840
900
H2
900
970
H4
970
1040
J2
1040
1120
J4
1120
1200
K2
1200
1290
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® CXA1510 LED
Performance Groups - Chromaticity (Tj = 85 °C)
XLamp CXA1510 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code
50H
40H
35H
30H
27H
CCT
5000 K
4000 K
3500 K
3000 K
2700 K
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3469
0.3539
0.3784
0.3741
0.3804
0.3818
0.3867
0.3857
0.3844
0.3778
0.4030
0.3857
0.4061
0.3941
0.4132
0.3976
0.4099
0.3890
0.4291
0.3973
0.4333
0.4062
0.4395
0.4084
0.4351
0.3994
0.4528
0.4046
0.4578
0.4138
0.4638
0.4152
0.4586
0.4060
EasyWhite Color Temperatures – 3-Step Ellipse
Major Axis
Minor Axis
x
y
a
b
Rotation Angle
(°)
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
40G
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
54.0
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Bin Code
CCT
50G
Center Point
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® CXA1510 LED
Performance Groups - Chromaticity (Tj = 85 °C) - Continued
EasyWhite Color Temperatures – 4-Step
Code
65F
57F
50F
40F
35F
30F
27F
CCT
6500 K
5700 K
5000 K
4000 K
3500 K
3000 K
2700 K
x
y
0.3097
0.3196
0.3079
0.3297
0.3164
0.3382
0.3176
0.3275
0.3253
0.3325
0.3249
0.3439
0.3331
0.3514
0.3330
0.3393
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484
0.3521
0.3744
0.3685
0.3782
0.3837
0.3912
0.3917
0.3863
0.3758
0.3981
0.3800
0.4040
0.3966
0.4186
0.4037
0.4116
0.3865
0.4242
0.3919
0.4322
0.4096
0.4449
0.4141
0.4359
0.3960
0.4475
0.3994
0.4573
0.4178
0.4695
0.4207
0.4589
0.4021
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® CXA1510 LED
Performance Groups - Chromaticity (Tj = 85 °C) - Continued
ANSI White Bins
Code
Bin
Code
CCT
1A0
1B0
0E1
6500 K
1C0
1D0
ANSI White Bins
x
y
0.3048
0.3130
0.3144
0.3186
Code
x
y
0.3207
0.3215
0.3350
0.3290
0.3290
0.3417
0.3290
0.3300
2A0
0.3068
0.3113
0.3222
0.3243
0.3028
0.3304
0.3207
0.3462
0.3115
0.3391
0.3290
0.3538
0.3130
0.3290
0.3290
0.3417
0.3048
0.3207
0.3215
0.3350
0.3115
0.3391
0.3290
0.3538
0.3205
0.3481
0.3376
0.3616
0.3213
0.3373
0.3371
0.3490
0.3130
0.3290
0.3290
0.3417
0.3130
0.3290
0.3290
0.3417
0.3213
0.3373
0.3371
0.3490
0.3221
0.3261
0.3366
0.3369
0.3144
0.3186
0.3290
0.3300
2B0
0E2
5700 K
2C0
2D0
ANSI White Bins
Code
CCT
Bin
Code
3A0
3B0
0E3
5000 K
3C0
3D0
Bin
Code
CCT
ANSI White Bins
x
y
Code
CCT
Bin
Code
x
y
.3371
.3490
.3670
.3578
.3451
.3554
.3702
.3722
.3440
.3427
.3825
.3798
.3366
.3369
.3783
.3646
.3376
.3616
.3702
.3722
.3463
.3687
.3736
.3874
.3451
.3554
.3869
.3958
.3371
.3490
.3825
.3798
.3463
.3687
.3825
.3798
.3551
.3760
.3869
.3958
.3533
.3620
.4006
.4044
.3451
.3554
.3950
.3875
.3451
.3554
.3783
.3646
.3533
.3620
.3825
.3798
.3515
.3487
.3950
.3875
.3440
.3427
.3898
.3716
5A0
5B0
0E5
4000 K
5C0
5D0
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® CXA1510 LED
Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.44
2700 K
ANSI C78.377 Quadrangle
0.43
3000 K
EasyWhite 4-Step
EasyWhite 3-Step
0.42
EasyWhite 2-Step
3500 K
0.41
4000 K
0.40
4500 K
CCy
0.39
5000 K
0.38
0.37
5700 K
0.36
6500 K
0.35
0.34
0.33
0.32
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.31
CCx
Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.41
4000 K
ANSI C78.377 Quadrangle
0.40
4500 K
5C
0.39
5D
0.37
CCy
5B
5000 K
0.38
5700 K
0.36
5A
3C
3B
6500 K
0.35
2B
0.34
1C
1B
0.33
3D
2C
1D
3A
2D
2A
1A
0.32
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.31
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® CXA1510 LED
Bin and Order Code Formats
Bin codes and order codes are configured as follows:
Order CodeBin Code
Series = CXA15
Series = CXA15
Internal code
Chromaticity bin
CRI Specification
0 = Standard CRI
H = 80 min CRI
U = 90 min CRI
Y = 93 min CRI
Vf class
F0 = 18-V class
N0 = 36-V class
SSSSSCC-HHHH-HHHGGRNNNNN
Internal code
SSSSSCC-WWW-FF-GGR-AAAAA
CRI Specification
B = 70 min CRI
H = 80 min CRI
U = 90 min CRI
Y = 93 min CRI
Kit code
Vf class
F0 = 18-V class
N0 = 36-V class
Flux bin
Performance class
Performance class
Mechanical Dimensions
Dimensions are in mm.
Tolerances unless otherwise
specified: +.13
x° +1°
1510F = 18‑V CXA1510
1510N = 36‑V CXA1510
1510X
Meaning of 1510X
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® CXA1510 LED
Thermal Design
The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction
temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum
TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to
ensure the CXA LED is being operated within its designed limits. Please refer to page 3 for the Operating Limit specification.
There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to
ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please
refer to the Thermal Management application note. For CXA soldering recommendations and more information on thermal interface
materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX
Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXA LEDs successfully in luminaire designs.
To keep the CXA1510 LED at or below the maximum rated Tc, the case to ambient temperature
thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following
R_j-c
R_j-c
scale.
Tc
Tc
As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim)
R_tim
graphs, depending on the operating environment. The y‑axis in the graphs is a base 10 logarithmic
R_c-a
plus the thermal resistance of the heat sink (R_hs).
R_hs
CXA1510 - 18 V
Ta
Ta
100.00
18 V
Maximum R_c-a
10.00
Ta = 25 °C
Ta = 55 °C
1.00
Ta = 85 °C
Ta = 105 °C
0.10
0.01
200
300
400
500
600
700
800
900
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® CXA1510 LED
CXA1510
- 36- V
Thermal
Design
Continued
100.00
36 V
Maximum R_c-a
10.00
Ta = 25 °C
Ta = 55 °C
1.00
Ta = 85 °C
Ta = 105 °C
0.10
0.01
100
150
200
250
300
350
400
450
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® CXA1510 LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® CXA1510 LED
Packaging
6
Cree CXA1510 LEDs are packaged
in trays of 20. Five trays are4 sealed in an anti-static bag and
placed inside a carton, for a total
of 100
5
3
2
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
NOTICE
ENTIAL. THIS PLOT AND THE INFORMATION
WITHIN ARE THE PROPRIETARY AND
AL INFORMATION OF CREE, INC. THIS PLOT
COPIED, REPRODUCED OR DISCLOSED TO ANY
ED PERSON WITHOUT
THE WRITTEN CONSENT
Dimensions are in inches.
Tolerances: +.13
x° +1°
5.875
4
5
6
3
5
2
R .375
4
1
3
2
1
NOTICE
ENTIAL. THIS PLOT AND THE INFORMATION
WITHIN ARE THE PROPRIETARY AND
L INFORMATION OF CREE, INC. THIS PLOT
COPIED, REPRODUCED OR DISCLOSED TO ANY
NSENT
ED PERSON WITHOUT
THE WRITTEN CONSENT
5.875
.875
5.875
R .375
R .375
5.875
.875
.875
5.875
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
PATENT
LABEL
ISBIN
LOCATED
LABEL WITH
CREE
CODE,
QUANTITY, OF
LOTCARTON
#
ON
UNDERSIDE
TH CREE BIN
ANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE .875
OF COVER
BAG
.38
.875
BAG
.38
.875
BAG
.38
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
L IS LOCATED
IDE OF COVER
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
THIRD ANGLE PROJECTION
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
THIRD ANGLE PROJECTION
6
5
6
WITH CREE
BIN
QUANTITY, LOT #
5
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
THIRD ANGLE PROJECTION
3.X
±
.XX
±
.XXX ±
X°
±
UNLESS OTHERWISE
SPECIFIED
3
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
®
®
notice.
Cree
, XLamp
TOLERANCE
UNLESS
SPECIFIED:and
.X
±
.XX
±
.XXX ±
X°
±
0.1
.05
.005
1 °
DATE
0.1
.05
.005
1 °
FOR SHEET METAL PARTS ONLY
.X
±
.06
0.1
.05
.005
1 °
.06
.03
.010
2 °
DRAWN BY
DATE
DATE
APPROVED
DATE
DATE
FOR SHEET METAL
PARTS ONLYDATE
APPROVED
.X
±
.06
.XX
±
.03
MATERIAL
.XXX ±
.010
X°
±
2 °
FOR SHEET METAL PARTS ONLY
.X
±
.XX
±
.XXX ±
X°
±
4
4
.X
±
DRAWN BY
.XX
±
.XXX ±
CHECK ±
X°
DRAWN BY
CHECK
TITLE
CXA15
Phone (919) 361-
Fax (919) 313-530
SIZE
C
CXA15XX_DATASHEET
TITLE
SCALE
SIZE
SCALE
C
2
DATE
APPROVED
DATE
CXA15XX_DATASHEET_BAG2013
0.500
SHEET
OF
1 Drive
4600 Silicon
Durham, N.C 27703
EasyWhite® are registered trademarks and the Cree logo is a
Phone (919) 361-4770
Fax (919) 313-5303
TITLE
CXA15XX_DATASHEET
27
MATERIAL
SIZE
FINAL PROTECTIVE FINISH
CXA
0.500
DRAWING NO.
2
CHECK
DRAW
FINAL PROTECTIVE FINISH
FINAL PROTECTIVE FINISH
DATE
4600 Silicon Drive
Durham, N.C 277
MATERIAL
DRAWING NO.
CXA15XX_DATASHEET_BAG2013
Similar pages