Coilcraft C1062-BL Pfc coil Datasheet

Document 444-1
PFC Coils
For ON Semiconductor NCP1653
Power Factor Controller
These coils were developed specifically for use with the
ON Semiconductor NCP1653 Power Factor Controller
(PFC) for driving continuous conduction mode step-up
pre-converters.
The C1061-A operates in 150 Watt applications. The
C1062-B operates in 300 Watt applications and is specified by ON Semiconductor in application note AND8185/D.
In addition to the standard parts shown, Coilcraft can
design custom magnetics with inductance, DCR and
current values to meet your specific requirements. For
more information, contact Coilcraft.
To request free evaluation samples of these coils,
contact Coilcraft or visit www.coilcraft.com.
Part
number
Application
Inductance1
±10% (µH)
Inductance
at Ipk min (µH)
Ipk
(A)
DCR max2
(Ohms)
SRF
(MHz)
Irms3
(A)
C1061-AL
C1062-BL
150 W
300 W
450
570
405
540
4.5
6.0
0.166
0.226
1.4
1.0
3.80
3.55
1. Inductance measured at 100 kHz, 0.1 V, 0 Adc using an Agilent/
HP 4284A impedance analyzer.
2. DCR measured on Cambridge Technology micro-ohmmeter and
Coilcraft CCF858 test fixture.
3. Average current for a 40°C rise above 25°C ambient.
4. Operating temperature range −40°C to +125°C.
5. Electrical specifications at 25°C.
Typical Inductance vs Frequency
1000
800
Typical Inductance vs Current
1000
800
C1062-BL
C1061-AL
Inductance (µH)
Inductance (µH)
600
400
300
200
100
600
500
C1062-BL
400
C1061-AL
300
200
100
0.01
0.1
1
10
0.1
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
10
1
100
Current (A)
Frequency (MHz)
Document 444-1
Revised 01/05/09
Document 444-2
PFC Coils for ON Semiconductor NCP1653
Typical Temperature Rise vs Current
60
C1
06
2-B
L
C1
06
1AL
Temperature rise (from 25°C)
70
50
40
30
20
10
0
0
1
2
3
4
5
Current (A rms)
C1061-AL
C1062-BL
1
1
1.450
max
36,80
1.50
max
38,10
7
6
1.210
max
30,73
1.170
max
29,70
0.150 ±0.030
3,81 ±0,76
0.0346 ±0.0005
0,879 ±0,013
0.875
22,20
0.029
0,74
1.00
25,40
0.115 ±0.015
3,30 ±0,33
1.20
30,48
6
7
7
1.450
max
36,80
1.80
max
45,72
1
0.058
Ø
1,47
12
1
0.875
22,20
0.200
5,08
1
1.00
25,40
0.062
Ø
1,58
0.150
3,81
0.200
5,08
1
Recommended
PC Layout
Weight: 64.5 g
Packaging: 75 per tray
Weight: 105.7 g
Packaging: 50 per tray
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Recommended
PC Layout
Document 444-2
Revised 01/05/09
Similar pages