Gamewell-FCI DH-GB1 Electromagnetic door holder Datasheet

DH Series
Features
• Very low current draw.
Electromagnetic Door Holders
• Superior holding force and low residual
magnetisms.
• Durable die-cast metal.
g2282ph1.jpg
• High lustre double chrome or brass plating.
Description
• Dual-voltage AC or DC inputs.
Gamewell’s DH Series of electromagnetic fire door holders are
constructed of durable die-cast
metal finished in high-lustre double
chrome or brass plating.
• Terminal block connections.
Other features inclued standard
dual-voltage AC and DC inputs of
24 and 120 volts (standard), as well
as 12 and 24 volts and at 24 and
220 volts models. While reducing
stocking requiements, the 24 and
120 volts model draws only 0.020
mA at 24 VDC, lowering overall job
costs.
Other features include single or
double-coil floor mounting, surface
mounting and direct wall mounting. No brackets are required.
The DH Series door holders offer installation using an adhesive template
assuring alignment without secondary adjustments. Accessories include
extension and misalignment rods (various lengths) for correct alignment
between door and wall at distances greater than 12.0" (30.48 cm) and
misalignment over 4.0" (10.16 cm).
The aircraft-quality DH drill fixture reduces installation time and provides
a near-perfect alignment of catch-plate and armature.
Basic units offer superior holding force and low residual magnetism.
Models working at 12 and 24 volts and at 24 and 120 volts can operate at
higher listed voltages, producing holdng forces in excess of 100 pounds
(45.3 kg) for special applications.
Standard Application
Gamewell’s electromagnetic DH Series door holders are designed to hold
self-closing swinging doors open until energized by a remote sensing device
responding to smoke, heat, or flames, alarm systems, or a switch. When
de-energized, the door holder releases the door, enabling it to swing closed
to check the spread of smoke, heat, or flames. The door holder can also be
used in other remote door-closing applications as well.
The units are recommended for automatic area protection against smoke,
heat, or flames in schools, hospitals, nursing homes, offices, and other
public buildings of all kinds. Gamewell’s DH Series of electromagnetic
door holders are specially engineered for easy connection to dectectors,
sensors, alarm systems, and annunciators.
DH Series
CS-2482
09/01/06
Page 1 of 2
• Single-or double-coil floor, furface, and
direct mounting (no brackets required).
• Aircraft-quality DH drill fixture available to
reduce installation time and costs.
• Extension and misalignment rods.
Listings
Listings and approvals below apply to the
DH Series Electromagnetic Door Holders. In
some cases, certain modules may not be
listed by certain approval agencies, or listing
may be in process. Consult factory for
latest listing status.
• UL Listed:
Electrical/Mechanical Specifications
V olta g e
D C /m A
A C /m A
T e r m i n a ls
LB.
KG.
12 V
0 .0 4 0
0 .0 3 8
C o m m o n & L o w V o lta g e
30
1 3 .6
24 V
0 .0 4 0
0 .0 3 6
C o m m o n & H ig h V o l t a g e
30
1 3 .6
24 V
0 .0 2 0
0 .0 1 9
C o m m o n & L o w V o lta g e
40
1 8 .1
12 V
—
0 .0 2 0
C o m m o n & H ig h V o l t a g e
35
1 5 .8
24 V
0 .0 2 0
0 .0 1 9
C o m m o n & L o w V o lta g e
40
1 8 .1
220 V
—
0 .0 1 5
C o m m o n & H ig h V o l t a g e
25
1 1 .3
24 V
0 .0 8 5
0 .0 8 1
C o m m o n & L o w V o lta g e
75
3 4 .0
120 V
—
0 .1 0 0
C o m m o n & L o w V o lta g e
110
4 9 .8
N O T E : H o ld i n g f o r c e s li s t e n in a b o v e t a b l e c o r r e s p o n d w it h s h a d e d v a l u e s ;
n o n - s h a d e d v a lu e s a r e s li g h t ly l e s s .
H IG H H O L D IN G F O R C E /S P E C IA L A P P L IC A T IO N S :
T o o b t a i n p e r f o r m a n c e v a l u e s i n t a lb e a b o v e , a p p ly h ig h v o lt a g e t o l o w
v o l t a g e t e r m i n a ls (C & L ) . T h is c o n f i g u r a t io n c a n o n l y b e a p p l ie d t o 1 2 & 2 4
v o l t s a n d 2 4 & 1 2 0 v o lt s m o d e l s .
Ordering Information
Door holders:
DH-FC1
Door holder, semi-flush, chrome.
DH-FB1
Door holder, semi-flush, brass.
DH-SC1
Door holder, surface mount, chrome.
DH-SB1
Door holder, surface mount, brass.
DH-GC1
Door holder, ground mount, single-door, chrome.
DH-GB1
Door holder, ground mount, single-door, brass.
DH-GC2
Door holder, ground mount, double-door, chrome.
DH-GB2
Door holder, ground mount, double-door brass.
Extensions:
Accessories:
DHE1C
1" (2.54 cm) Extensions rod, chrome.
DHCP
Catch plate, chrome.
DHE1B
1" (2.54 cm) Extension rod, brass.
DHCPB
Catch plate, brass.
DHE15C
1" (2.54 cm) Extension rod, chrome.
DHSBC
Swivel base, chrome.
DHE15B
1" (2.54 cm) Extension rod, brass.
DHSBB
Swivel base, brass.
DHE2C
2" (5.08 cm) Extension rod, chrome.
DHBBC
Back box, chrome.
DHE2B
2" (5.08 cm) Extension rod, brass.
DHBBB
Back box, brass.
DHE3C
3" (7.62 cm) Extension rod, chrome.
DHW
Extension wrench. (2 pieces)
DHE3B
3" (7.62 cm) Extension rod, brass.
DHDF
DHE4AC
4" (10.16 cm) Adjustable extension rod, chrome.
Swivel base mounting drill
fixture.
DHE4AB
4" (10.16 cm) Adjustable extension rod, brass.
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell-FCI.
Page 2 of 2
DH Series
CS-2482
09/01/06
Similar pages