Coilcraft AE612PNB473MSZ Outgassing compliant power inductor Datasheet

1278 POWER INDUCTORS
Outgassing Compliant Power Inductors AE612PNB
■ High current, low DCR shielded power inductors
■ Passes NASA low outgassing specifications
■ High temperature materials allow operation in ambient
temperatures up to 165°C.
■ Tin-lead (Sn-Pb) terminations for the best possible board
adhesion
Core material Ferrite
Terminations Tin-lead (63/37) over tin over nickel over phos bronze.
Weight: 3.8 g – 4.6 g
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 500/13″ reel;
Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing,
8.1 mm pocket depth
DCR
Inductance2 (mOhms)
Part number1
(µH)
typ max
AE612PNB102NSZ 1.0 ±30%
6.3
7.0
AE612PNB142NSZ 1.4 ±30%
8.8
9.8
AE612PNB222NSZ 2.2 ±30%
9.4 10.5
AE612PNB272NSZ 2.7 ±30% 10.1 11.3
AE612PNB392NSZ 3.9 ±30% 11.7 13.0
AE612PNB472MSZ 4.7 ±20% 13.9 15.5
AE612PNB562MSZ 5.6 ±20% 15.7 17.5
AE612PNB682MSZ 6.8 ±20% 19.1 21.3
AE612PNB822MSZ 8.2 ±20% 20.3 22.6
AE612PNB103MSZ 10 ±20%
21.8 24.3
AE612PNB123MSZ 12 ±20%
23.2 25.8
AE612PNB153MSZ 15 ±20%
27.9 31.0
AE612PNB183MSZ 18 ±20%
30.8 34.3
AE612PNB223MSZ 22 ±20%
35.5 39.5
AE612PNB273MSZ 27 ±20%
45.0 50.0
AE612PNB333MSZ 33 ±20%
61.9 68.8
AE612PNB393MSZ 39 ±20%
69.1 76.8
AE612PNB473MSZ 47 ±20%
72.3 80.4
AE612PNB563MSZ 56 ±20%
80.2 89.2
AE612PNB683MSZ 68 ±20%
91.3 101.5
AE612PNB823MSZ 82 ±20%
125.9 139.9
AE612PNB104MSZ 100 ±20% 135.1 150.2
AE612PNB124KSZ 120 ±10% 182.3 202.6
AE612PNB154KSZ 150 ±10% 216.5 240.6
AE612PNB184KSZ 180 ±10% 229.0 254.5
AE612PNB224KSZ 220 ±10% 323.6 359.6
AE612PNB274KSZ 270 ±10% 415.6 461.8
AE612PNB334KSZ 330 ±10% 487.3 541.5
AE612PNB394KSZ 390 ±10% 533.6 592.9
AE612PNB474KSZ 470 ±10% 707.5 786.2
AE612PNB564KSZ 560 ±10% 777.4 863.8
AE612PNB684KSZ 680 ±10% 1045 1162
AE612PNB824KSZ 820 ±10% 1166 1296
AE612PNB105KSZ 1000 ±10% 1334 1482
3
®
SRF4
Isat (A)5 Irms (A)6 1. When ordering, please specify testing code:
(MHz)
10% 20% 30% 20°C 40°C
AE612PNB105KSZ
min typ
drop drop drop rise rise
Testing: Z = COTS
80 115
31.84 35.04 36.84 7.1 10.1
H = Screening per Coilcraft
60
85
25.04 27.76 29.52 6.8 9.8
CP‑SA‑10001
42
60
22.56 24.80 25.96 6.3 9.2
N = Screening per Coilcraft
28
40
18.76 20.72 22.04 6.1 8.6
CP‑SA‑10004
25
35
16.52 18.24 19.20 5.7 7.7 2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
23
33
15.30 16.90 17.76 4.3 6.2
meter or equivalent.
21
30
13.38 14.86 15.74 4.3 6.2
16
23
12.10 13.56 14.20 4.2 6.0 3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
14
20
11.38 12.60 13.28 4.1 5.9
12
17
10.62 11.82 12.48 4.0 5.7 4. SRF measured using an Agilent/HP 8753D
network analyzer.
11
15
8.90 9.88 10.44 3.7 5.2
5. Typical DC current at which the inductance
9.0 13
8.36 9.32 9.94 3.5 4.9
drops the specified amount from its value
8.4 12
8.00 8.88 9.36 3.0 4.5
without current.
7.7 11
7.08 7.88 8.34 2.9 4.0 6. Typical current that causes the specified
7.0 10
6.32 7.08 7.54 2.6 3.6
temperature rise from 25°C ambient.
6.6
9.5
5.96 6.56 6.98 2.3 3.1 7. Electrical specifications at 25°C.
6.0
8.5
5.38 5.94 6.28 2.1 3.0 Refer to Doc 362 “Soldering Surface Mount
5.3
7.5
4.76 5.40 5.66 2.0 2.9 Components” before soldering.
4.9
7.0
4.40 4.98 5.30 1.9 2.7
4.6
6.5
3.92 4.46 4.74 1.8 2.6
3.5
5.0
3.66 4.08 4.38 1.6 2.3
3.1
4.5
3.12 3.56 3.78 1.5 2.2
3.0
4.3
3.02 3.36 3.58 1.4 1.9
2.9
4.1
2.60 2.94 3.10 1.3 1.8
2.8
4.0
2.36 2.68 2.84 1.2 1.7
2.4
3.4
2.24 2.50 2.62 1.0 1.6
2.2
3.1
1.94 2.18 2.34 0.90 1.2
2.0
2.9
1.72 1.92 2.06 0.80 1.0
1.9
2.7
1.62 1.82 1.92 0.75 1.0
1.6
2.2
1.44 1.64 1.74 0.66 0.90
1.4
2.0
1.40 1.54 1.66 0.60 0.80
1.2
1.7
1.24 1.32 1.46 0.55 0.75
1.0
1.4
1.14 1.28 1.42 0.50 0.70
0.90 1.3
0.982 1.08 1.18 0.48 0.68
Specifications subject to change without notice.
Please check our website for latest information.
Document AE598-1 Revised 07/26/11
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
Phone 800-981-0363
Fax 847-639-1508
E-mail [email protected]
Web www.coilcraft-cps.com
1278 POWER INDUCTORS
AE612PNB Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
100 µH
100
10 µH
10
1 µH
1
0.1
0.01
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1 µH
1
1
0.1
10
0.1
0.1
10
1
100
Current (A)
Frequency (MHz)
Current Derating
120
100
90
80
70
60
50
40
25°C
Percent of rated Current
110
30
20
10
0
-55 -40
Isat
Irms
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
Dimensions are in
®
Specifications subject to change without notice.
Please check our website for latest information.
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
inches
mm
Document AE598-2
Phone 800-981-0363
Fax 847-639-1508
Revised 07/26/11
E-mail [email protected]
Web www.coilcraft-cps.com
Similar pages