Ecliptek EC1445SJTS-25.000MTR Oscillator Datasheet

Marketing Bulletin
DATE:
September 20th, 2006
TO:
All Sales Personnel
FROM:
Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective September 20th, 2006:
Series
EC14
Description
5V 4 pad SMD Plastic Oscillator
Recommended Replacement
EP14 or EH14
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after March 31st, 2007, with
delivery to conclude by September 30th 2007.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Vice President of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EC14 Series
EC14
• Plastic surface mount package
• 5.0V supply voltage
• HCMOS/TTL output
• Stability to ±50ppm
• Available on tape and reel
H 4.7
L 14.0
W 9.8
OSCILLATOR
OBSOLETE
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
1.000MHz to 66.667MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C (<30.000MHz)
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
Frequency Tolerance / Stability*
Input Current
Load Drive Capability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Duty Cycle
Rise Time / Fall Time
5.0VDC ±10%
Inclusive of Operating Temperature Range,
±100ppm Maximum or
Supply Voltage, and Load
±50ppm Maximum (0°C to 70°C Only)
<30.000MHz
23mA Maximum (Unloaded)
30.001MHz to 50.000MHz
35mA Maximum (Unloaded)
>50.000MHz
50mA Maximum (Unloaded)
<53.125MHz
10TTL Load or 50pF HCMOS Load
>53.125MHz
15pF HCMOS Load
w/TTL Load
2.4VDC Minimum
IOH = -16mA
w/HCMOS Load
VDD-0.5VDC Minimum
IOH = -16mA
w/TTL Load
0.4VDC Maximum
IOL = +16mA
w/HCMOS Load
0.5VDC Maximum
IOL = +16mA
at 50% of waveform w/HCMOS Load at 1.4VDC w/TTL Load
50 ±10(%) (Standard)
at 1.4VDC w/HCMOS Load or w/TTL Load
50 ±5(%) (Optional)
20% to 80% of waveform w/HCMOS Load;
8 nSeconds Maximum
0.4VDC to 2.4VDC w/TTL Load
Aging (at 25°C)
±5ppm / year Maximum
Tri-State Input Voltage
Start Up Time
No Connection
Enables Output
VIH :≥2.0VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
1.000MHz to 26.000MHz
4 mSeconds Maximum
26.001MHz to 66.667MHz
10 mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EC14
PLASTIC
5.0V
OS33
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
08/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC14 00 SJ ET T TS - 25.000M TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum
PACKAGING OPTIONS
Blank=Bulk
TR=Tape and Reel (Standard)
OPERATING TEMP. RANGE
Blank=0°C to 70°C
ET=-40°C to 85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State Enable High
DUTY CYCLE
Blank=50 ±10(%) (Standard)
T=50 ±5(%)
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Tolerances = ±0.1
Pin 3: Output
Pin 4: Supply Voltage
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
24 ±.3
11.5 ±.1
10.75 ±.1
4 ±.2
2±.1
F
G
H
J
12 ±.2
B0*
1.5 +.1-0
A0*
K
.3 ±.1
L
K0*
M
N
1.5 MIN
50 MIN
REEL
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
R
S
T
2.5 MIN
10 MIN
30.4 MAX
O
20.2 MIN
U
360 MAX
P
Q
13±.2
40 MIN
V
24.4+2-0
QTY/REEL
1,000
MARKING SPECIFICATIONS
Characteristic
Specification
Line 1: ECLIPTEK
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum (internal crystal only).
Line 2: XX.XXX M
Solderability
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Vibration
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC14
PLASTIC
5.0V
OS33
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages