Intersil EL5130IS-T13 300mhz low noise amplifier Datasheet

EL5130, EL5131
®
Data Sheet
June 6, 2006
300MHz Low Noise Amplifiers
Features
The EL5130 and EL5131 are ultra-low voltage noise, high
speed voltage feedback amplifiers that are ideal for
applications requiring low voltage noise, including
communications and imaging. These devices offer extremely
low power consumption for exceptional noise performance.
Stable at gains as low as 5, these devices offer 100mA of
drive performance. Not only do these devices find perfect
application in high gain applications, they maintain their
performance down to lower gain settings.
• 300MHz -3dB bandwidth
These amplifiers are available in small package options
(SOT-23) as well as the industry-standard SO packages. All
parts are specified for operation over the -40°C to +85°C
temperature range.
Ordering Information
PART
PART NUMBER MARKING
FN7381.3
• Ultra low noise = 1.8nV/√Hz
• 350V/µs slew rate
• Low supply current = 4mA
• Single supplies from 5V to 12V
• Dual supplies from ±2.5V to ±6V
• Fast disable on the EL5130
• Low cost
• Pb-free plus anneal available (RoHS compliant)
Applications
• Imaging
TAPE &
REEL
PACKAGE
PKG.
DWG. #
EL5130IS
5130IS
-
8 Ld SO
MDP0027
EL5130ISZ
(See Note)
5130ISZ
-
8 Ld SO
(Pb-free)
MDP0027
EL5130IS-T7
5130IS
7”
8 Ld SO
MDP0027
EL5130ISZ-T7
(See Note)
5130ISZ
7”
8 Ld SO
(Pb-free)
MDP0027
EL5130IS-T13
5130IS
13”
8 Ld SO
MDP0027
EL5130ISZ-T13
(See Note)
5130ISZ
13”
8 Ld SO
(Pb-free)
MDP0027
EL5131IW-T7
BBAA
7”
(3k pcs)
5 Ld SOT-23 MDP0038
EL5131IWZ-T7
(See Note)
BRAA
7”
(3k pcs)
5 Ld SOT-23 MDP0038
(Pb-free)
EL5131IW-T7A
BBAA
7”
5 Ld SOT-23 MDP0038
(250 pcs)
EL5131IWZ-T7A BRAA
(See Note)
7”
5 Ld SOT-23 MDP0038
(250 pcs) (Pb-free)
• Instrumentation
• Communications devices
Pinouts
EL5130
(8 LD SO)
TOP VIEW
NC 1
IN- 2
IN+ 3
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
8 CE
+
VS- 4
7 VS+
6 OUT
5 NC
EL5131
(5 LD SOT-23)
TOP VIEW
OUT 1
VS- 2
IN+ 3
5 VS+
+ 4 IN-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2004, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
EL5130, EL5131
Absolute Maximum Ratings (TA = 25°C)
Slewrate between VS+ and VS-. . . . . . . . . . . . . . . . . . . . . . . . 1V/µs
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . 13.2V
IIN-, IIN+, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications
PARAMETER
VS+ = +5V, VS- = -5V, RL = 500Ω, RG = 50Ω, CL = 5pF, TA = 25°C, unless otherwise specified.
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
-0.9
0.2
0.9
mV
VOS
Offset Voltage
TCVOS
Offset Voltage Temperature Coefficient
Measured from TMIN to TMAX
IB
Input Bias Current
VIN = 0V
1.5
2.27
3.3
µA
IOS
Input Offset Current
VIN = 0V
-500
100
500
nA
TCIOS
Input Bias Current Temperature
Coefficient
Measured from TMIN to TMAX
PSRR
Power Supply Rejection Ratio
VS = ±4.75V to ±5.25V
CMRR
Common Mode Rejection Ratio
CMIR
0.8
µV/°C
-3
nA/°C
75
90
dB
VIN = ±3.0V
95
110
dB
Common Mode Input Range
Guaranteed by CMRR test
±3
±3.3
V
RIN
Input Resistance
Common mode
5
20
MΩ
CIN
Input Capacitance
1
pF
IS
Supply Current
AVOL
Open Loop Gain
VO
Output Voltage Swing
3.0
3.54
4.1
mA
VOUT = ±2.5V, RL = 1kΩ to GND
10
16
kV/V
RL = 1kΩ, RF = 900Ω, RG = 100Ω
±3.5
±3.8
V
RL = 150Ω
±3.5
±3.3
V
50
100
mA
ISC
Short Circuit Current
RL = 10Ω
BW
-3dB Bandwidth
AV = +5, RL = 500Ω
300
MHz
BW
±0.1dB Bandwidth
AV = +5, RL = 500Ω
60
MHz
GBWP
Gain Bandwidth Product
1500
MHz
PM
Phase Margin
RL = 1kΩ, CL = 6pF
55
°
SR
Slew Rate
VS = ±5V, RL = 150Ω, VOUT = ±2.5V
350
V/µs
tR, tF
Rise Time, Fall Time
±0.1VSTEP
TBD
ns
tPD
Propagation Delay
±0.1VSTEP
TBD
ns
tS
0.01% Settling Time
14
ns
dG
Differential Gain
AV = +2, RF = 1kΩ
0.01
%
dP
Differential Phase
AV = +2, RF = 1kΩ
0.01
°
eN
Input Noise Voltage
f = 10kHz
1.8
nV/√Hz
iN
Input Noise Current
f = 10kHz
1.1
pA/√Hz
2
225
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
0
50
144
216
30
288
10
-10
1k
PHASE
10k
100k
1M
10M
NORMALIZED GAIN (dB)
72
PHASE (°)
MAGNITUDE (dB)
70
300
5
VS=±5V
360
100M 500M
180
3
1
-60
-1
VS=±5V
AV=-5
-3 RG=50Ω
RL=500Ω
CL=5pF
-5
0.1
1
FREQUENCY (Hz)
-300
1k
100
5
180
GAIN
60
-60
-1
PHASE
-180
NORMALIZED GAIN (dB)
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
CL=5pF
PHASE (°)
NORMALIZED GAIN (dB)
10
FIGURE 2. GAIN AND PHASE vs FREQUENCY (INVERTING)
300
5
-3
-180
FREQUENCY (MHz)
FIGURE 1. OPEN LOOP GAIN AND PHASE vs FREQUENCY
1
60
GAIN
PHASE (°)
90
VS=±5V
RG=50Ω
3 RL=500Ω
CL=5pF
1
AV=+5
-1
AV=+10
-3
AV=+20
-5
0.1
1
10
-300
1k
100
-5
0.1
1
FREQUENCY (MHz)
VS=±5V
AV=+5
3 RG=50Ω
CL=5pF
NORMALIZED GAIN (dB)
5
VS=±5V
RG=50Ω
180 RL=500Ω
CL=5pF
60
-60
AV=+5
AV=+10
-180
1
RL=1kΩ
-1
RL=500Ω
RL=150Ω
-3
AV=+20
1
10
100
RL=100Ω
1k
FREQUENCY (MHz)
FIGURE 5. PHASE vs FREQUENCY FOR VARIOUS AV+
3
1k
FIGURE 4. GAIN vs FREQUENCY FOR VARIOUS AV+
300
-300
0.1
100
FREQUENCY (MHz)
FIGURE 3. GAIN AND PHASE vs FREQUENCY
(NON-INVERTING)
NORMALIZED GAIN (dB)
10
-5
0.1
1
10
100
1k
FREQUENCY (MHz)
FIGURE 6. GAIN vs FREQUENCY FOR VARIOUS RL (AV=+5)
FN7381.3
June 6, 2006
EL5130, EL5131
5
5
VS=±5V
AV=+10
3 RG=50Ω
CL=5pF
VS=±5V
AV=+5
3 RL=500Ω
CL=5pF
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
Typical Performance Curves
1
-1
RL=1kΩ
RL=500Ω
-3
RL=150Ω
RF=1kΩ
RF=500Ω
1
-1
RF=200Ω
-3
RF=100Ω
RL=100Ω
-5
0.1
1
10
100
-5
0.1
1k
1
FREQUENCY (MHz)
5
VS=±5V
AV=+10
3 RL=500Ω
CL=5pF
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
1k
FIGURE 8. GAIN vs FREQUENCY FOR VARIOUS RF (AV=+5)
5
1
RF=2.25kΩ
RF=1.125kΩ
RF=450Ω
-3
100
FREQUENCY (MHz)
FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS RL (AV=+10)
-1
10
CL=22pF
CL=15pF
1
CL=10pF
-1
CL=6pF
-3
RF=225Ω
-5
0.1
1
10
100
-5
0.1
1k
1
FREQUENCY (MHz)
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
CL=5pF
CL=47pF
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
5
VS=±5V
AV=+10
3 RG=50Ω
RL=500Ω
CL=33pF
1
CL=22pF
CL=12pF
-3
1
10
100
1k
FREQUENCY (MHz)
FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS CL (AV=+10)
4
1k
FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS CL (AV=+5)
5
-5
0.1
100
FREQUENCY (MHz)
FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS RF (AV=+10)
-1
10
CIN=8.2pF
CIN=4.7pF
1
CIN=2.7pF
-1
CIN=1pF
-3
-5
0.1
1
10
100
1k
FREQUENCY (MHz)
FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS CIN- (AV=+5)
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
5
VS=±5V
AV=+10
3 RG=50Ω
RL=500Ω
CL=5pF
CIN=25pF
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
5
CIN=18pF
1
CIN=15pF
-1
CIN=10pF
-3
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
CL=5pF
VS=±6
1
VS=±2.5
-1
VS=±3
VS=±4
-3
VS=±5
-5
0.1
1
10
100
-5
0.1
1k
FREQUENCY (MHz)
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
CL=5pF
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
5
VS=±5V
AV=+10
3 RG=50Ω
RL=500Ω
VS=±6
VS=±2.5
VS=±3
-3
100
1k
FIGURE 14. GAIN vs FREQUENCY FOR VARIOUS ±VS (AV=+5)
5
-1
10
FREQUENCY (MHz)
FIGURE 13. GAIN vs FREQUENCY FOR VARIOUS CIN(AV=+10)
1
1
VS=±4
1
-1
-3dB @
360MHz
-3
VS=±5
-5
0.1
1
10
100
-5
1k
1
FREQUENCY (MHz)
100
1k
FREQUENCY (MHz)
FIGURE 15. GAIN vs FREQUENCY FOR VARIOUS VS± (AV=+10)
FIGURE 16. FREQUENCY RESPONSE (-3dB ROLL-OFF)
0.5
-40
VS=±5V
AV=+5
0.3 RG=50Ω
RL=500Ω
CL=5pF
VS=±5V
AV=+5
-60 RG=50Ω
RL=500Ω
GAIN (dB)
NORMALIZED GAIN (dB)
10
0.1
-0.1
-80
-100
-0.1dB @
230MHz
-0.3
-0.5
-120
1
10
100
1k
FREQUENCY (MHz)
FIGURE 17. FREQUENCY RESPONSE (0.1dB GAIN FLATNESS)
5
-140
0.1
1
10
100
FREQUENCY (MHz)
FIGURE 18. INPUT AND OUTPUT ISOLATION FOR DISABLE
AMPLIFIER
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
10
-10
-10
VS+
-30
VS-
VS=±5V
AV=+5
-30 RL=150Ω
CMRR (dB)
PSRR (dB)
AV=+10
VS=±5V
-50
VS-
-70
-50
-70
-90
VS+
-90
1k
10k
100k
1M
10M
-110
0.01
100M 500M
0.1
FREQUENCY (Hz)
1k
FIGURE 20. CMRR vs FREQUENCY
10
VOLTAGE NOISE (nV/√Hz)
5
4
GROUP DELAY (ns)
100
10
FREQUENCY (MHz)
FIGURE 19. PSRR vs FREQUENCY
3
2
1
0
1
1
10
100
1
10
1k
100
FREQUENCY (MHz)
1k
10k
100k
FREQUENCY (Hz)
FIGURE 21. GROUP DELAY vs FREQUENCY
FIGURE 22. INPUT VOLTAGE NOISE
HARMONIC DISTORITON (dBc)
CURRENT NOISE (pA/√Hz)
-30
10
1
10
100
1k
10k
FREQUENCY (Hz)
FIGURE 23. INPUT CURRENT NOISE
6
100k
VS=±5V
AV=+5
-40 RG=50Ω
RL=500Ω
CL=5pF
VOUT=2VP-P
-50
THD
2ND HD
-60
3RD HD
-70
-80
0.5
1
10
20
FUNDAMENTAL FREQUENCY (MHz)
FIGURE 24. HARMONIC DISTORITON vs FREQUENCY (AV=+5)
FN7381.3
June 6, 2006
EL5130, EL5131
-30
-30
VS=±5V
AV=+10
-40 RG=50Ω
RL=500Ω
-50 CL=5pF
VOUT=2VP-P
VS=±5V
AV=+5
-40 RG=50Ω
RL=500Ω
-50 CL=5pF
THD
THD (dBc)
HARMONIC DISTORITON (dBc)
Typical Performance Curves
2ND HD
-60
-70
THD
FIN=5MHz
-60
-70
3RD HD
-80
THD
FIN=1MHz
-80
-90
0.5
1
10
-90
20
0
1
2
3
4
5
6
7
OUTPUT VOLTAGE (VP-P)
FUNDAMENTAL FREQUENCY (MHz)
FIGURE 25. HARMONIC DISTORTION vs FREQUENCY
(AV=+10)
FIGURE 26. THD vs OUTPUT VOLTAGE (WORST HARMONIC)
100
5
OUTPUT SWING GAIN (dB)
AV=+5
VS=±5V
OUTPUT IMPEDANCE (Ω)
THD
FIN=10MHz
10
1
0.1
VS=±5V
AV=+5
3 RG=50Ω
RL=500Ω
CL=5pF
VOUT=0.5VP-P
VOUT=1VP-P
1
-1
VOUT=2VP-P
VOUT=4VP-P
-3
VOUT=6VP-P
0.01
10k
100k
1M
10M
-5
0.1
100M
1
150
150
100
100
RISE TIME
4ns
0
-50
INPUT
40mVP-P
VS=±5V
AV=+5
RG=50Ω
RL=500Ω
CL=5pF
-100
-150
-20
-10
0
10
20
30
40
50
0
OUTPUT
200mVP-P
VS=±5V
AV=+5
RG=50Ω
RL=500Ω
CL=5pF
FALL TIME
4ns
INPUT
40mVP-P
-50
-100
50
TIME (ns)
FIGURE 29. SMALL SIGNAL PULSE RESPONSE/RISE TIME
7
1k
FIGURE 28. OUTPUT SWING vs FREQUENCY
AMPLITUDE (mV)
AMPLITUDE (mV)
FIGURE 27. OUTPUT IMPEDANCE vs FREQUENCY
OUTPUT
200mVP-P
100
FREQUENCY (MHz)
FREQUENCY (Hz)
50
10
-150
270
280
290
300
310
320
330
TIME (ns)
FIGURE 30. SMALL SIGNAL PULSE REPONSE/FALL TIME
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
2
1
AMPLITUDE (mV)
AMPLITUDE (mV)
2
INPUT
400mVP-P
0
OUTPUT
2VP-P
RISE TIME
4.4ns
VS=±5V
AV=+5
RG=50Ω
RL=500Ω
CL=5pF
-1
-2
-20
-10
0
10
20
30
40
50
1
OUTPUT
2VP-P
0
INPUT
400mVP-P
VS=±5V
-1 AV=+5
RG=50Ω
RL=500Ω
CL=5pF
-2
30
40
50
TIME (ns)
2
2
SLEW RATE
275V/µs
AMPLITUDE (mV)
AMPLITUDE (mV)
3
0
-1
VS=±5V
AV=+5
RG=50Ω
RL=500Ω
CL=5pF
-2
-3
-20
-10
0
10
20
70
80
90
100
FIGURE 32. LARGE SIGNAL PULSE RESPONSE/RISE TIME
3
OUTPUT
4VP-P
60
TIME (ns)
FIGURE 31. LARGE SIGNAL PULSE RESPONSE/RISE TIME
1
FALL TIME
4.4ns
30
40
50
1
0
OUTPUT
4VP-P
-1 VS=±5V
AV=+5
RG=50Ω
-2
RL=500Ω
CL=5pF
-3
510
520
530
TIME (ns)
SLEW RATE
281V/µs
540
550
560
570
580
TIME (ns)
FIGURE 33. SLEW RATE (POSITIVE)
FIGURE 34. SLEW RATE (NEGATIVE)
AV=+10
VS=±5V
AV=+10
VS=±5V
CH1
CH1
CH2
CH2
CH1=1V
CH2=200mV
CH1=1V
CH2=200mV
200ns/DIV
FIGURE 35. ENABLE RESPONSE/TURN-ON TIME
8
200ns/DIV
FIGURE 36. DISABLE RESPONSE/TURN-OFF TIME
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
3.6
SUPPLY CURRENT (mA)
20
IP3 (dBm)
10
0
VS=±5V
-10 AV=+5
RG=50Ω
RL=500Ω
CL=5pF
-20
0.1
1
100
10
RG=50Ω
RL=500Ω
CL=5pF
3.5
AV=+10
AV=+5
3.4
3.3
3.2
2.5
1k
3.5
3
4.5
4
5
5.5
6
SUPPLY VOLTAGE (V)
FREQUENCY (MHz)
FIGURE 37. THIRD-ORDER INTERCEPT POINT
FIGURE 38. SUPPLY CURRENT vs SUPPLY VOLTAGE
DIFFERENTIAL
PHASE (°)
0.01
-0.01
-0.03
-10
0
10 20 30 40 50 60 70 80 90 100
0.03
0.01
-0.01
-0.03
-10
0
10 20 30 40 50 60 70 80 90 100
IRE
IRE
FIGURE 39. DIFFERENTIAL GAIN ERRORS
FIGURE 40. DIFFERENTIAL PHASE ERRORS
-20
AMPLITUDE (dBm)
DIFFERENTIAL
GAIN (%)
0.03
VS=±5V
AV=+5
RG=50Ω
-50 RL=500Ω
CL=5pF
f1
f1
-80
2f2-f1
2f1-f2
-110
-140
400
440
480
520
560
600
FREQUENCY (kHz)
FIGURE 41. IP3
9
FN7381.3
June 6, 2006
EL5130, EL5131
Typical Performance Curves
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1
1 909mW
θ
0.8
JA
=
0.6
435mW
0.4
SO
8
11
0°
C/
W
θJ
0.2
0
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
0.9
1.2
POWER DISSIPATION (W)
POWER DISSIPATION (W)
1.4
0
25
SO
T23
-5
A =23
0°C
/W
75 85 100
50
0.7 625mW
0.6
θ
JA
=
0.5
391mW
0.4
0.3
SO
8
16
0°
C/
W
θJ
125
150
0.2
FIGURE 42. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
0
SO
A =2
0.1
AMBIENT TEMPERATURE (°C)
10
0.8
0
25
50
T23
-5
56°
C/W
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
FIGURE 43. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FN7381.3
June 6, 2006
EL5130, EL5131
Small Outline Package Family (SO)
A
D
h X 45°
(N/2)+1
N
A
PIN #1
I.D. MARK
E1
E
c
SEE DETAIL “X”
1
(N/2)
B
L1
0.010 M C A B
e
H
C
A2
GAUGE
PLANE
SEATING
PLANE
A1
0.004 C
0.010 M C A B
L
b
0.010
4° ±4°
DETAIL X
MDP0027
SMALL OUTLINE PACKAGE FAMILY (SO)
SYMBOL
SO-8
SO-14
SO16
(0.150”)
SO16 (0.300”)
(SOL-16)
SO20
(SOL-20)
SO24
(SOL-24)
SO28
(SOL-28)
TOLERANCE
NOTES
A
0.068
0.068
0.068
0.104
0.104
0.104
0.104
MAX
-
A1
0.006
0.006
0.006
0.007
0.007
0.007
0.007
±0.003
-
A2
0.057
0.057
0.057
0.092
0.092
0.092
0.092
±0.002
-
b
0.017
0.017
0.017
0.017
0.017
0.017
0.017
±0.003
-
c
0.009
0.009
0.009
0.011
0.011
0.011
0.011
±0.001
-
D
0.193
0.341
0.390
0.406
0.504
0.606
0.704
±0.004
1, 3
E
0.236
0.236
0.236
0.406
0.406
0.406
0.406
±0.008
-
E1
0.154
0.154
0.154
0.295
0.295
0.295
0.295
±0.004
2, 3
e
0.050
0.050
0.050
0.050
0.050
0.050
0.050
Basic
-
L
0.025
0.025
0.025
0.030
0.030
0.030
0.030
±0.009
-
L1
0.041
0.041
0.041
0.056
0.056
0.056
0.056
Basic
-
h
0.013
0.013
0.013
0.020
0.020
0.020
0.020
Reference
-
16
20
24
28
Reference
N
8
14
16
Rev. L 2/01
NOTES:
1. Plastic or metal protrusions of 0.006” maximum per side are not included.
2. Plastic interlead protrusions of 0.010” maximum per side are not included.
3. Dimensions “D” and “E1” are measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994
11
FN7381.3
June 6, 2006
EL5130, EL5131
SOT-23 Package Family
MDP0038
e1
D
SOT-23 PACKAGE FAMILY
A
6
N
4
E1
2
E
3
0.15 C D
1
2X
2
3
0.20 C
5
2X
e
0.20 M C A-B D
B
b
NX
0.15 C A-B
1
SOT23-5
SOT23-6
TOLERANCE
A
1.45
1.45
MAX
A1
0.10
0.10
±0.05
A2
1.14
1.14
±0.15
b
0.40
0.40
±0.05
c
0.14
0.14
±0.06
D
2.90
2.90
Basic
E
2.80
2.80
Basic
E1
1.60
1.60
Basic
e
0.95
0.95
Basic
e1
1.90
1.90
Basic
L
0.45
0.45
±0.10
L1
0.60
0.60
Reference
N
5
6
Reference
Rev. E 3/00
3
NOTES:
D
2X
SYMBOL
1. Plastic or metal protrusions of 0.25mm maximum per side are
not included.
C
A2
SEATING
PLANE
3. This dimension is measured at Datum Plane “H”.
A1
0.10 C
2. Plastic interlead protrusions of 0.25mm maximum per side are
not included.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
5. Index area - Pin #1 I.D. will be located within the indicated zone
(SOT23-6 only).
NX
6. SOT23-5 version has no center lead (shown as a dashed line).
(L1)
H
A
GAUGE
PLANE
c
L
0.25
0° +3°
-0°
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
12
FN7381.3
June 6, 2006
Similar pages