MKT 1826 Vishay Roederstein Metallized Polyester Film Capacitor Quality Assessment: IEC 60384-2, CECC 30 401-059 Dimensions in millimeters MAIN APPLICATIONS: Blocking, bypassing, filtering and timing, high frequency coupling and decoupling of fast digital circuits. Interference suppression in low voltage applications. High pulse load. High temperature operations. W Max. L Max. Marking MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture DIELECTRIC: H Max. 0.5 ± 0.1 Polyester film ELECTRODES: Vacuum deposited aluminum 6.0-1 ± 0.4 COATING: Flame retardant plastic case (UL-class 94 V-0), green, epoxy resin sealed CONSTRUCTION: Ø 0.5 pcm 5.0 ± 0.4 Stacked metallized polyester film TIME CONSTANT: LEADS: IEC TEST CLASSIFICATION: Measured at 100 VDC (50 VDC and 63 VDC series measured at 50 VDC, 40 VDC measured with UR) after one minute 55/125/56, according to IEC 60068 55/100/21 (for 4.7µF/40 VDC) 5000 s minimum value (15,000 s typical value) Tinned wire For 0.33µF < C ≤ 3.3µF and UR ≤ 100 VDC: For C > 3.3µF and UR ≤ 100 VDC: OPERATING TEMPERATURE RANGE: - 55°C to + 125°C - 55°C to + 100°C (for 4.7µF/40 VDC) 1250 s minimum value (10,000 s typical value) CAPACITANCE DRIFT: CAPACITANCE RANGE: Up to + 40°C, ± 1.5% for a period of two years 1000pF to 4.7µF DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: CAPACITANCE TOLERANCES: ± 20% (M), ± 10% (K), ± 5% (J) RATED VOLTAGES (UR): 40 VDC, 50 VDC, 63 VDC, 100 VDC, 250 VDC PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR At + 125°C: UC = 0.5 UR (maximum 1000 h) 25 VAC, 30 VAC, 40 VAC, 63 VAC, 160 VAC SELF INDUCTANCE: TEST VOLTAGE (ELECTRODE/ELECTRODE): ~ 6 nH measured with 2mm long leads 1.6 x UR for 2 sec. PULL TEST ON LEADS: INSULATION RESISTANCE: ≥ 30 N in direction of leads according to IEC 60068-2-21 Measured at 100 VDC (50 VDC and 63 VDC series measured at 50 VDC) after one minute RELIABILITY: For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: 15,000 MΩ minimum value (100,000 MΩ typical value) Operational life > 300,000 h Failure rate < 2 FIT (40°C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. MAXIMUM PULSE RISE TIME Maximum pulse rise time d v /d t [V/µs] PCM (mm) 5.0 40 VDC 50 VDC 63 VDC 100 VDC 250 VDC 120 160 200 240 350 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. www.vishay.com 54 For technical questions, contact [email protected] Document Number 26007 Revision 11-Jun-02 MKT 1826 Vishay Roederstein Metallized Polyester, Quality Assess.: IEC 60384-2, CECC 30 401-059 DISSIPATION FACTOR TAN δ C ≤ 0.1µF MEASURED AT 0.1µF < C ≤ 1.0µF -3 1kHz 10kHz 100kHz 8 x 10 15 x 10-3 25 x 10-3 CAPACITANCE CAPACITANCE CODE C > 1.0µF -3 10 x 10-3 — — 8 x 10 15 x 10-3 — Maximum values VOLTAGE CODE 04 40 VDC/ 25 VAC VOLTAGE CODE 05 50 VDC/ 30 VAC VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25* 250 VDC/ 160 VAC W H L W H L W H L W H L W H L 1000 pF - 210 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 1500 pF - 215 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 2200 pF - 222 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 3300 pF - 233 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 4700 pF - 247 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 6800 pF - 268 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 0.01 µF - 310 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 0.015 µF - 315 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 0.022 µF - 322 — — — — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 0.033 µF - 333 — — — — — — — — — 2.5 6.5 7.2 3.0 7.5 7.2 0.047 µF - 347 — — — — — — — — — 2.5 6.5 7.2 3.5 8.5 7.2 0.068 µF - 368 — — — — — — — — — 2.5 6.5 7.2 4.5 9.5 7.2 0.10 µF - 410 — — — — — — 2.5 6.5 7.2 2.5 6.5 7.2 4.5 9.5 7.2 0.15 µF - 415 — — — — — — 2.5 6.5 7.2 3.0 7.5 7.2 5.5 11.5 7.2 0.22 µF - 422 — — — — — — 2.5 6.5 7.2 3.5 8.5 7.2 — — — 0.33 µF - 433 — — — — — — 3.0 7.5 7.2 4.5 9.5 7.2 — — — 0.47 µF - 447 — — — — — — 3.5 8.5 7.2 4.5 9.5 7.2 — — — 0.68 µF - 468 — — — — — — 4.5 9.5 7.2 5.5 11.5 7.2 — — — 1.0 µF - 510 — — — — — — 5.0 10.5 7.2 7.2 13.0 7.2 — — — 1.5 µF - 515 — — — 5.5 11.5 7.2 — — — — — — — — — 2.2 µF - 522 — — — 7.2 13.0 7.2 — — — — — — — — — 3.3 µF - 533 — — — 7.2 13.0 7.2 — — — — — — — — — 4.7 µF* - 547 7.2 13.0 7.2 — — — — — — — — — — — — Further C-values on request. *CECC approval in preparation. RECOMMENDED PACKAGING LETTER CODE D G F W — TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLE PCM 5 AMMO AMMO REEL REEL BULK 16.5 18.5 16.5 18.5 — S* S* 350 350 — MKT 1826-533-055-D MKT 1826-533-055-G MKT 1826-533-055-F MKT 1826-533-055-W MKT 1826-533-055 X X X X X *S = box size 55 x 210 x 340mm (W x H x L). Document Number 26007 Revision 11-Jun-02 For technical questions, contact [email protected] www.vishay.com 55 MKT 1826 100 V RMS [V] V RMS [V] Vishay Roederstein Metallized Polyester, Quality Assess.: IEC 60384-2, CECC 30 401-059 Capacitance in µF 100 Capacitance in µF 0.1 0 0.2 2 1.5 3.3 0.4 10 10 7 4.7 1.0 63 VDC 40 VDC 50 VDC 1 1 100 1000 10,000 100,000 100 1000 10,000 100,000 f [Hz] f [Hz] Permissible AC Voltage versus Frequency 100 V RMS [V] V RMS [V] Permissible AC Voltage versus Frequency 10 22 00 00 47 00 0.0 1.0 10 1000 Capacitance in pF and µF 1 0.0 2 0.4 7 0.2 2 0.1 10 2 0.0 4 00 22 0 100 7 0.1 5 0.1 0 0.0 47 100 VDC 22 250 VDC Capacitance in pF and µF 1 0 47 0 0.0 0 1 0.0 10 100 1000 10,000 100,000 100 1000 10,000 f [Hz] f [Hz] Permissible AC Voltage versus Frequency Z [Ω] 100,000 Permissible AC Voltage versus Frequency 100 10 0.01 0.1 1 10 1000 pF 0.01 µF 0.033 µF 0.1 µF 1 µF 0.01 0.33 µF 2.2 µF 0.1 3300 pF 1 100 f [MHz] Impedance versus Frequency Z = f (f) (Lead length 2.0mm) www.vishay.com 56 For technical questions, contact [email protected] Document Number 26007 Revision 11-Jun-02