Kingbright AA1114/2MBC/CC 11mm x 1.4mm backlight Datasheet

11mm x 1.4mm BACKLIGHT
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
AA1114/2MBC/CC
BLUE
Description
LOW POWER CONSUMPTION.
The Blue source color devices are made with GaN on SiC
IDEAL FOR BACKLIGHTING.
Light Emitting Diode.
RoHS COMPLIANT.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB2775
REV NO: V.3
DATE: APR/21/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1201000010
Selection Guide
Part No.
Dice
AA1114/2MBC/CC
Iv (mcd)
@ 20mA
Lens Type
BLUE (GaN)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
4
10
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
430
nm
IF=20mA
Blue
466
nm
IF=20mA
Spectral Line Half-width
Blue
60
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF
Forward Voltage
Blue
3.8
4.5
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAB2775
REV NO: V.3
DATE: APR/21/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1201000010
Blue
AA1114/2MBC/CC
SPEC NO: DSAB2775
REV NO: V.3
DATE: APR/21/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1201000010
PACKING & LABEL SPECIFICATIONS
AA1114/2MBC/CC
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB2775
REV NO: V.3
DATE: APR/21/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1201000010
Similar pages