BRIGHT BL-PSG-SSS-C10 High brightness surface mount led. Datasheet

•
High brightness surface mount LED.
•
Designed for sideway illumination.
•
Small package outline.
•
Qualified according to JEDEC moisture sensitivity Level 2.
•
Compatible to both IR reflow soldering and TTW soldering.
Part Ordering Number
Chip Technology /
Color
λdom
( nm )
AlInGaP /
Super-red,
632 nm
120
AlInGaP /
Red, 625 nm
120
Luminous Intensity @ If = 20mA
Iv ( mcd )
45.0 … 112.5
45.0 … 56.0
56.0 … 71.5
71.5 … 90.0
90.0 … 112.5
45.0 … 112.5
45.0 … 56.0
56.0 … 71.5
71.5 … 90.0
90.0 … 112.5
71.5 … 180.0
71.5 … 90.0
90.0 … 112.5
112.5 … 140.0
140.0 … 180.0
71.5 … 180.0
71.5 … 90.0
90.0 … 112.5
112.5 … 140.0
140.0 … 180.0
TS AlInGaP /
180.0 … 450.0
Red, 625 nm
180.0 … 224.0
224.0 … 285.0
285.0 … 355.0
355.0 … 450.0
AlInGaP /
Amber, 615 nm
120
71.5 … 180.0
71.5 … 90.0
90.0 … 112.5
112.5 … 140.0
140.0 … 180.0
112.5 … 285.0
112.5 … 140.0
140.0 … 180.0
180.0 … 224.0
224.0 … 285.0
Part Ordering Number
Chip Technology /
Color
λdom
( nm )
AlInGaP /
120
Luminous Intensity @ If = 20mA
Iv ( mcd )
Orange, 605 nm
71.5 … 180.0
71.5 … 90.0
90.0 … 112.5
112.5 … 140.0
140.0 … 180.0
112.5 … 285.0
112.5 … 140.0
140.0 … 180.0
180.0 … 224.0
224.0 … 285.0
AlInGaP /
120
Yellow, 587 nm
71.5 … 180.0
71.5 … 90.0
90.0 … 112.5
112.5 … 140.0
140.0 … 180.0
112.5 … 285.0
112.5 … 140.0
140.0 … 180.0
180.0 … 224.0
224.0 … 285.0
AlInGaP /
120
Green, 572 nm
45.0 … 90.0
45.0 … 56.0
56.0 … 71.5
71.5 … 90.0
90.0 … 112.5
NOTE:
1. All part number above comes in a standard quantity of 2500 units per reel.
2. Other luminous intensity groups are also available upon request.
3. Luminous intensity is measured with an accuracy of ±11%.
4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one
wavelength group is allowed for each reel.
5. Vf binning is optional. Vf binning scheme is as per the following table. Please contact marketing
for special part number.
Wavelength Grouping.
Color
Group
Wavelength distribution (nm)
BL-PSS; Super Red
Full
625 - 640
BL-PSR-CS, -SS; Red (AS)
Full
620 – 630
BL-PSR-TS; Red (TS)
BL-PSA; Amber
BL-PSO; Orange
BL-PSY; Yellow
BL-PSG; Green
620 - 635
Full
610 – 621
W
610 – 615
X
615 – 621
Full
600 – 612
W
600 – 603
X
603 – 606
Y
606 - 609
Z
609 - 612
Full
582 - 594
W
582 - 585
X
585 - 588
Y
588 - 591
Z
591 - 594
Full
564.5 – 576.5
W
564.5 – 567.5
X
567.5 – 570.5
Y
570.5 – 573.5
Z
573.5 – 576.5
Dominant wavelength is measured with an accuracy of ±1 nm.
Vf Binning (Optional).
Vf Bin @ 20mA
Forward voltage (V)
01
1.55 … 1.85
02
1.85 … 2.15
03
2.15 … 2.45
04
2.45 … 2.75
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current.
20
mA
Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005)
200
mA
Reverse voltage.
12
V
ESD Threshold; HBM
2000
V
LED junction temperature.
125
°C
Operating temperature.
-40 … +100
°C
Storage temperature.
-40 … +100
°C
50
mW
Power dissipation ( at room temperature )
Recommended Solder Pad
Relative luminous intensity vs. forward current.
Forward current vs. forward voltage.
Intensity vs. DC Forward Current
Forward Current (mA) vs. Forward Voltage
30
2
1.8
Forward Current (mA)
Relative intensity. Normalized at 20 mA.
35
2.2
1.6
1.4
1.2
1
0.8
0.6
0.4
25
AS AlInGaP
20
15
TS AlInGaP
10
5
0.2
0
0
0
10
20
30
40
50
1.2
60
1.4
1.6
FORWARD CURRENT (mA)
Radiation pattern.
30°
20°
1.8
2
2.2
2.4
2.6
Forward Voltage (V)
Maximum current vs. ambient temperature
10°
0°
25
1.0
40°
20
Forward Current, If
0.8
0.6
50°
0.4
60°
15
10
5
70°
0.2
0
80°
0
0
90°
Relative Spectra Emission
1.0
0.9
Orange
Relative Intensity
0.8
Red
0.7
Super Red
0.6
Green
Hyper Red
0.4
0.3
0.2
0.1
0.0
500
550
600
650
Wavelength (nm)
20
30
40
50
60
Ambient Temperature
Relative Intensity vs. Wavelength
0.5
10
700
750
800
70
80
90 100
Taping And Orientation.
Reels come in quantity of 2500 units.
Reel diameter is 180 mm.
Recommended Sn-Pb IR-Reflow Soldering Profile.
Classification Reflow Profile (JEDEC J-STD-020C)
275
250
235-240oC
10-30s
Temperature (oC)
225
200
Ramp-up
3 oC/sec
o
183 C
175
60-150s
150
125
Ramp-down
6 oC/sec max.
100
Preheat
60-120s
75
50
360s max
25
0
50
100
150
200
Time (sec)
Recommended Pb Free IR-Reflow Soldering Profile.
Classification Reflow Profile (JEDEC J-STD-020C)
300
275
o
Temperature ( C)
250
Ramp-up
3 oC/sec max.
217 oC
225
255-260oC
10-30s
200
60-150s
175
150
125
Ramp-down
6 oC/sec max.
100
Preheat
60-180s
75
50
480s max
25
0
50
100
Time (sec)
150
200
Similar pages