Vishay DG308A Quad monolithic spst cmos analog switch Datasheet

DG308A, DG309
Vishay Siliconix
Quad Monolithic SPST CMOS Analog Switches
DESCRIPTION
FEATURES
Featuring low on-resistance (60 ) and fast switching
(130 ns), the DG308A is supplied in the “normally open”
configuration while DG309 is supplied “normally closed”.
Input thresholds are high voltage CMOS compatible.
• ± 15 V analog input range
Designed with the Vishay Siliconix PLUS-40 CMOS process
to combine low power dissipation with a high breakdown
voltage rating of 44 V, each switch conducts equally well in
both directions when on, and blocks up to the supply voltage
when off. An epitaxial layer prevents latch up.
• CMOS logic compatible
• Low on-resistance: 60 
• Fast switching: 130 ns
• Low power dissipation: 30 nW
BENEFITS
• Full rail-to-rail analog signal range
• Low signal error
The DG308B, DG309B upgrades are recommended for new
designs.
• Wide dynamic range
• Single or dual supply capability
• Static protected logic inputs
• Space savings (TSSOP)
APPLICATIONS
• Portable and battery powered instrumentation
• Communication systems
• Computer peripherals
• High-speed multiplexing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG308A
IN1
1
16
IN2
D1
2
15
D2
S1
3
14
S2
V–
4
13
V+
GND
5
12
NC
S4
6
11
S3
D4
7
10
D3
IN4
8
9
IN3
For SPST Switches per Package
TRUTH TABLE
Logic
0
1
DG308A
OFF
ON
DG309
ON
OFF
Logic “0” 3.5 V
Logic “1” 11 V
Top View
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 70046
S11-0303-Rev. G, 28-Feb-11
www.vishay.com
1
DG308A, DG309
Vishay Siliconix
ORDERING INFORMATION
Temp. Range
Package
0 °C to 70 °C
16-Pin Plastic DIP
16-Pin Narrow SOIC
- 40 °C to 85 °C
16-Pin TSSOP
Part Number
DG308ACJ
DG308ACJ-E3
DG309CJ
DG309CJ-E3
DG308ADY
DG308ADY-E3
DG308ADY-T1
DG308ADY-T1-E3
DG309DY
DG309DY-E3
DG309DY-T1
DG309DY-T1-E3
DG308ADQ
DG308ADQ-E3
DG308ADQ-T1
DG308ADQ-T1-E3
DG309DQ
DG309DQ-E3
DG309DQ-T1
DG309DQ-T1-E3
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Voltages Referenced V+ to VGND
25
(V-) - 2 to (V+) + 2 or
20 mA, whichever occurs first
Digital Inputsa, VS, VD
Current, Any Terminal Except S or D
Continuous Current
Storage Temperature
Power Dissipation
Unit
44
b
V
30
S or D
20
(Pulsed at 1 ms, 10 % duty cycle max.)
70
(AK Suffix)
- 65 to 150
(CJ, DY and DQ Suffix)
- 65 to 125
16-Pin Plastic DIPc
470
16-Pin Narrow SOIC and TSSOPe
600
16-Pin CerDIPd
900
mA
°C
mW
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 12 mW/°C above 75 °C.
d. Derate 6.5 mW/°C above 25 °C.
e. Derate 7.6 mW/°C above 75 °C.
www.vishay.com
2
Document Number: 70046
S11-0303-Rev. G, 28-Feb-11
DG308A, DG309
Vishay Siliconix
SCHEMATIC DIAGRAM (Typical Channel)
V+
S
VLevel
Shift/
Drive
VIN
V+
GND
D
V-
Figure 1.
SPECIFICATIONSa
Parameter
Symbol
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
VIN = 3.5 V or 11 Vf
A Suffix
- 55 °C to 125°C
Temp.b
Typ.c
C, D Suffix
Min.d
Max.d
Min.d
- 15
15
100
150
1
100
1
100
1
100
- 15
Max.d Unit
Analog Switch
Analog Signal Rangee
Drain-Source
On-Resistance
RDS(on)
VD = ± 10 V, IS = 1 mA
Source Off Leakage Current
IS(off)
VS = ± 14 V, VD = ± 14 V
Drain Off Leakage Current
ID(off)
VD = ± 14 V, VS = ± 14 V
Drain On Leakage Current
ID(on)
VD = VS = ± 14 V
Full
Room
Full
Room
Full
Room
Full
Room
Full
IINH
VIN = 15 V
Full
0.001
IINL
VIN = 0 V
Full
- 0.001
Room
8
Room
130
200
200
Room
90
150
150
Room
- 10
Room
11
Digital Control
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
Input Capacitance
VANALOG
CIN
tON
Turn-Off Time
tOFF
Q
Source-Off Capacitance
CS(off)
Drain-Off Capacitance
CD(off)
Channel-On Capacitance
CD(on)
Off-Isolationf
OIRR
Document Number: 70046
S11-0303-Rev. G, 28-Feb-11
± 0.1
± 0.1
± 0.1
-1
100
-1
100
-1
100
-5
- 100
-5
- 100
-5
- 200
1
15
100
125
5
100
5
100
5
200
V

nA
1
µA
Dynamic Characteristics
Turn-On Time
Charge Injection
60
see figure 2
CL = 0.01 µF, Rgen = 0  Vgen = 0 V,
f = 140 kHz, VS, VD = 0 V
RL = 75 , VS = 2 Vp-p, f = 500 kHz
Room
8
Room
27
Room
78
-1
-1
pF
ns
pC
pF
dB
www.vishay.com
3
DG308A, DG309
Vishay Siliconix
SPECIFICATIONSa
Parameter
Power Supplies
Symbol
Positive Supply Current
I+
Negative Supply Current
I-
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
VIN = 3.5 V or 11 Vf
A Suffix
- 55 °C to 125°C
all channels on or off
VIN = 0 V or 15 V
Temp.b
Typ.c
Room
Full
Room
Full
0.001
Min.d
C, D Suffix
Max.d
Min.d
Max.d Unit
10
100
- 0.001
10
100
- 10
- 100
µA
- 100
Notes:
a.Refer to PROCESS OPTION FLOWCHART.
b.Room = 25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d.The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e.Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
± 15 V Supplies
TA = 25 °C
±5V
800
120
600
± 7.5 V
90
I+, I- (µA)
RDS(on) - Drain-Source On-Resistance ()
1000
TA = 25 °C
150
± 10 V
60
30
I200
± 20 V
0
- 20
- 10
-5
5
0
10
VD - Drain Voltage (V)
15
20
1k
100 k
1M
Supply Currents vs. Switching Frequency (All Inputs Active)
250
R DS(on) - Drain-Source On-Resistance ()
TA = 25 °C
10
IS(off)
0
ID(off)
ID(on)
- 20
- 30
- 15 - 12 - 9 - 6 - 3
0
3
6
9
12
VD or VS - Drain or Source Voltage (V)
Leakage Currents vs. Analog Voltage
www.vishay.com
4
10 k
f - Frequency (Hz)
20
- 10
I+
100
- 15
RDS(on) vs. VD and Power Supply
I S, I D (pA)
400
± 15 V
15
V+ = + 7.5 V
TA = 25 °C
V- = 0 V
200
150
+ 10 V
100
+ 15 V
+ 20 V
50
0
0
5
10
15
20
VD - Drain Voltage (V)
RDS(on) vs. VD and Power Supply Voltage
Document Number: 70046
S11-0303-Rev. G, 28-Feb-11
DG308A, DG309
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10
8
TA = 25 °C
V- = 0 V
TA = 25 °C
7
8
6
5
V T (V)
V T (V)
6
4
4
3
2
2
1
0
0
±5
0
± 10
± 15
± 20
0
V+, V- Positive and Negative Supplies (V)
5
10
15
V+ - Positive Supply Voltage (V)
Input Switching Threshold
vs. V+ and V- Supply Voltages
Input Switching Threshold vs. Positive
Supply Voltage
+ 15 V
V+
VS = + 3 V
D
S
VO
Logic
Input
tr < 20 ns
tf < 20 ns
12 V
50 %
0V
tOFF
IN
12 V
GND
V-
RL
1 k
CL
35 pF
90 %
Switch
Output
- 15 V
VO = V S
VO
tON
RL
RL + R DS(on)
Figure 2. Switching Time
APPLICATIONS
Single Supply Operation
The DG308A and DG309 will switch positive analog signals
while using a single positive supply. This will allow use in
many applications where only one supply is available. The
trade-offs or performance given up while using single
supplies are:
1) increased RDS(on) and 2) slower switching speed. As
stated in the absolute maximum ratings section of the data
sheet, the analog voltage should not go above or below the
supply voltages which in single supply operation are V+ and
0 V.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?70046.
Document Number: 70046
S11-0303-Rev. G, 28-Feb-11
www.vishay.com
5
Package Information
Vishay Siliconix
SOIC (NARROW):
16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
16
15
14
13
12
11
10
Dim
A
A1
B
C
D
E
e
H
L
Ĭ
9
E
1
2
3
4
5
6
7
8
INCHES
Min
Max
Min
Max
1.35
1.75
0.053
0.069
0.10
0.20
0.004
0.008
0.38
0.51
0.015
0.020
0.18
0.23
0.007
0.009
9.80
10.00
0.385
0.393
3.80
4.00
0.149
0.157
1.27 BSC
0.050 BSC
5.80
6.20
0.228
0.244
0.50
0.93
0.020
0.037
0_
8_
0_
8_
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
e
Document Number: 71194
02-Jul-01
B
A1
L
Ĭ
0.101 mm
0.004 IN
www.vishay.com
1
Package Information
Vishay Siliconix
PDIP: 16ĆLEAD
16
15
14
13
12
11
10
9
E
E1
1
2
3
4
5
6
7
8
D
S
Q1
A
A1
L
15°
MAX
C
B1
e1
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
Q1
S
B
eA
MILLIMETERS
Min
Max
INCHES
Min
Max
3.81
5.08
0.150
0.200
0.38
1.27
0.015
0.050
0.38
0.51
0.015
0.020
0.89
1.65
0.035
0.065
0.20
0.30
0.008
0.012
18.93
21.33
0.745
0.840
7.62
8.26
0.300
0.325
5.59
7.11
0.220
0.280
2.29
2.79
0.090
0.110
7.37
7.87
0.290
0.310
2.79
3.81
0.110
0.150
1.27
2.03
0.050
0.080
0.38
1.52
.015
0.060
ECN: S-03946—Rev. D, 09-Jul-01
DWG: 5482
Document Number: 71261
06-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
CERDIP: 16ĆLEAD
16
15
14
13
12
11
10
9
E1 E
1
2
3
4
5
6
7
8
D
S
Q1
A
A1
L1
L
e1
C
B
B1
MILLIMETERS
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
L1
Q1
S
∝
eA
INCHES
Min
Max
Min
Max
4.06
5.08
0.160
0.200
0.51
1.14
0.020
0.045
0.38
0.51
0.015
0.020
1.14
1.65
0.045
0.065
0.20
0.30
0.008
0.012
19.05
19.56
0.750
0.770
7.62
8.26
0.300
0.325
6.60
7.62
0.260
0.300
2.54 BSC
∝
0.100 BSC
7.62 BSC
0.300 BSC
3.18
3.81
0.125
0.150
3.81
5.08
0.150
0.200
1.27
2.16
0.050
0.085
0.38
1.14
0.015
0.045
0°
15°
0°
15°
ECN: S-03946—Rev. G, 09-Jul-01
DWG: 5403
Document Number: 71282
03-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
Nom
Max
A
-
1.10
1.20
A1
0.05
0.10
0.15
A2
-
1.00
1.05
0.38
B
0.22
0.28
C
-
0.127
-
D
4.90
5.00
5.10
E
6.10
6.40
6.70
E1
4.30
4.40
4.50
e
-
0.65
-
L
0.50
0.60
0.70
L1
0.90
1.00
1.10
y
-
-
0.10
θ1
0°
3°
6°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.152
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
(3.861)
0.246
(6.248)
0.047
(1.194)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages