Omron E2E-X2D1-M1 A new series of easy-to-use and tough e2e/e2e2 models long-size e2e2 proximity sensor conforms to cenelec Datasheet

Cylindrical Proximity Sensor
E2E/E2E2
A New Series of Easy-to-use
and Tough E2E/E2E2 Models
Long-size E2E2 Proximity Sensor Conforms to CENELEC
• Ideal for a variety of applications.
• With a metal connector that can be tightened
securely and a cable protector.
• With an easy-to-see indicator, deeper mounting
holes, and tightening flats for wrenches.
• New 3-dia. size (sensing distance: 0.6 mm) added to
the lineup.
<READ AND UNDERSTAND THIS CATALOG>
Please read and understand this catalog before purchasing
the products. Please consult your OMRON representative if
you have any questions or comments.
Ordering Information
E2E
DC 2-wire/Pre-wired Models
Self-diagnostic
output function
Yes
Size
Model
NO
Shielded
Unshielded
No
Sensing distance
Shielded
Unshielded
M12
3 mm
NC
E2E-X3D1S (See note 1.)
---
M18
7 mm
E2E-X7D1S (See note 1.)
---
M30
10 mm
E2E-X10D1S (See note 1.)
---
M12
8 mm
E2E-X8MD1S (See note 1.)
---
M18
14 mm
E2E-X14MD1S (See note 1.)
---
M30
20 mm
E2E-X20MD1S (See note 1.)
---
M8
2 mm
E2E-X2D1-N (See notes 2 and 3.)
E2E-X2D2-N (See note 3.)
M12
3 mm
E2E-X3D1-N (See notes 1, 2 and 3.)
E2E-X3D2-N (See note 3.)
M18
7 mm
E2E-X7D1-N (See notes 1, 2 and 3.)
E2E-X7D2-N (See note 3.)
M30
10 mm
E2E-X10D1-N (See notes 1, 2 and 3.) E2E-X10D2-N
M8
4 mm
E2E-X4MD1 (See notes 2 and 3.)
M12
8 mm
E2E-X8MD1 (See notes 1, 2 and 3.)
E2E-X8MD2
M18
14 mm
E2E-X14MD1 (See notes 1, 2 and 3.)
E2E-X14MD2
M30
20 mm
E2E-X20MD1 (See notes 1, 2 and 3.
E2E-X20MD2
E2E-X4MD2
Note 1. In addition to the above models, E2E-X@@15 models (e.g., E2E-X3D15-N), which are different in frequency from the above models, are
available.
2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix “-R”
(e.g., E2E-X3D1-R).
3. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X3D1-N 5M).
E2E/E2E2 Cylindrical Proximity Sensor
1
DC 2-wire/Connector Models
Connector
Self-diagnostic
output function
M12
Yes
Size
Shielded
Unshielded
No
Shielded
Unshielded
M8
Shielded
Sensing
distance
M12
3 mm
M18
M30
Model
NO
NC
E2E-X3D1S-M1
---
7 mm
E2E-X7D1S-M1
---
10 mm
E2E-X10D1S-M1
---
M12
8 mm
E2E-X8MD1S-M1
---
M18
14 mm
E2E-X14MD1S-M1
---
M30
20 mm
E2E-X20MD1S-M1
---
M8
2 mm
E2E-X2D1-M1G
E2E-X2D2-M1G
M12
3 mm
E2E-X3D1-M1G (See note.)
E2E-X3D2-M1G
M18
7 mm
E2E-X7D1-M1G (See note.)
E2E-X7D2-M1G
M30
10 mm
E2E-X10D1-M1G (See note.)
E2E-X10D2-M1G
M8
4 mm
E2E-X4MD1-M1G
E2E-X4MD2-M1G
M12
8 mm
E2E-X8MD1-M1G (See note.)
E2E-X8MD2-M1G
M18
14 mm
E2E-X14MD1-M1G (See note.)
E2E-X14MD2-M1G
M30
20 mm
E2E-X20MD1-M1G (See note.)
E2E-X20MD2-M1G
M8
2 mm
E2E-X2D1-M3G
E2E-X2D2-M3G
4 mm
E2E-X4MD1-M3G
E2E-X4MD2-M3G
Unshielded
Note: In addition to the above models, E2E-X@D15-M1G models (e.g., E2E-X3D15-M1G), which are different in frequency from the above models,
are available.
DC 2-wire/Pre-wired Connector Models
Size
Shielded
Unshielded
Sensing distance
M12
3 mm
M18
7 mm
M30
10 mm
Operation mode
Polarity
NO
Yes
Model
E2E-X3D1-M1GJ
No
E2E-X3D1-M1J-T
Yes
E2E-X7D1-M1GJ
No
E2E-X7D1-M1J-T
Yes
E2E-X10D1-M1GJ
No
E2E-X10D1-M1J-T
Yes
E2E-X8MD1-M1GJ
M12
8 mm
M18
14 mm
E2E-X14MD1-M1GJ
M30
20 mm
E2E-X20MD1-M1GJ
Note 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the
PLC’s ON voltage, for example) when connecting the Proximity Sensor to a load.
2. The standard cable length is 300 mm. Models are also available with 500 mm and 1 m cables.
Connector Pin Assignments of DC 2-wire Model
The connector pin assignments of each new E2E DC 2-wire conforms to IEC947-5-2 Table III.
The following E2E models with conventional connector pin assignments are available as well.
Size
Shielded
Operation mode
M8
M12
M18
M30
2
Model
NO
E2E-X2D1-M1
NC
E2E-X2D2-M1
NO
E2E-X3D1-M1
NC
E2E-X3D2-M1
NO
E2E-X7D1-M1
NC
E2E-X7D2-M1
NO
E2E-X10D1-M1
NC
E2E-X10D2-M1
E2E/E2E2 Cylindrical Proximity Sensor
Size
Unshielded
Operation mode
M8
M12
M18
M30
Model
NO
E2E-X4MD1-M1
NC
E2E-X4MD2-M1
NO
E2E-X8MD1-M1
NC
E2E-X8MD2-M1
NO
E2E-X14MD1-M1
NC
E2E-X14MD2-M1
NO
E2E-X20MD1-M1
NC
E2E-X20MD2-M1
DC 3-wire/Pre-wired Models
Size
Sensing
Output
distance configuration
Shielded 3 dia. 0.6 mm
4 dia. 0.8 mm
M5
5.4
dia.
M8
M12
M18
M30
1 mm
1 mm
1.5 mm
2 mm
5 mm
10 mm
Size
Model
UnM8
shielded
Sensing
Output
distance configuration
2 mm
Model
NPN NO
E2E-X2ME1
(See note 2.)
NPN NO
E2E-CR6C1
NPN NC
E2E-X2ME2
NPN NC
E2E-CR6C2
PNP NO
E2E-X2MF1
PNP NO
E2E-CR6B1
PNP NC
E2E-X2MF2
PNP NC
E2E-CR6B2
NPN NO
NPN NO
E2E-CR8C1
(See notes 1 and 2.)
E2E-X5ME1 (See notes
1, 2, 3, and 4.)
NPN NC
NPN NC
E2E-CR8C2
E2E-X5ME2 (See notes
3 and 4.)
PNP NO
E2E-CR8B1
PNP NO
E2E-X5MF1
PNP NC
E2E-CR8B2
PNP NC
E2E-X5MF2
NPN NO
E2E-X1C1
(See notes 1 and 2.)
NPN NO
E2E-X10ME1 (See notes
1, 2, 3, and 4.)
NPN NC
E2E-X1C2
NPN NC
E2E-X10ME2
(See notes 3 and 4.)
PNP NO
E2E-X1B1
PNP NO
E2E-X10MF1
PNP NC
E2E-X1B2
PNP NC
E2E-X10MF2
NPN NO
E2E-C1C1
(See notes 1 and 2.)
NPN NO
E2E-X18ME1 (See notes
1, 2, 3, and 4.)
NPN NC
E2E-C1C2
NPN NC
PNP NO
E2E-C1B1
E2E-X18ME2
(See notes 3 and 4.)
M12
M18
M30
5 mm
10 mm
18 mm
PNP NC
E2E-C1B2
PNP NO
E2E-X18MF1
NPN NO
E2E-X1R5E1
(See notes 1 and 2.)
PNP NC
E2E-X18MF2
NPN NC
E2E-X1R5E2
PNP NO
E2E-X1R5F1
PNP NC
E2E-X1R5F2
NPN NO
E2E-X2E1 (See notes 1,
2, 3, and 4.)
NPN NC
E2E-X2E2
(See notes 3 and 4.)
PNP NO
E2E-X2F1
PNP NC
E2E-X2F2
Note 1. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2E1
5M).
2. Models with a robotics cable are also available. These
models are E2E-X@E1-R (e.g., E2E-X5E1-R).
3. Models with a different frequency are also available. These
models are E2E-X@E@5 (e.g., E2E-X5E15).
4. These models have e-CON connectors (0.3 m cable length),
which is indicated by the suffix “-ECON” (e.g., E2E-X2E1ECON).
NPN NO
E2E-X5E1 (See notes 1,
2, 3, and 4.)
AC 2-wire/Pre-wired Models
NPN NC
E2E-X5E2
(See notes 3 and 4.)
PNP NO
E2E-X5F1
PNP NC
E2E-X5F2
NPN NO
E2E-X10E1 (See notes
1, 2, 3, and 4.)
NPN NC
E2E-X10E2
(See notes 3 and 4.)
PNP NO
E2E-X10F1
PNP NC
E2E-X10F2
Size
Shielded M8
Sensing
distance
1.5 mm
Operation
mode
NO
Model
E2E-X1R5Y1
NC
E2E-X1R5Y2
E2E-X2Y1
(See notes 1 and 2.)
M12
2 mm
NO
NC
E2E-X2Y2
M18
5 mm
NO
E2E-X5Y1
(See notes 1 and 2.)
NC
E2E-X5Y2
M30
10 mm
NO
E2E-X10Y1
(See notes 1 and 2.)
NC
E2E-X10Y2
2 mm
NO
E2E-X2MY1
UnM8
shielded
NC
E2E-X2MY2
E2E-X5MY1
(See notes 1 and 2.)
M12
5 mm
NO
NC
E2E-X5MY2
M18
10 mm
NO
E2E-X10MY1
(See note 1.)
NC
E2E-X10MY2
M30
18 mm
NO
E2E-X18MY1
(See note 1.)
NC
E2E-X18MY2
Note 1. Models with a different frequency are also available. These
models are E2E-X@Y@5 (e.g., E2E-X5Y15).
2. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2Y1
5M).
E2E/E2E2 Cylindrical Proximity Sensor
3
DC 3-wire/Connector Models
Connector
M12
Size
Sensing
Output
distance configuration
Shielded M8
M12
M18
M30
Unshielded
M8
M12
M18
M30
M8-3 pin
Shielded M8
Unshielded
4
2 mm
5 mm
10 mm
2 mm
5 mm
10 mm
18 mm
Shielded 4 dia. 0.8 mm
M5
M8
1.5 mm
M8
1 mm
1.5 mm
2 mm
AC 2-wire/Connector Models
Model
NPN NO
E2E-X1R5E1-M1
NPN NC
E2E-X1R5E2-M1
PNP NO
E2E-X1R5F1-M1
PNP NC
E2E-X1R5F2-M1
NPN NO
E2E-X2E1-M1
NPN NC
E2E-X2E2-M1
PNP NO
E2E-X2F1-M1
PNP NC
E2E-X2F2-M1
NPN NO
E2E-X5E1-M1
NPN NC
E2E-X5E2-M1
PNP NO
E2E-X5F1-M1
PNP NC
E2E-X5F2-M1
NPN NO
E2E-X10E1-M1
NPN NC
E2E-X10E2-M1
PNP NO
E2E-X10F1-M1
PNP NC
E2E-X10F2-M1
NPN NO
E2E-X2ME1-M1
NPN NC
E2E-X2ME2-M1
PNP NO
E2E-X2MF1-M1
PNP NC
E2E-X2MF2-M1
NPN NO
E2E-X5ME1-M1
NPN NC
E2E-X5ME2-M1
PNP NO
E2E-X5MF1-M1
PNP NC
E2E-X5MF2-M1
NPN NO
E2E-X10ME1-M1
NPN NC
E2E-X10ME2-M1
PNP NO
E2E-X10MF1-M1
PNP NC
E2E-X10MF2-M1
NPN NO
E2E-X18ME1-M1
NPN NC
E2E-X18ME2-M1
PNP NO
E2E-X18MF1-M1
PNP NC
E2E-X18MF2-M1
NPN NO
E2E-CR8C1-M5
NPN NC
E2E-CR8C2-M5
PNP NO
E2E-CR8B1-M5
PNP NC
E2E-CR8B2-M5
NPN NO
E2E-X1C1-M5
NPN NC
E2E-X1C2-M5
PNP NO
E2E-X1B1-M5
PNP NC
E2E-X1B2-M5
NPN NO
E2E-X1R5E1-M3
NPN NC
E2E-X1R5E2-M3
PNP NO
E2E-X1R5F1-M3
PNP NC
E2E-X1R5F2-M3
NPN NO
E2E-X2ME1-M3
NPN NC
E2E-X2ME2-M3
PNP NO
E2E-X2MF1-M3
PNP NC
E2E-X2MF2-M3
E2E/E2E2 Cylindrical Proximity Sensor
Size
Shielded M12
Sensing
distance
2 mm
Operation
mode
NO
Model
E2E-X2Y1-M1
NC
E2E-X2Y2-M1
E2E-X5Y1-M1
M18
5 mm
NO
NC
E2E-X5Y2-M1
M30
10 mm
NO
E2E-X10Y1-M1
NC
E2E-X10Y2-M1
5 mm
NO
E2E-X5MY1-M1
NC
E2E-X5MY2-M1
M18
10 mm
NO
E2E-X10MY1-M1
NC
E2E-X10MY2-M1
M30
18 mm
NO
E2E-X18MY1-M1
NC
E2E-X18MY2-M1
UnM12
shielded
AC/DC 2-wire/Pre-wired Models
Size
Sensing
distance
Operation
mode
NO
Model
Shielded M12
3 mm
M18
7 mm
E2E-X7T1
(See note 2.)
E2E-X3T1
M30
10 mm
E2E-X10T1
Note 1. These models do not conform to CE standards.
2. Cables with a length of 5 m are also available as standard
models. Specify the cable length at the end of the model
number (e.g., E2E-X7T1 5M).
E2E2
DC 2-wire/Pre-wired Models
Size
Shielded
Unshielded
Sensing distance
Operation mode
NO (See note.)
Model
M12
3 mm
E2E2-X3D1
M18
7 mm
NC
E2E2-X7D2
M30
10 mm
NO (See note.)
E2E2-X10D1
NC
E2E2-X10D2
M12
8 mm
NO (See note.)
E2E2-X8MD1
M18
14 mm
M30
20 mm
NC
E2E2-X3D2
NO (See note.)
E2E2-X7D1
NC
E2E2-X8MD2
NO (See note.)
E2E2-X14MD1
NC
E2E2-X14MD2
NO (See note.)
E2E2-X20MD1
NC
E2E2-X20MD2
Note: In addition to the above models, E2E-X@D15 models (e.g., E2E-X3D15), which are different in frequency from the above models, are
available.
DC 3-wire/Pre-wired Models
Size
Shielded
Sensing distance
M12
M18
M30
Unshielded
M12
M18
M30
2 mm
5 mm
10 mm
5 mm
10 mm
18 mm
Output configuration
Model
NPN NO
E2E2-X2C1
NPN NC
E2E2-X2C2
PNP NO
E2E2-X2B1
PNP NC
E2E2-X2B2
NPN NO
E2E2-X5C1
NPN NC
E2E2-X5C2
PNP NO
E2E2-X5B1
PNP NC
E2E2-X5B2
NPN NO
E2E2-X10C1
NPN NC
E2E2-X10C2
PNP NO
E2E2-X10B1
PNP NC
E2E2-X10B2
NPN NO
E2E2-X5MC1
NPN NC
E2E2-X5MC2
PNP NO
E2E2-X5MB1
PNP NC
E2E2-X5MB2
NPN NO
E2E2-X10MC1
NPN NC
E2E2-X10MC2
PNP NO
E2E2-X10MB1
PNP NC
E2E2-X10MB2
NPN NO
E2E2-X18MC1
NPN NC
E2E2-X18MC2
PNP NO
E2E2-X18MB1
PNP NC
E2E2-X18MB2
E2E/E2E2 Cylindrical Proximity Sensor
5
DC 3-wire/Connector Models
Size
Shielded
Sensing distance
M12
M18
M30
Unshielded
M12
M18
M30
2 mm
5 mm
10 mm
5 mm
10 mm
18 mm
Output configuration
Model
NPN NO
E2E2-X2C1-M1
NPN NC
E2E2-X2C2-M1
PNP NO
E2E2-X2B1-M1
PNP NC
E2E2-X2B2-M1
NPN NO
E2E2-X5C1-M1
NPN NC
E2E2-X5C2-M1
PNP NO
E2E2-X5B1-M1
PNP NC
E2E2-X5B2-M1
NPN NO
E2E2-X10C1-M1
NPN NC
E2E2-X10C2-M1
PNP NO
E2E2-X10B1-M1
PNP NC
E2E2-X10B2-M1
NPN NO
E2E2-X5MC1-M1
NPN NC
E2E2-X5MC2-M1
PNP NO
E2E2-X5MB1-M1
PNP NC
E2E2-X5MB2-M1
NPN NO
E2E2-X10MC1-M1
NPN NC
E2E2-X10MC2-M1
PNP NO
E2E2-X10MB1-M1
PNP NC
E2E2-X10MB2-M1
NPN NO
E2E2-X18MC1-M1
NPN NC
E2E2-X18MC2-M1
PNP NO
E2E2-X18MB1-M1
PNP NC
E2E2-X18MB2-M1
AC 2-wire/Pre-wired Models
Size
Shielded
Unshielded
6
Sensing distance
M12
2 mm
M18
5 mm
Operation mode
Model
NO
E2E2-X2Y1
NC
E2E2-X2Y2
NO
E2E2-X5Y1
NC
E2E2-X5Y2
E2E2-X10Y1
M30
10 mm
NO
NC
E2E2-X10Y2
M12
5 mm
NO
E2E2-X5MY1
M18
10 mm
M30
18 mm
E2E/E2E2 Cylindrical Proximity Sensor
NC
E2E2-X5MY2
NO
E2E2-X10MY1
NC
E2E2-X10MY2
NO
E2E2-X18MY1
NC
E2E2-X18MY2
AC 2-wire/Connector Models
Size
Shielded
Sensing distance
M12
2 mm
M18
5 mm
M30
Unshielded
10 mm
Operation mode
Model
NO
E2E2-X2Y1-M4
NC
E2E2-X2Y2-M4
NO
E2E2-X5Y1-M4
NC
E2E2-X5Y2-M4
NO
E2E2-X10Y1-M4
NC
E2E2-X10Y2-M4
E2E2-X5MY1-M4
M12
5 mm
NO
NC
E2E2-X5MY2-M4
M18
10 mm
NO
E2E2-X10MY1-M4
NC
E2E2-X10MY2-M4
M30
18 mm
NO
E2E2-X18MY1-M4
NC
E2E2-X18MY2-M4
E2E/E2E2 Cylindrical Proximity Sensor
7
Specifications
■ Ratings/Characteristics
E2E
E2E-X@D@ DC 2-wire Models
M8
Size
Type
Item
M12
M18
M30
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
E2E-X2D@
E2E-X4MD@
E2E-X3D@
E2E-X8MD@
E2E-X7D@
E2E-X14MD@
E2E-X10D@
E2E-X20MD@
2 mm ±10%
4 mm ±10%
3 mm ±10%
8 mm ±10%
7 mm ±10%
14 mm ±10%
10 mm ±10%
20 mm ±10%
Set distance (See note 1.) 0 to 1.6 mm
0 to 3.2 mm
0 to 2.4 mm
0 to 6.4 mm
0 to 5.6 mm
0 to 11.2 mm
0 to 8.0 mm
0 to 16.0 mm
Sensing distance
Differential travel
15% max. of sensing distance 10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 8 x 8 x
1 mm
Iron, 20 x 20 x Iron,12 x 12 x Iron,30 x 30 x Iron, 18 x 18 x Iron, 30 x 30 x Iron,30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
Response speed (See
note 2.)
1.0 kHz
1.5 kHz
1.0 kHz
0.8 kHz
0.5 kHz
0.4 kHz
0.4 kHz
0.1 kHz
Power supply voltage
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Leakage current
0.8 mA max.
Control
output
3 to 100 mA
Diagnostic output: 50 mA for -D1(5)S models
Load
current
Residual
3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.)
voltage
(See note 3.)
Indicator
D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing Charts.
Diagnostic output delay
0.3 to 1 s
Protection circuits
Surge suppressor, output load short-circuit protection (for control and diagnostic output)
Ambient temperature
Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±15% max. of sensing
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
distance at 23°C in the
temperature range of –25°C to
70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s2 10 times each in X,
Y, and Z directions
Degree of protection
IEC 60529 IP67 (Pre-wired models, pre-wired connector models: in-house standard for oil resistance (former JEM standard
equivalent to IP67g)) (See note 4.)
1,000 m/s2 10 times each in X, Y, and Z directions
Connection method
Pre-wired models (standard length: 2 m), connector models, pre-wired connector models (standard length: 0.3 m)
Weight
(packed
state)
Pre-wired
models
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 175 g
Pre-wired
connector
models
---
Approx. 40 g
Approx. 70 g
Approx. 110 g
Connector
models
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Material
Accessories
Instruction manual
Note 1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. The residual voltage of each E2E model with the model number suffix “-M1J-T” is 5 V. When connecting an E2E model with the suffix “M1J-T” to a device, make sure that the device can withstand the residual voltage.
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
8
E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@E@/F@ DC 3-wire Models
M8
Size
Type
Item
Shielded
M12
Unshielded
E2E-X1R5E@/ E2E-X2ME@/
F@
F@
M18
M30
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
E2E-X2E@/
F@
E2E-X5ME@/
F@
E2E-X5E@/
F@
E2E-X10ME@/
F@
E2E-X10E@/
F@
E2E-X18ME@/
F@
Sensing distance
1.5 mm ±10% 2 mm ±10%
2 mm ±10%
5 mm ±10%
5 mm ±10%
10 mm ±10%
10 mm ±10%
18 mm ±10%
Set distance
0 to 1.2 mm
0 to 1.6 mm
0 to 4.0 mm
0 to 4.0 mm
0 to 8.0 mm
0 to 8.0 mm
0 to 14.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 8 x 8 x
1 mm
Iron, 12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
Response speed (See
note 1.)
2.0 kHz
0.8 kHz
Power supply voltage
(operating voltage
range) (See note 2.)
12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.
Current consumption
13 mA max.
Control
output
0 to 1.6 mm
1.5 kHz
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
Load current 200 mA max.
(See note 2.)
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicator
Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
E1 F1 Models: NO
E2 F2 Models: NC
For details, refer to Timing Charts.
Protection circuits
Power supply reverse polarity protection, surge suppressor, output load short-circuit protection
Ambient temperature
(See note 2)
Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no icing)
Temperature influence
±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s2 10 times each in X, Y, 1,000 m/s2 10 times each in X, Y, and Z directions
and Z directions
Degree of protection
IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note
3.)
Connection method
Pre-wired models (standard length 2 m), connector models
Weight
(packed
state)
Pre-wired
models
Approx. 65 g
Approx. 75 g
Approx. 150 g
Approx. 195 g
Connector
models
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Material
Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. When using an E2E with an M8 connector at an ambient temperature range between 70°C and 85°C, supply 10 to 30 VDC to the E2E and
make sure that the E2E has a control output of 100 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
9
E2E-C@C@/B@, E2E-X1C@/B@ DC 3-wire Models
3 dia.
Size
4 dia.
Type
M5
5.4 dia.
E2E-X1C@/B@
E2E-C1C@/B@
Shielded
Item
E2E-CR6C@/B@
E2E-CR8C@/B@
Sensing distance
0.6 mm ±15%
0.8 mm ±15%
1 mm ±15%
Set distance
0 to 0.4 mm
0 to 0.5 mm
0 to 0.7 mm
Differential travel
15% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object
Iron: 3 x 3 x 1 mm
Iron: 5 x 5 x 1 mm
Response speed (See note.)
2 kHz
3 kHz
Power supply voltage
(operating voltage range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption
10 mA max.
Control output
17 mA max.
Load current
Open-collector output
Open-collector output 100 mA max. (at 30 VDC max.)
80 mA max. (at 30 VDC
max.)
Residual
voltage
1 V max. (Load current: 2 V max. (Load current: 100 mA, Cable length: 2 m)
80 mA, Cable length:
2 m)
Indicator
Operation indicator (red LED)
Operation mode (with sensing object
approaching)
C1/-B1 Models:NO
C2/-B2 Models:NC
For details, refer to Timing Charts.
Protection circuits
Power supply reverse polarity protection, surge suppressor
Ambient temperature
Operating/Storage: –25°C to 70°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95%
Temperature influence
±15% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±5% max. of sensing
distance in the rated
voltage range ±10%
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
500 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP66
Connection method
Pre-wired models
(Standard length 2 m)
±2.5% max. of sensing distance in the rated voltage range ±15%
IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former
JEM standard equivalent to IP67g)) (See note 2.)
Weight
(packed state)
Material
Pre-wired
models
Approx. 60 g
Connector
models
---
Case
Stainless steel (SUS303)
Pre-wired models (Standard length 2 m), connector models
Approx. 12 g
Approx. 15 g
---
Brass-nickel plated
Sensing surface Heat-resistant ABS
Clamping nuts
---
Toothed washer --Accessories
Brass-nickel plated
Iron-zinc plated
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
10
E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@Y@ AC 2-wire Models
M8
Size
Type
Item
M12
Unshielded
Shielded
E2E-X1R5Y@ E2E-X2MY@
M18
Shielded
Unshielded
Shielded
Unshielded
E2E-X2Y@
E2E-X5MY@
E2E-X5Y@
E2E-X10MY@
M30
Shielded
Unshielded
E2E-X10Y@ E2E-X18MY@
Sensing distance
1.5 mm ±10% 2 mm ±10%
2 mm ±10%
5 mm ±10%
5 mm ±10%
10 mm ±10% 10 mm ±10% 18 mm ±10%
Set distance
0 to 1.2 mm
0 to 1.6 mm
0 to 4.0 mm
0 to 4.0 mm
0 to 8.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 8 x 8 x
1 mm
Response speed
25 Hz
Power supply
voltage (operating
voltage range)
(See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current
1.7 mA max.
Control Load
output current
(See note
2.)
5 to 100 mA
Residual
voltage
Indicator
0 to 1.6 mm
0 to 8.0 mm
0 to 14.0 mm
Iron,12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
5 to 200 mA
5 to 300 mA
Refer to Engineering Data.
Operation indicator (red LED)
Operation mode
Y1 Models: NO
(with sensing object Y2 Models: NC
approaching)
For details, refer to Timing Charts.
Protection circuit
Surge suppressor
Ambient temperature Operating/Storage: –25°C to Operating/Storage: –40°C to 85°C (with no icing or condensation)
(See notes 1 and 2.) 70°C (with no icing or
condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±10% max. of sensing
±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
distance at 23°C in the
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
temperature range of –25°C
to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case (2,000 VAC for M8 Models)
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s2 10 times each in X, 1,000 m/s2 10 times each in X, Y, and Z directions
Y, and Z directions
Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See
note 3.)
Connection method
Pre-wired models (standard length 2 m), connector models
Weight Pre-wired
(packed models
state)
Connector
models
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 175 g
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Material Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories
Instruction manual
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is over –25°C.
2. When using an M18-or M30-sized E2E within an ambient temperature of 70°C to 85°C, make sure that the E2E has a control output of 5
to 200 mA max.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
11
AC/DC 2-wire Models
Size
M12
M18
Type
M30
Shielded
Item
E2E-X3T1
E2E-X7T1
E2E-X10T1
Sensing distance
3 mm ±10%
7 mm ±10%
10 mm ±10%
Set distance
0 to 2.4 mm
0 to 5.6 mm
0 to 8.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object
Iron, 12 x 12 x 1 mm
Iron, 18 x 18 x 1 mm
Iron, 30 x 30 x 1 mm
Response speed
(See note 1.)
DC
1.0 kHz
0.5 kHz
0.4 kHz
AC
25 Hz
Power supply voltage
24 to 240 VDC (20 to 264 VDC)/48 to 240 VAC (40 to 264 VAC)
(operating voltage range) (See note 2.)
Leakage current
Control output
1 mA DC max., 2 mA AC max.
Load current
5 to 100 mA
Residual
voltage
6.0 VDC max. (Load current: 100 mA, Cable length: 2 m)
10 VAC max. (Load current: 5 mA, Cable length: 2 m)
Indicator
Operation indicator (red LED), setting indicator (green LED)
Operation mode
(with sensing object approaching)
NO
For details, refer to Timing Charts.
Protection circuits
Output load short-circuit protection (at 20 to 40 VDC), Surge suppressor
Ambient temperature
Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired Models (standard length 2 m)
Weight (packed state)
Material
Approx. 80 g
Case
Approx. 140 g
Approx. 190 g
Brass-nickel plated
Sensing surface PBT (polybutylene terephthalate)
Clamping nuts
Brass-nickel plated
Toothed washer Iron-zinc plated
Accessories
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. Power supply voltage waveform: Use a sine wave for the power supply. Using a rectangular AC power supply may result in faulty reset.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
12
E2E/E2E2 Cylindrical Proximity Sensor
E2E2
E2E2-X@D@ DC 2-wire Models
M12
Size
Type
Item
M18
M30
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
E2E2-X3D@
E2E2-X8MD@
E2E2-X7D@
E2E2-X14MD@
E2E2-X10D@
E2E2-X20MD@
Sensing distance
3 mm ±10%
8 mm ±10%
7 mm ±10%
14 mm ±10%
10 mm ±10%
20 mm ±10%
Set distance
(See note 1.)
0 to 2.4 mm
0 to 6.4 mm
0 to 5.6 mm
0 to 11.2 mm
0 to 8.0 mm
0 to 16.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1 mm
Response speed (See 1.0 kHz
note 2.)
Iron, 30 x 30 x
1 mm
Iron, 18 x 18 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 54 x 54 x
1 mm
0.8 kHz
0.5 kHz
0.4 kHz
0.4 kHz
0.1 kHz
Power supply voltage
(operating voltage
range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current
0.8 mA max.
Control
output
Load
current
3 to 100 mA
Residual
voltage
3.0 V max. (Load current: 100 mA, Cable length: 2 m)
Indicator
D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing charts.
Protection circuits
Surge suppressor, output load short-circuit protection
Ambient temperature
Operating/Storage: –25°C to 70°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 M Ω min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length 2 m)
Weight (packed state) Approx. 65 g
Material
Case
Brass
Sensing
surface
PBT (polybutylene terephthalate)
Approx. 150 g
Approx. 210 g
Clamping Brass-nickel plated
nuts
Toothed
washer
Accessories
Iron-zinc plated
Instruction manual
Note 1. Use the E2E2 within the range in which the setting indicator (green LED) is lit (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
13
E2E2-X@C@/B@ DC 3-wire Models
M12
Size
Type
Item
M18
M30
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
E2E2-X2C@/
B@
E2E2-X5MC@/B@
E2E2-X5C@/
B@
E2E2-X10MC@/
B@
E2E2-X10C@/
B@
E2E2-X18MC@/
B@
Sensing distance
2 mm ±10%
5 mm ±10%
5 mm ±10%
10 mm ±10%
10 mm ±10%
18 mm ±10%
Set distance
0 to 1.6 mm
0 to 4.0 mm
0 to 4.0 mm
0 to 8.0 mm
0 to 8.0 mm
0 to 14.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1 mm
Iron, 15 x 15 x
1 mm
Iron, 18 x 18 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 54 x 54 x
1 mm
Response speed (See
note 1.)
1.5 kHz
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
Power supply voltage
(operating voltage
range) (See note.)
12 to 24 VDC (10 to 55 VDC), ripple (p-p): 10% max.
Current consumption
13 mA max.
Control
output
Load
current
200 mA max., open collector (55 VDC max.)
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicator
Operation indicator (red LED)
Operation mode (with
sensing object
approaching)
B1/C1 Models: NO
B2/C2 Models: NC
For details, refer to Timing Charts.
Protection circuits
Surge suppressor, output load short-circuit protection, power supply reverse polarity protection
Ambient temperature
Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 M Ω min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length: 2 m)
Weight (packed state)
Approx. 75 g
Material
Case
Brass
Sensing
surface
PBT (polybutylene terephthalate)
Approx. 160 g
Approx. 220 g
Clamping Brass-nickel plated
nuts
Toothed
washer
Accessories
Iron-zinc plated
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. An unsmoothed full-wave rectification power supply of 24 VDC ±20% (average value) can be used.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
14
E2E/E2E2 Cylindrical Proximity Sensor
E2E2-X@Y@ AC 2-wire Models
M12
Size
Type
Item
M18
M30
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
E2E2-X2Y@
E2E2-X5MY@
E2E2-X5Y@
E2E2-X10MY@
E2E2-X10Y@
E2E2-X18MY@
Sensing distance
2 mm ±10%
5 mm ±10%
5 mm ±10%
10 mm ±10%
10 mm ±10%
18 mm ±10%
Set distance
0 to 1.6 mm
0 to 4.0 mm
0 to 4.0 mm
0 to 8.0 mm
0 to 8.0 mm
0 to 14.0 mm
Differential travel
10% max. of sensing distance
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 12 x 12 x
1 mm
Iron, 15 x 15 x
1 mm
Iron, 18 x 18 x
1 mm
Response speed
25 Hz
Power supply voltage
(operating voltage
range) (See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current
1.7 mA max.
Control
output
Load
current
(See note
2.)
5 to 200 mA
Residual
voltage
Refer to Engineering Data.
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
5 to 300 mA
Indicator
Operation indicator (red LED)
Operation mode (with
sensing object
approaching)
Y1 Models: NO
Y2 Models: NC
For details, refer to Timing Charts.
Ambient temperature
Operating/Storage: –40°C to 85°C (with no icing or condensation) (See notes 1 and 2.)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance
50 M Ω min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
1,000 m/s2, 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length: 2 m)
Weight (packed state)
Approx. 65 g
Material
Case
Brass
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories
Iron, 54 x 54 x
1 mm
Approx. 150 g
Approx. 210 g
Instruction manual
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is –25°C to 85°C.
2. When using an M18-or M30-sized E2E2 within an ambient temperature of 70°C to 85°C, make sure that the E2E2 has a control output of
5 to 200 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
15
Engineering Data
E2E
Operating Range (Typical)
Shielded Models
E2E-X@D@
E2E-X@T1
E2E-X@E@/F@
E2E-X@Y@
8
E2E-X7
6
E2E-X3
E2E-X2
Y
4
X
2
−15
−10
−5
0
5
E2E-X10
10
Y
8
6
E2E-X5
E2E-X2
4
E2E
-X1R5
2
0
−15
10
15
20
Distance Y (mm)
X
−10
−5
0
5
10
15
Distance Y (mm)
E2E-X@ME@/F@
E2E-X@MY@
30
30
20
E2E-X20M
15
10
Y
X
E2E-X8M
5
0
−30
16
E2E-X14M
E2E-X4M
−20
−10
0
10
20
30
Distance Y (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Y
25
X
25
20
E2E-X18M
15
E2E-X10M
10
E2E-X5M
E2E-X2M
5
0
−30
Y
1.4
X
1.2
E2E-X1/E2E-C1
1.0
0.8
E2E-CR8
0.6
E2E-CR6
0.4
0.2
Unshielded Models
E2E-X@MD@
Sensing distance X (mm)
E2E-X10
10
0
−20
1.6
12
Sensing distance X (mm)
Sensing distance X (mm)
12
E2E-C@C@/B@
E2E-X@C@/B@
−20
−10
E2E/E2E2 Cylindrical Proximity Sensor
0
10
20
30
Distance Y (mm)
0
−3.0
−2.0
−1.0
0
1.0
2.0
3.0
Distance Y (mm)
Leakage Current (Typical)
E2E-X2D1-N
E2E-X7D1-N
E2E-X@T1
DC/AC
AC power supply
Proximity
Sensor
(when
OFF)
Leakage current (mA)
E2E-X10D1-N
E2E-X3D1-N
Leakage current (mA)
E2E-X@Y@
Leakage current (mA)
E2E-X@D@
Protective
resistance
AC power
supply
Supply voltage (V)
DC power supply
Supply voltage (V)
Supply voltage (V)
Residual Output Voltage (Typical)
E2E-X@T1
E2E-X@D@
200 VAC
4
E2E-X@D1-M1J-T
3
E2E-X@D@
2
1
0
1
3
5
10
30
50
Residual output voltage (V)
Residual output voltage (V)
5
100 VAC
24 VDC
100
Load current (mA)
Load current (mA)
E2E-X@Y@
24 VAC
100 VAC
200 VAC
Residual output voltage
Residual output voltage
Proximity
Sensor
24 VAC
Residual
load
voltage
OFF
Load current (mA)
Proximity
Sensor
100 VAC
Residual
load
voltage
OFF
Load current (mA)
Load voltage VL (V)
Load voltage VL (V)
Load voltage VL (V)
Residual output voltage
Proximity
Sensor
200 VAC
Residual
load
voltage
OFF
Load current (mA)
E2E/E2E2 Cylindrical Proximity Sensor
17
Sensing Distance vs. Sensing Object (Typical)
E2E-X2D@
E2E-X3D@
E2E-X3T1
E2E-X7D@
E2E-X7T1
t = 1 mm
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Iron
Sensing distance (mm)
Iron
Sensing distance (mm)
Sensing distance (mm)
t = 1 mm
Side length of sensing
object d (mm)
E2E-X10D@
E2E-X10T1
Stainless steel
(SUS304)
t = 1 mm
Side length of sensing
object d (mm)
E2E-X4MD@
E2E-X8MD@
Copper
t = 1 mm
Side length of sensing
object d (mm)
E2E-X14MD@
t = 1 mm
Iron
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
Sensing distance (mm)
Sensing distance (mm)
Stainless
steel
(SUS304)
Brass
Aluminum
Sensing distance (mm)
t = 1 mm
Iron
Side length of sensing
object d (mm)
E2E-X20MD@
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
E2E-X1R5E@/F@
E2E-X1R5Y@
t = 1 mm
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
Side length of sensing
object d (mm)
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
t = 1 mm
Side length of sensing
object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
Sensing distance (mm)
Iron
Iron
Sensing distance (mm)
Sensing distance (mm)
Iron
Side length of sensing
object d (mm)
t = 1 mm
18
Brass
Aluminum
Copper
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Side length of sensing
object d (mm)
E2E-X2E@/F@
E2E-X2Y@
E2E-X5E@/F@
E2E-X5Y@
E2E-X10E@F@
E2E-X10Y@
t = 1 mm
Brass
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Aluminum
Side length of sensing object d (mm)
E2E-X2ME@/F@
E2E-X2MY@
Sensing distance X (mm)
Stainless steel
(SUS304)
Sensing distance X (mm)
Sensing distance X (mm)
t = 1 mm
Iron
Side length of sensing object d (mm)
E2E-X5ME@/F@
E2E-X5MY@
Iron
Stainless steel
(SUS304)
Brass
t = 1 mm
Aluminum
Side length of sensing object d (mm)
E2E-X10ME@/F@
E2E-X10MY
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm Copper
Iron
Stainless steel
(SUS304)
Brass
Sensing distance X (mm)
Iron
Sensing distance X (mm)
Sensing distance X (mm)
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
t = 1 mm
Aluminum
Side length of sensing object d (mm)
E2E-X18ME@/F@
E2E-X18MY@
Side length of sensing object d (mm)
Side length of sensing object d (mm)
E2E-CR8@@
E2E-CR6@@
0.7
t = 1 mm
Brass
Aluminum
0.6
Iron
0.5
Stainless
steel
(SUS304)
Aluminum
0.3
0.2
@d
X
t = 1 mm
Iron
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
0.1
0
Side length of sensing object d (mm)
Brass
0.4
Sensing distance X (mm)
Stainless steel
(SUS304)
Sensing distance X (mm)
Sensing distance X (mm)
t = 1 mm
Iron
Aluminum
5
10
15
20
Side length of sensing object d (mm)
Side length of sensing object d (mm)
Sensing distance X (mm)
E2E-X1@@
E2E-C1@@
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Side length of sensing object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
19
E2E2
Operating Range (Typical)
Shielded Models
E2E2-X@D@
E2E2-X@C@/B@
E2E2-X@Y@
3.0
8
E2E2-X7
6
4
Y
E2E2-X3
X
2
0
−20
−15
−10
−5
0
5
10
15
2.5
Y
2.0 X
E2E2-X2
1.5
1.0
0.5
0
20
12
Sensing Distance X (mm)
E2E2-X10
10
Sensing Distance X (mm)
Sensing Distance X (mm)
12
-15
-10
-5
0
5
Distance Y (mm)
Y
8
X
6
E2E2-X5
4
2
0
10
15
Distance Y (mm)
E2E2-X10
10
−15
−10
−5
0
5
15
10
Distance Y (mm)
Unshielded Models
E2E2-X@MD@
E2E2-X@MC@/B@
E2E2-X@MY@
6
30
30
E2E2-X20M
15
E2E2-X14M
10
Y
E2E2-X8M
X
5
0
−30
−20
−10
0
10
5
E2E2-X5M
Y
4
X
3
2
1
0
20
30
Distance Y (mm)
-8
-6
-4
-2
0
2
4
E2E2-X@D@
E2E2-X@Y@
Leakage current (mA)
Leakage current (mA)
20
6
8
Distance Y (mm)
Leakage Current (Typical)
Supply voltage (V)
Sensing Distance X (mm)
20
Sensing Distance X (mm)
Sensing Distance X (mm)
Y
25
Proximity
Sensor
(when
OFF)
Protective
resistance
AC
power
supply
Supply voltage (V)
E2E/E2E2 Cylindrical Proximity Sensor
X
25
20
E2E2-X18M
15
E2E2-X10M
10
5
0
−30
−20
−10
0
10
20
30
Distance Y (mm)
Residual Output Voltage (Typical)
Residual output voltage (V)
E2E2-X@D@
Load current (mA)
100 VAC
Proximity
Sensor
24 VAC
Residual
load
voltage
OFF
200 VAC
Residual output voltage
Residual output voltage
Proximity
Sensor
100 VAC
Residual
load
voltage
Residual load voltage V (V)
Residual output voltage
Residual load voltage V (V)
Residual load voltage V (V)
E2E2-X@Y@
24 VAC
OFF
Proximity
Sensor
200 VAC
Residual
load
voltage
OFF
Load current (mA)
Load current (mA)
Load current (mA)
Sensing Distance vs. Sensing Object (Typical)
E2E2-X3D@
E2E2-X7D@
E2E2-X10D@
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
t= 1 mm
Side length of sensing
object d (mm)
Sensing distance (mm)
Iron
Sensing distance (mm)
Sensing distance (mm)
t= 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
t= 1 mm
Side length of sensing
object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
21
E2E2-X8MD@
E2E2-X14MD@
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Sensing distance (mm)
Iron
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Sensing distance (mm)
t=1 mm
t=1 mm
Sensing distance (mm)
E2E2-X20MD@
Side length of sensing
object d (mm)
E2E2-X2C@/B@
E2E2-X2Y@
Iron
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
t=1 mm
Side length of sensing
object d (mm)
E2E2-X5C@/B@
E2E2-X5Y@
E2E2-X10C@/B@
E2E2-X10Y@
t=1 mm
Brass
Aluminum
Iron
Stainless steel
(SUS304)
Brass
E2E2-X10MC@/B@
E2E2-X10MY@
Brass
t=1 mm
Aluminum
E2E2-X18MC@/B@
E2E2-X18MY@
Iron
Stainless steel
(SUS304)
Brass
Iron
Stainless steel (SUS304)
Brass
t-=1 mm
Aluminum
Sensing distance (mm)
t-=1 mm
Sensing distance (mm)
Sensing distance (mm)
Stainless steel (SUS304)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
t = 1 mm
Iron
Stainless steel (SUS304)
Brass
Aluminum
Aluminum
Side length of sensing
object d (mm)
22
Iron
Aluminum
Side length of sensing
object d (mm)
E2E2-X5MC@/B@
E2E2-X5MY@
Sensing distance (mm)
Stainless steel (SUS304)
Sensing distance (mm)
Sensing distance (mm)
t = 1 mm
Iron
Side length of sensing
object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
Side length of sensing
object d (mm)
Output Circuits and Timing Charts
■ Output Circuits
E2E
E2E-X@D@ DC 2-wire Models
E2E-X@D1
Without Diagnostic Output
E2E-X@D1-M1J-T
No Polarity
1
4
Load
Brown
Proximity
sensor
main
circuit
E2E-X@D1S
With Diagnostic Output
Proximity
sensor
main
circuit
4
Load
Load
(0 V)
Load
Proximity
sensor
main
circuit
3
Blue
4 Brown
Orange (diagnostic
output)
2
0V
0V
Blue 3
Note: 1. The load can be connected to
Note: 1. The load can be connected to
either the +V or 0 V side.
either the +V or 0 V side.
2. The pin numbers in the above diagram
2. The E2E-X@D1-M1J-T has no
are for the -M@G(J). For the -M1, pin 4
polarity. Therefore, terminals 3
is +V and pin 3 is 0 V.
and 4 have no polarity.
0V
Note: Connect both the loads to the +V
side of the control output and
diagnostic output.
E2E-X@D2
Without Diagnostic Output
1
Load
Brown
Proximity
sensor
main
circuit
2
Blue
0V
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above
diagram are for the -M@G.
For -M1 models, pin 2 is +V
and pin 3 is 0 V.
DC 3-wire Models
E2E-X@E@
NPN Output
E2E-X@F@
PNP Output
Brown 1
Brown 1
100 Ω
Proximity
sensor
main
circuit
**
Constant
current*
Proximity
sensor
main
circuit
Load
Black 4
(or 2)**
Blue 3
Black 4
(or 2)***
Load
*
100 Ω
* Constant current output is 1.5 to 3 mA.
** Pin 4 is an NO contact, and pin 2 is an NC contact.
E2E-C/X@C@
NPN Open-collector Output
0V
Blue 3
0V
* Constant current output is 1.5 to 3 mA.
** When connecting to a Tr circuit.
*** Pin 4 is an NO contact, and pin 2 is an NC contact.
E2E-C/X@B@
PNP Open-collector Output
Brown 1
Brown 1
100 Ω
Load
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Black 4
Output
Black 4
Load
Blue 3
0V
* E2E-CR6@ has no 100-Ω resistance.
100 Ω
Blue 3
0V
* E2E-CR6@ has no 100-Ω resistance.
E2E/E2E2 Cylindrical Proximity Sensor
23
E2E-X@Y@ AC 2-wire Models
E2E-X@T1 AC/DC 2-wire Models
Brown
Load
Brown 3 (or 1)
Load
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
24 to 240 VDC
48 to 240 VAC
Power
supply
Blue
Blue 4 (or 2)
Note: The load can be connected to either
the +V or 0 V side.
There is no need to be concerned
about the polarity (Brown/Blue) of the
Proximity Sensor.
Note: For connector models, the
connection between pins 3 and 4
uses an NO contact, and the
connection between pins 1 and 2
uses an NC contact.
E2E2
E2E2-X@D@ DC 2-wire Models
Load
Brown
Proximity
sensor
main
circuit
Blue
0V
Note: The load can be connected to either the +V or 0 V side.
E2E2-X@C@ DC 3-wire Models
E2E2-X@B@ DC 3-wire Models
Brown 1
Brown 1
+V
100 Ω
+V
Load
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Black
4 (or 2)*
Black 4 (or 2)*
Load
100 Ω
Blue 3
0V
* Pin 4 is an NO contact, and pin 2 is an NC contact.
0V
* Pin 4 is an NO contact, and pin 2 is an NC contact.
E2E2-X@Y@ DC 2-wire Models
Brown 2
Load
Proximity
sensor
main
circuit
Blue 3
24
Blue 3
E2E/E2E2 Cylindrical Proximity Sensor
■ Timing Charts
E2E
E2E-X@D@ DC 2-wire Models
E2E-X@T1 AC/DC 2-wire Models
E2E-X@D1
E2E-X@T1
NO Models
E2E-X@D2
NC Models
Set
position
Unstable
Stable sensing
sensing area area
Non-sensing
area
Proximity
Sensor
Sensing
object
Non-sensing area
Sensing area
Proximity
Sensor
ON
OFF
ON
OFF
ON
OFF
Setting
indicator (green)
Rated sensing
distance
Rated sensing
distance
Sensing
object
Operation
indicator (red)
ON
Control
output
ON
OFF
OFF
Operation
indicator (red)
Control
output
E2E-X@D1S
Non-sensing
area
Set
position
Unstable
Stable sensing
sensing area area
Proximity
Sensor
Rated sensing
distance
Sensing
object
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Setting
indicator (green)
Operation
indicator (red)
Note: The diagnostic output of the E2E-X@D1S is
ON when there is a coil burnout or the
sensing object is located in the unstable
sensing range for 0.3 s or more.
Control
output
Diagnostic
output (see note)
DC 3-wire Models
E2E-X@E@
NPN Output
E2E-X@F@
PNP Output
Sensing
object
Yes
No
ON
Operation
indicator (red) OFF
ON
Control output
between brown and black lines OFF
H
Output voltage
L
between black and blue lines
Sensing Yes
object No
Operation
ON
indicator (red) OFF
Control output
ON
between black and blue lines OFF
Output voltage
ON
between black and blue lines OFF
E2E-C/X@C@/B@
NPN/PNP Open-collector Output
Yes
No
Operation
ON
indicator (red) OFF
Sensing
object
Control
output
ON
OFF
E2E/E2E2 Cylindrical Proximity Sensor
25
E2E-X@Y@ AC 2-wire Models
Yes
No
Operation
ON
indicator (red) OFF
Sensing
object
Control
output
ON
OFF
E2E2
E2E2-X@D@ DC 2-wire Models
Non-sensing
area
Set
position
Unstable
Stable sensing
sensing area area
NC Models
Proximity
Sensor
Sensing
object
Rated sensing
distance
ON
Setting
indicator (green)
ON
OFF
Operation
indicator (red)
ON
OFF
Operation
indicator (red)
ON
Control
output
ON
Control
output
NPN/PNP Open-collector Output
Control output
Yes
No
ON
OFF
ON
OFF
E2E2-X@Y@ AC 2-wire Models
Sensing object
Operation
indicator (red)
Control output
26
Proximity
Sensor
OFF
E2E2-X@C@/B@ DC 3-wire Models
Operation
indicator (red)
Sensing area
Sensing
object
OFF
Sensing object
Non-sensing area
Rated sensing
distance
NO Models
Yes
No
ON
OFF
ON
OFF
E2E/E2E2 Cylindrical Proximity Sensor
OFF
Installation
■ Connection
E2E
E2E-X@D@
DC 2-wire Models
(Without Diagnostic Output)
E2E-X@D1S
DC 3-wire Models
(With Diagnostic Output)
E2E-X@D1-M1J-T
DC 2-wire Models
(No Polarity)
E2E-X@Y@
AC 2-wire Models
E2E-X@Y@
AC 2-wire Models
Brown
E2E-X@T1
AC/DC 2-wire Models
Brown
Orange
Load
Blue
Load
Brown
Load
Power
supply
Note: The control output and
diagnostic output share the
negative common terminal.
Therefore, the loads must be
connected to the positive
sides of the control output
and diagnostic output.
Blue
Brown
Power
supply
Blue
E2E-X@T1
AC/DC 2-wire Models
Load
Power
supply
Blue
Note: There is no need to be
concerned about the polarity
(Brown/Blue) of the
Proximity Sensor.
Load
Note: The load can be connected
as shown above.
Connected to PC
E2E-X@D@
DC 2-wire Models
E2E-X@E@
DC 3-wire Models
Brown
Brown
Black
Blue
Blue
24 VDC
24 VDC
Connected to Relay Load
E2E-X@D@
DC 2-wire Models
E2E-X@E@
DC 3-wire Models
Brown
24 VDC
Blue
E2E-X@F@
DC 3-wire Models
Brown
Brown
Black
Black
Blue
Blue
E2E/E2E2 Cylindrical Proximity Sensor
27
E2E2
E2E2-X@D@
DC 2-wire Models
E2E2-X@Y@
AC 2-wire Models
Brown
Brown
Load
Power
supply
Power
supply
Blue
Blue
Load
Note: The load can be connected as shown in the above diagrams.
Connected to PC
E2E2-X@D@
DC 2-wire Models
E2E2-X@C@
DC 3-wire Models
Brown
Brown
Black
Blue
24 VDC
28
E2E/E2E2 Cylindrical Proximity Sensor
Blue
24 VDC
■ Pin Arrangement
E2E-X@D@-M@ DC 2-wire Models
Connector
SelfOperadiagnostic
tion
output
mode
M12
No
NO
Applicable
models
Pin arrangement
E2E-X@D1-M1G@
(See note.)
Load
Load
Note: Terminals 2 and 3 are not used.
E2E-X@D1-M1J-T
Load
or
or
Load
Note: 1. Terminals 1 and 2 are not used.
2. Terminals 3 and 4 has no
polarity.
E2E-X@D1-M1
Load
Load
Note: Terminals 1 and 2 are not used.
NC
E2E-X@D2-M1G
(See note.)
Load
Load
Note: Terminals 3 and 4 are not used.
E2E-X@D2-M1
Load
Load
Note: Terminal 1 is not used.
Yes
NO
E2E-X@D1S-M1
(Self-diagnostic output)
Load
Load
M8
No
NO
Note: Terminals 1 is not used.
E2E-X@D1-M3G
Load
Load
Note: Terminals 2 and 3 are not used.
NC
E2E-X@D2-M3G
Load
Load
Note: Terminals 3 and 4 are not used.
Note: The above pin arrangements conform to IEC standards.
E2E/E2E2 Cylindrical Proximity Sensor
29
E2E-X@E/F@-M@ DC 3-wire Models
Connector
M12
Operation mode
NO
Applicable models
Pin arrangement
E2E-X@E1-M1
Load
Note: Terminal 2 is not used.
Load
Note: Terminal 2 is not used.
E2E-X@F1-M1
NC
E2E-X@E2-M1
Load
Note: Terminal 4 is not used.
E2E-X@F2-M1
Note: Terminal 4 is not used.
Load
M8
NO
E2E-X@E1-M3
Note: Terminal 2 is not used.
Load
E2E-X@F1-M3
Note: Terminal 2 is not used.
Load
NC
E2E-X@E2-M3
Note: Terminal 4 is not used.
Load
E2E-X@F2-M3
Note: Terminal 4 is not used.
Load
30
E2E/E2E2 Cylindrical Proximity Sensor
E2E-CR8C@/CR8B@/X1C@/X1B@-M5 DC 3-wire Models
Connector
M8-3pin
Operation mode
Applicable models
NO/NC
Pin arrangement
E2E-CR8C@-M5
E2E-X1C@-M5
DC
4
1
3
Load
NO/NC
E2E-CR8B@-M5
E2E-X1B@-M5
DC
4
1
3
Load
E2E-X@Y@-M1 AC 2-wire Models
Operation mode
Applicable models
NO
Pin arrangement
E2E-X@Y1-M1
Load
Load
Note: Terminals 1 and 2 are not used.
NC
E2E-X@Y2-M1
Load
Load
Note: Terminals 3 and 4 are not used.
Precautions
Mounting
Refer to the following to mount the E2E-CR6, -CR8 and E2E-C1
non-screw models.
Do not tighten the nut with excessive force. A washer must be used
with the nut.
E2E-CR6:
9 to 21 mm
E2E-CR8, -C1: 8 to 21 mm
M3 hole
No screw is provided
with the E2E-CR6,
-CR8 or E2E-C1.
Shielded Model
Unshielded Model
Tighten the screw to a torque of 0.2 N·m maximum to secure the
E2E-CR6, -CR8 and a torque of 0.4 N·m maximum to secure the
E2E-C1.
Part B Part A
Part B Part A
Note: The table below shows the tightening torques for part A and
part B nuts. In the previous examples, the nut is on the sensor
head side (part B) and hence the tightening torque for part B
applies. If this nut is in part A, the tightening torque for part A
applies instead.
Model
Part A
Length
M5
M8
Part B
Torque
Torque
1 N·m
Shielded
9 mm
Unshielded
3 mm
M12
30 N·m
M18
70 N·m
M30
180 N·m
9 N·m
12 N·m
E2E/E2E2 Cylindrical Proximity Sensor
31
Influence of Surrounding Metal
When mounting the E2E within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these
distances may cause deterioration in the performance of the sensor.
d dia.
Model
Shielded
E2E-X@D@
DC 2-wire
E2E-X@T1
AC/DC 2-wire
E2E2-X@D@
DC 2-wire
Unshielded
E2E-X@E@
E2E-X@F@
DC 3-wire
Shielded
E2E-X@Y@
AC 2-wire
E2E2-X@B@
E2E2-X@C@
DC 3-wire
Unshielded
E2E2-X@Y@
AC 2-wire
Item
l
32
Shielded
M12
M18
M30
d
8 mm
D
0 mm
m
4.5 mm
8 mm
20 mm
40 mm
n
12 mm
18 mm
27 mm
45 mm
l
12 mm
15 mm
22 mm
30 mm
d
24 mm
40 mm
70 mm
90 mm
D
12 mm
15 mm
22 mm
30 mm
12 mm
18 mm
30 mm
m
8 mm
20 mm
40 mm
70 mm
n
24 mm
40 mm
70 mm
90 mm
l
0 mm
12 mm
18 mm
30 mm
d
8 mm
D
0 mm
m
4.5 mm
8 mm
20 mm
40 mm
n
12 mm
18 mm
27 mm
45 mm
l
6 mm
15 mm
22 mm
30 mm
d
24 mm
40 mm
55 mm
90 mm
D
6 mm
15 mm
22 mm
30 mm
m
8 mm
20 mm
40 mm
70 mm
n
24 mm
36 mm
54 mm
90 mm
Model
E2E-X@C@
E2E-X@B@
E2E-C@C@
E2E-C@B@
DC 3-wire
M8
0 mm
Item
3 dia.
l
0 mm
d
3 mm
D
0 mm
m
n
4 dia.
M5
5.4 dia.
4 mm
5 mm
5.4 mm
2 mm
2.4 mm
3 mm
3 mm
6 mm
6 mm
8 mm
8 mm
E2E/E2E2 Cylindrical Proximity Sensor
Relationship between Sizes and Models
E2E
Model
3 dia.
Shielded
Model No.
E2E-CR6C@
E2E-CR6B@
4 dia.
E2E-CR8C@
E2E-CR8B@
M5
E2E-X1C@
E2E-X1B@
5.4 dia.
E2E-C1C@
E2E-C1B@
M8
M12
M18
M30
Shielded
E2E-X2D@
E2E-X1R5E@/F@
E2E-X1R5Y@
Unshielded
E2E-X4MD@
E2E-X2ME@/F@
E2E-X2MY@
Shielded
E2E-X3D@
E2E-X2E@/F@
E2E-X2Y@
E2E-X3T1
Unshielded
E2E-X8MD@
E2E-X5ME@/F@
E2E-X5MY@
Shielded
E2E-X7D@
E2E-X5E@/F@
E2E-X5Y@
E2E-X7T1
Unshielded
E2E-X14MD@
E2E-X10ME@/F@
E2E-X10MY@
Shielded
E2E-X10D@
E2E-X10E@/F@
E2E-X10Y@
E2E-X10T1
Unshielded
E2E-X20MD@
E2E-X18ME@/F@
E2E-X18MY@
E2E2
Model
M12
M18
M30
Model No.
Shielded
E2E2-X3D@
E2E2-X2C@/B@
E2E2-X2Y@
Unshielded
E2E2-X8MD@
E2E2-X5MC@/B@
E2E2-X5MY@
Shielded
E2E2-X7D@
E2E2-X5C@/B@
E2E2-X5Y@
Unshielded
E2E2-X14MD@
E2E2-X10MC@/B@
E2E2-X10MY@
Shielded
E2E2-X10D@
E2E2-X10C@/B@
E2E2-X10Y@
Unshielded
E2E2-X20MD@
E2E2-X18MC@/B@
E2E2-X18MY@
E2E/E2E2 Cylindrical Proximity Sensor
33
Mutual Interference
When installing two or more Sensors face to face or side by side, ensure that the minimum distances given in the following table are maintained.
B
A
Model
Item
M8
M12
M18
50 (30) mm
M30
Shielded
A
B
15 mm
20 (12) mm
35 (18) mm
70 (35) mm
E2E-X@T1
AC/DC 2-wire
Unshielded
A
80 mm
120 (60) mm
200 (100) mm
300 (100) mm
B
60 mm
100 (50) mm
110 (60) mm
200 (100) mm
A
20 mm
30 (20) mm
50 (30) mm
100 (50) mm
B
15 mm
20 (12) mm
35 (18) mm
70 (35) mm
A
80 mm
120 (60) mm
200 (100) mm
300 (100) mm
B
60 mm
100 (50) mm
110 (60) mm
200 (100) mm
E2E2-X@D@
DC 2-wire
E2E-X@E@
E2E-X@F@
DC 3-wire
E2E-X@Y@
AC 2-wire
Shielded
Unshielded
20 mm
30 (20) mm
E2E-X@D@
DC 2-wire
100 (50) mm
E2E2-X@B@
E2E2-X@C@
DC 3-wire
E2E2-X@Y@
AC 2-wire
Model
E2E-X@B@
E2E-X@C@
E2E-C@B@
E2E-C@C@
DC 3-wire
Shielded
Item
3 dia.
A
20 mm
B
15 mm
Note: Values in parentheses apply to Sensors operating at different frequencies.
34
E2E/E2E2 Cylindrical Proximity Sensor
4 dia.
M5
5.4 dia.
WARNING
This product is not designed or rated for ensuring safety
of persons.
Do not use it for such purposes.
■ Precautions for Safe Use
The colors in parentheses are previous wire colors.
Item
Power supply
Do not impose an excessive voltage on the
E2E/E2E2, otherwise it may explode or burn.
Do not impose 100 VAC on any E2E/E2E2
DC Model, otherwise it may explode or burn.
Examples
DC 3-wire Models
DC 2-wire Models
Brown
Brown
Sensor
Incorrect
Black
Do not short-circuit the load, or the E2E/E2E2
may explode or burn.
The E2E/E2E2’s short-circuit protection
function is valid if the polarity of the supply
voltage imposed is correct and within the
rated voltage range.
Incorrect
Sensor
Blue
Load short-circuit
Load
Load
Blue
DC 3-wire Models (NPN output)
Brown
Load
(Load
shortcircuit)
Sensor
Black
Blue
Incorrect
DC 2-wire Models
The following diagram shows that the load is
short-circuited while the polarity of the supply
voltage imposed on the E2E/E2E2 is wrong,
in which case the E2E/E2E2 may explode or
burn.
Load
Brown
(Load short-circuit)
Incorrect
Sensor
Blue
Wiring
Be sure to wire the E2E/E2E2 and load
correctly, otherwise it may explode or burn.
DC 3-wire Models (NPN output)
Load
Brown
Brown
Sensor
Load
Incorrect
Black
Make sure to connect a proper load to the
E2E/E2E2 in operation, otherwise it may
explode or burn.
DC 3-wire Models
Brown
Incorrect
Blue
Black
Blue
Connection with no load
Sensor
AC 2-wire Models
Load
Load
Brown
Sensor
Sensor
Blue
Blue
Incorrect
Incorrect
■ Precautions for Correct Use
Installation
Sensing Object
Power Reset Time
Metal Coating:
The sensing distances of the Proximity Sensor vary with the metal
coating on sensing objects.
The Proximity Sensor is ready to operate within 100 ms after power
is supplied. If power supplies are connected to the Proximity Sensor
and load respectively, be sure to supply power to the Proximity
Sensor before supplying power to the load.
Power OFF
The Proximity Sensor may output a pulse signal when it is turned
OFF. Therefore, it is recommended to turn OFF the load before
turning OFF the Proximity Sensor.
Power Supply Transformer
When using a DC power supply, make sure that the DC power
supply has an insulated transformer. Do not use a DC power supply
with an auto-transformer.
E2E/E2E2 Cylindrical Proximity Sensor
35
Wiring
Environment
High-tension Lines
Water Resistivity
Wiring through Metal Conduit
If there is a power or high-tension line near the cable of the Proximity
Sensor, wire the cable through an independent metal conduit to
prevent against Proximity Sensor damage or malfunctioning.
Cable Tractive Force
Do not pull on cables with tractive forces exceeding the following.
Diameter
Tractive force
4 dia. max.
30 N max.
4 dia. min.
50 N max.
Mounting
Do not use the Proximity Sensor underwater, outdoors, or in the rain.
Operating Environment
Be sure to use the Proximity Sensor within its operating ambient
temperature range and do not use the Proximity Sensor outdoors so
that its reliability and life expectancy can be maintained. Although
the Proximity Sensor is water resistive, a cover to protect the
Proximity Sensor from water or water soluble machining oil is
recommended so that its reliability and life expectancy can be
maintained.
Do not use the Proximity Sensor in an environment with chemical
gas (e.g., strong alkaline or acid gasses including nitric, chromic,
and concentrated sulfuric acid gases).
The Proximity Sensor must not be subjected to excessive shock with
a hammer when it is installed, otherwise the Proximity Sensor may
be damaged or lose its water-resistivity.
Connecting Load to AC/DC 2-wire Sensor
Refer to the following before using AC or DC 2-wire Proximity
Sensors.
Surge Protection
P: The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
I: Load current (mA)
Although the Proximity Sensor has a surge absorption circuit, if there
is any machine that has a large surge current (e.g., a motor or
welding machine) near the Proximity Sensor, connect a surge
absorber to the machine.
Leakage Current
When the Proximity Sensor is OFF, the Proximity Sensor has
leakage current. Refer to page 17 and page 20 Leakage Current
Characteristics. In this case, the load is imposed with a small voltage
and the load may not be reset. Before using the Proximity Sensor,
make sure that this voltage is less than the load reset voltage. The
AC 2-wire Proximity Sensor cannot be connected to any card-lift-off
relay (e.g., the G2A) because contact vibration of the relay will be
caused by the leakage current and the life of the relay will be
shortened.
The following resistors are recommended.
100 VAC (supply voltage): A resistor with a resistance of 10 kΩ
maximum and an allowable power of 3 W minimum
200 VAC (supply voltage): A resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum
If these resistors generate excessive heat, use a resistor with a
resistance of 10 kΩ maximum and an allowable power of 5 W
minimum at 100 VAC and a resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum at 200 VAC
instead.
DC 2-wire Models
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
Load
Loads with Large Inrush Currents
(E2E-X@T@)
Connecting a load that has a large inrush current (e.g., a lamp or
motor) may result in a malfunction due to the inrush current causing
a load short-circuit.
Countermeasures Against Leakage Current
AC 2-wire Models
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
As shown in the following diagram, connect the bleeder resistor so
that the current flowing into the Proximity Sensor will be 10 mA
minimum and the residual voltage imposed on the load will be less
than the load reset voltage.
Load
Bleeder resistor R
VAC power
supply VS
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(10 – I) (kΩ)
P > VS2/R (mW)
36
E2E/E2E2 Cylindrical Proximity Sensor
Bleeder resistor R
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(iR – iOFF) (k Ω)
P > VS2/R (mW)
P:
The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
iR:
Leakage current of Sensors (mA)
iOFF: Release current of load (mA)
The following resistors are recommended.
12 VDC (supply voltage): A resistor with a resistance of 15 kΩ
maximum and an allowable power of 450 mW minimum
24 VDC (supply voltage): A resistor with a resistance of 30 kΩ
maximum and an allowable power of 0.1 W minimum
Connection to a PLC
Example
Required Conditions
In this example, the above conditions are checked for when the PLC
model is the C200H-ID212, the Proximity Sensor model is the E2EX7D1-N, and the power supply voltage is 24 V.
Connection to a PLC is possible if the specifications of the PLC and
the Proximity Sensor satisfy the following conditions. (The meanings
of the symbols are given below.)
1. VON (14.4 V) ≤ VCC (20.4 V) – VR (3 V) = 17.4 V: OK
2. IOFF (1.3 mA) ≥ Ileak (0.8 mA): OK
1. The ON voltage of the PLC and the residual voltage of the Proximity Sensor must satisfy the following.
VON ≤ VCC – VR
3. ION = [VCC (20.4 V) – VR (3 V) – VPC (4 V)]/RIN (3 kΩ)
≈ 4.5 mA
Therefore,
IOUT(min) (3 mA) ≤ ION (4.5 mA): OK
2. The OFF current of the PLC and the leakage current of the Proximity Sensor must satisfy the following.
IOFF ≥ Ileak
(If the OFF current is not listed in the specifications, take it to be
1.3 mA.)
3. The ON current of the PLC and the control output (IOUT) of the
Proximity Sensor must satisfy the following.
IOUT(min) ≤ ION ≤ IOUT(max)
The ON current of the PLC will vary, however, with the power supply voltage and the input impedance used as shown in the following equation.
ION = (VCC – VR – VPC )/RIN
VON: ON voltage of PLC (14.4 V)
ION: ON current of PLC (typ. 7 mA)
IOFF: OFF current of PLC (1.3 mA)
RIN: Input impedance of PLC (3 kΩ)
VPC: Internal residual voltage of PLC (4 V)
VR: Output residual voltage of Proximity Sensor (3 V)
Ileak: Leakage current of Proximity Sensor (0.8 mA)
IOUT: Control output of Proximity Sensor (3 to 100 mA)
VCC: Power supply voltage (PLC: 20.4 to 26.4 V)
Values in parentheses are for the following PLC model and Proximity
Sensor model.
PLC: C200H-ID212
Proximity Sensor: E2E-X7D1-N
■ Precautions for AC/DC 2-wire Proximity Sensors in Operation
Connection
Model
DC 2-wire
Connection type
AND (serial connection)
Method
Description
The Sensors connected together must satisfy the
following conditions.
Correct
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
Load
If each Proximity Sensor is not supplied with the
rated voltage and current, the indicator will not be lit
properly or unnecessary pulses may be output for
approximately 1 ms.
OR
(parallel connection)
The Sensors connected together must satisfy the
following conditions.
Correct
Load
N x i ≤ Load reset current
N: No. of Sensors
i: Leakage current of each Sensor
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of four Proximity
Sensors can be connected to the load.
AC 2-wire
AND (serial connection)
If 100 or 200 VAC is imposed on the Proximity
Sensors, VL (i.e., the voltage imposed on the load)
will be obtained from the following.
Incorrect
Load
VL = VS – (residual voltage x No. of Proximity
Sensors) (V)
Therefore, if VL is lower than the load operating
voltage, the load will not operate.
Correct
A maximum of three Proximity Sensors can be
connected in series provided that the supply voltage
is 100 V minimum.
Load
Load
Vs × 100 V
E2E/E2E2 Cylindrical Proximity Sensor
37
Model
Connection type
AC 2-wire
OR
(parallel connection)
Method
Description
In principle, more than two Proximity Sensors cannot
be connected in parallel.
Incorrect
A
Load
Provided that Proximity Sensor A does not operate
with Proximity Sensor B simultaneously and there is
no need to keep the load operating continuously, the
Proximity Sensors can be connected in parallel. In
this case, however, due to the total leakage current
of the Proximity Sensors, the load may not reset
properly.
B
Correct
Load
A
B
VAC power
supply VS
It is not possible to keep the load operating
continuously with Proximity Sensors A and B in
simultaneous operation to sense sensing objects
due to the following reason.
When Proximity Sensor A is ON, the voltage
imposed on Proximity Sensor A will drop to
approximately 10 V and the load current flows into
Proximity Sensor A, and when one of the sensing
objects is close to Proximity Sensor B, Proximity
Sensor B will not operate because the voltage
imposed on Proximity Sensor B is 10 V, which is too
low. When Proximity Sensor A is OFF, the voltage
imposed on Proximity Sensor B will reach the supply
voltage and Proximity Sensor B will be ON. Then,
Proximity Sensor A as well as Proximity Sensor B
will be OFF for approximately 10 ms, which resets
the load for an instant. To prevent the instantaneous
resetting of the load, use a relay as shown on the left.
DC 3-wire
AND (serial connection)
Correct
Load
The Sensors connected together must satisfy the
following conditions.
iL + (N –1) x i ≤ Upper-limit of control output of each
Sensor
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
i: Current consumption of the Sensor
iL: Load current
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of two Proximity
Sensors can be connected to the load.
38
E2E/E2E2 Cylindrical Proximity Sensor
Dimensions
Note: All units are in millimeters unless otherwise indicated.
E2E
Model
DC 2-wire
DC 3-wire
Model No.
Pre-wired
Shielded
Unshielded
Connector Shielded
(M12)
Unshielded
Connector (M8-3
pin)
Shielded
Connector Shielded
(M8)
3 dia.
Shielded
Unshielded
Pre-wired
connector
(no polarity)
Shielded
---
AC 2-wire
Model No.
Figure
No.
E2E-CR6@
1
4 dia.
E2E-CR8@@
2
M5
E2E-X1@@
4
5.4 dia.
E2E-C1@@
3
Model No.
---
AC/DC 2-wire
Figure
No.
---
Model No.
Figure
No.
---
---
M8
E2E-X2D@-N
5
E2E-X1R5E@/F@
5
E2E-X1R5Y@
7
M12
E2E-X3D@-N
9
E2E-X2E@/F@
9
E2E-X2Y@
11
E2E-X3T1
12
M18
E2E-X7D@-N
14
E2E-X5E@/F@
14
E2E-X5Y@
12
E2E-X7T1
13
M30
E2E-X10D@-N
16
E2E-X10E@/F@
16
E2E-X10Y@
16
E2E-X10T1 15
M8
E2E-X4MD@
6
E2E-X2ME@/F@
6
E2E-X2MY@
8
---
---
M12
E2E-X8MD@
10
E2E-X5ME@/F@
10
E2E-X5MY@
12
M18
E2E-X14MD@
15
E2E-X10ME@/F@ 15
E2E-X10MY@
15
M30
E2E-X20MD@
17
E2E-X18ME@/F@ 17
E2E-X18MY@
17
M8
E2E-X2D@-M1(G)
18
E2E-X1R5E@-M1/ 18
F@-M1
---
---
---
---
M12
E2E-X3D@-M1(G)
20
E2E-X2E@-M1
/F@-M1
20
E2E-X2Y@-M1
22
M18
E2E-X7D@-M1(G)
24
E2E-X5E@-M1
/F@-M1
24
E2E-X5Y@-M1
24
M30
E2E-X10D@-M1(G)
26
E2E-X10E@-M1
/F@-M1
26
E2E-X10Y@-M1
26
M8
E2E-X4MD@-M1(G) 19
E2E-X2ME@-M1
/F@-M1
19
---
---
---
---
M12
E2E-X8MD@-M1(G) 21
E2E-X5ME@-M1
/F@-M1
21
E2E-X5MY@-M1
23
M18
E2E-X14MD@M1(G)
25
E2E-X10ME@-M1/ 25
F@-M1
E2E-X10MY@-M1 25
M30
E2E-X20MD@M1(G)
27
E2E-X18ME@-M1/ 27
F@-M1
E2E-X18MY@-M1 27
4 dia.
---
---
E2E-CR8@@-M5
36
---
---
---
M5
---
---
E2E-X1@@-M5
37
---
---
---
M8
E2E-X2D@-M3G
28
E2E-X1R5E@-M3/ 28
F@-M3
---
---
---
---
E2E-X4MD@-M3G
29
E2E-X2ME@-M3
/F@-M3
29
M12
E2E-X3D1-M1GJ
30
---
---
---
---
---
---
M18
E2E-X7D1-M1GJ
32
M30
E2E-X10D1-M1GJ
34
M12
E2E-X8MD1-M1GJ
31
---
---
---
---
---
---
M18
E2E-X14MD1-M1GJ 33
M30
E2E-X20MD1-M1GJ 35
M12
E2E-X3D1-M1J-T
30
---
---
---
---
---
---
M18
E2E-X7D1-M1J-T
32
M30
E2E-X10D1-M1J-T
34
Unshielded
Pre-wired
connector
---
Figure
No.
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of Pre-wired M8 to M30 Models are laser-marked on the milled section and cable section.
E2E/E2E2 Cylindrical Proximity Sensor
39
Pre-wired Models
(Shielded)
Fig. 3: E2E-C1@@
Fig. 1: E2E-CR6@@
27
3±0.1 dia.
25
17.5
5.4 dia.
17
Operation
indicator
(red)
Operation
indicator
(red)
2.4-dia. (7/0.127-dia.) vinyl-insulated round cable
with 3 conductors,
Standard length: 2 m
2.9-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.15 mm2,
Insulator diameter: 1.05 mm), Standard length: 2 m
The cable can be extended up to 100 m (separate metal conduit).
Fig. 2: E2E-CR8@@
25
17.5
4 dia.
Fig. 4: E2E-X1@@
25
17.5
9.7 dia.
Operation
indicator
(red)
15
8
2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia. vinyl-insulated
round cable with 3 conductors (Conductor cross
section: 0.15 mm2, Insulator diameter: 1.05 mm),
Standard length: 2 m
The cable can be extended up to 100 m (separate
metal conduit).
Operation
indicator (red)
Two clamping nuts
Toothed
washer
4
M5 × 0.5
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 5: E2E-X2D@-N
E2E-X1R5E@/F@
Fig. 6: E2E-X4MD@
E2E-X2ME@/F@
30
7
30
15 dia.
15 dia.
3
13
8
7
26
26
13
2.9-dia. vinyl-insulated round cable
with 3 conductors
(Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia.
vinyl-insulated round cable with
3 conductors (Conductor cross
section: 0.15 mm2, Insulator
diameter: 1.05 mm),
Standard length: 2 m
The cable can be extended up to
100 m (separate metal conduit).
6
8
3
6.1 dia.
Indicator
(See note.)
Two clamping
nuts
M8 × 1
Toothed
washer
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E, F Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable Models: 4-dia.
vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F Models: Operation indicator (red)
Fig. 7: E2E-X1R5Y@
3
Fig. 8: E2E-X2MY@
40
15 dia.
36
13
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors (E, F
Models)(Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
Note: D Models: Operation indicator (red),
Robotics cable models: 4-dia.
setting indicator (green);
vinyl-insulated round cable with
E, F Models: Operation indicator (red) 2 conductors (D Models)/3 conductors (E
Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
7
40
15 dia.
Indicator
(See note.)
Two
Toothed clamping nuts
washer
M8 × 1
13
8
7
36
6
8
3
6.1 dia.
M8 × 1
Two
clamping nuts
Toothed
washer
Fig. 9: E2E-X3D@-N
E2E-X2E@/F@
Pre-wired e-CON connector Model
38
9
33
21 dia.
4
10
M8 × 1
4-dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
1
2
17
Operation
indicator (red)
Two
clamping nuts
Toothed
washer
Operation Indicator (red)
15.6
3
4
5.9
Fig. 10: E2E-X8MD@
E2E-X5ME@/F@
4-dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Pre-wired e-CON connector Model
1
2
38
15
Connector:
Product code 37104-3163-000FL
(Sumitomo 3M)
9
33
21 dia.
17
7
4
10
15.6
3
4
5.9
15
Connector:
Product code 37104-3163-000FL
(Sumitomo 3M)
9 dia.
M12 × 1
Indicator
(See note.)
Two
clamping nuts
Toothed washer
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F Models:
Operation indicator (red)
40
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(D@S,E, F Models) (Conductor cross section:
0.3 mm2,Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable Models: 4-dia.
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended (separate metal conduit)
up to 200 m (control output) or up to 100 m
(diagnostic output).
E2E/E2E2 Cylindrical Proximity Sensor
M12 × 1
Indicator 4-dia. vinyl-insulated round cable with
(See note.) 2 conductors (D Models)/3 conductors
Two
(D@S, E, F Models) (Conductor cross section:
clamping nuts 0.3 mm2, Insulator diameter: 1.3 mm),
Toothed
Standard length: 2 m
washer
Robotics cable models: 4-dia.
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F Models:
Operation indicator (red)
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 11: E2E-X2Y@
Fig. 12: E2E-X5MY@
43
43
9
17
4
17
10
9
38
21 dia.
38
21 dia.
7
10
4
9 dia.
Two clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable
with 2 conductors (Conductors
cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to
200 m (separate metal conduit).
Two
clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable with
2 conductors (Conductors cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Fig. 13: E2E-X3T1
60
Operation indicator (red)
M12 × 1
Operation indicator (red)
M12 × 1
9
55
21 dia.
17
4
10
M12 × 1
Two
clamping nuts
Toothed washer
Indicator (See note.)
4-dia. vinyl-insulated round cable with 2 conductors
(Conductors cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m (separate metal conduit).
Note: Operation indicator (red), setting indicator
(green)
Fig. 14: E2E-X7D@-N/
E2E-X5E@/F@
E2E-X5Y@/E2E-X7T1
Pre-wired e-CON connector Model
1
2
43
15.6
43
24
Two
clamping nuts
Toothed washer
Note: D, T Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models: Operation indicator (red)
Fig. 16: E2E-X10D@-N/
E2E-X10E@/F@
E2E-X10Y@/
E2E-X10T1
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3 conductors
(D@S, E, F Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm)
Standard length: 2 m
Robotics cable models: 6-dia. vinyl-insulated
round cable with 2 conductors (D Models)/
3 conductors (E Models) (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
Pre-wired e-CON connector Model
1
2
48
12
43
42 dia.
5
36
10
3
4
5.9
15.6
10
Toothed washer
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models:
Operation indicator (red)
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3
conductors (D@S, E, F Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm)
Standard length: 2 m
Robotics cable Models: 6-dia. vinylinsulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate
metal conduit) up to 200 m (control
output) or up to 100 m (diagnostic
output).
Fig. 17: E2E-X20MD@/
E2E-X18ME@/F@
E2E-X18MY@
Pre-wired e-CON connector Model
1
2
15
15.6
Connector:
Product code
37104-2206-000FL
(Sumitomo 3M)
48
12
43
42 dia.
13
36
15
3
4
Connector:
Product code 37104-2206-000FL
(Sumitomo 3M)
Indicator
(See note.)
Two
clamping nuts
M18 × 1
5.9
1
2
12
4
10
14.8 dia.
Indicator
(See note.)
M18 × 1
Pre-wired e-CON connector Model
38
29 dia.
Connector:
Product code 37104-2206-000FL
(Sumitomo 3M)
10
4
24
Fig. 15: E2E-X14MD@/
E2E-X10ME@/F@
E2E-X10MY@
15
3
4
12
38
29 dia.
5.9
5
10
5.9
3
15
4
15.6
Connector:
Product code
37104-2206-000FL
(Sumitomo 3M)
26.8 dia.
6-dia. vinyl-insulated round cable
6-dia. vinyl-insulated round
M30 × 1.5
Indicator (See note.) cable with 2 conductors (D, Y, T
Two clamping nuts
Toothed washer
Note: D, T Models: Operation indicator (red),
setting indicator (green);
E,F,Y Models: Operation indicator (red)
Models)/3 conductors (D@S, E, F
Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
Robotics cable Models: 6-dia. vinylinsulated round cable with
2 conductors (D Models)/3
conductors (E Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm),
Standard length: 2 m
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
M30 × 1.5
Toothed washer
Indicator with 2 conductors (D, Y, T Models)/3
(See note.) conductors (D@S, E, F Models)
Two
(Conductor cross section: 0.5 mm2,
clamping nuts Insulator diameter: 1.9 mm),
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F, Y Models: Operation indicator (red)
Standard length: 2 m
Robotics cable Models: 6-dia. vinylinsulated round cable with
2 conductors (D Models)/
3 conductors (E Models) (Conductor
cross section: 0.5 mm2,
Insulator diameter: 1.74 mm),
Standard length: 2 m
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
E2E/E2E2 Cylindrical Proximity Sensor
41
M12 Connector Models
(Shielded)
M12 Connector Models
(Unshielded)
Fig. 18: E2E-X2D@-M1(G)
E2E-X1R5E@-M1/F@-M1
Fig. 19: E2E-X4MD@-M1(G)
E2E-X2ME@-M1/F@-M1
43
43
30
15 dia.
26
M12 × 1
8
3
13
30
15 dia.
26
M12 × 1
8
3
6
13
6.1 dia.
Indicator (See note.)
Two clamping nuts
Toothed washer
M8 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
M8 × 1
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Fig. 20: E2E-X3D@-M1(G)
E2E-X2E@-M1/F@-M1
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Fig. 21: E2E-X8MD@-M1(G)
E2E-X5ME@-M1/F@-M1
48
48
4
17
33
21 dia.
33
21 dia.
10
7
17
M12 × 1
M12 × 1
10
4
9 dia.
Indicator (See note.)
Two clamping nuts
Toothed washer
M12 × 1
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Fig. 22: E2E-X2Y@-M1
Indicator (See note.)
Two clamping nuts
Toothed washer
M12 × 1
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Fig. 23: E2E-X5MY@-M1
53
53
38
21 dia.
4
17
38
21 dia.
10
7
17
M12 × 1
M12 × 1
10
4
9 dia.
M12 × 1
Operating indicator (red)
Two clamping nuts
Toothed washer
Fig. 24: E2E-X7D@-M1(G)/E2E-X5E@-M1/F@-M1
E2E-X5Y@-M1
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 × 1
Fig. 25: E2E-X14MD@-M1(G)/E2E-X10ME@-M1/F@-M1
E2E-X10MY@-M1
53
53
38
29 dia.
4
24
38
29 dia.
10
10
24
10
4
M12 × 1
M12 × 1
14.8 dia.
Indicator (See note.)
M18 × 1
Indicator (See note.)
M18 × 1
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
Fig. 26: E2E-X10D@-M1(G)/E2E-X10E@-M1/F@-M1
E2E-X10Y@-M1
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
Fig. 27: E2E-X20MD@-M1(G)/E2E-X18ME@-M1/F@-M1
E2E-X18MY@-M1
58
58
5
36
36
10
M12 × 1
Indicator (See note.)
M30 × 1.5
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
42
43
42 dia.
43
42 dia.
E2E/E2E2 Cylindrical Proximity Sensor
13
26.8 dia.
M30 × 1.5
5
10
M12 × 1
Indicator (See note).
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
M8 (3 pin) Connector Models
(Shielded)
Fig. 36: E2E-CR8@@-M5
Fig. 37: E2E-X1@@-M5
35
10 dia.
35
25
4 dia.
25
20
19.0
8
M8, 3-pin connector
20
M8 × 1
M8, 3-pin connector
M8 × 1
Two clamping
nuts
Two toothed washers
Operating indicator
Operating indicator
M5 × 0.5
M8 Connector Models
(Shielded)
M8 Connector Models
(Unshielded)
Fig. 28: E2E-X2D@-M3G/E2E-X1R5E@-M3/F@-M3
Fig. 29: E2E-X4MD@-M3G/E2E-X2ME@-M3/F@-M3
39
31
39
31
15 dia.
15 dia.
26
8
3
13
26
6
13
M8 × 1
3
M8 × 1
8
6.1 dia.
M8 × 1
Note:
M8 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note:
Indicator (See note.)
Two clamping nuts
Toothed washer
D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Pre-wired M12 Connector Models
Fig. 30: E2E-X3D1-M1GJ
E2E-X3D1-M1J-T
38
9
33
21 dia.
10
4
17
M12 × 1
Operation Indicator (red),
setting indicator (green)
M12 × 1
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Two clamping nuts
Toothed washer
Fig. 31: E2E-X8MD1-M1GJ
38
9
33
21 dia.
10
4
7
17
M12 × 1
9 dia.
Operation indicator (red),
setting indicator (green)
Two clamping nuts
Toothed washer
M12 × 1
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Fig. 32: E2E-X7D1-M1GJ
E2E-X7D1-M1J-T
43
12
38
29 dia.
4
24
10
M12 × 1
M18 × 1
Operation indicator (red),
setting indicator (green)
Two clamping nuts
Toothed washer
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
E2E/E2E2 Cylindrical Proximity Sensor
43
Pre-wired M12 Connector Models
Fig. 33: E2E-X14MD1-M1GJ
43
12
38
29 dia.
10
4
10
24
M12 × 1
14.8 dia.
Operation indicator (red),
setting indicator (green)
Two clamping nuts
Toothed washer
M18 × 1
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Fig. 34: E2E-X10D1-M1GJ
E2E-X10D1-M1J-T
48
12
43
42 dia.
36
10
5
M12 × 1
Operation indicator (red),
setting indicator (green)
Two clamping nuts
M30 × 1.5
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Toothed washer
Fig. 35: E2E-X20MD1-M1GJ
48
12
43
42 dia.
13
36
5
10
M12 × 1
26.8 dia.
M30 × 1.5
Operation indicator (red),
setting indicator (green)
Two clamping nuts
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Toothed washer
Mounting Holes
F
Dimensions
F (mm)
44
3 dia.
3.3
+0.3
/0 dia.
4 dia.
4.2
+0.5
/0 dia.
M5
5.5
+0.5
/0 dia.
5.4 dia.
5.7
E2E/E2E2 Cylindrical Proximity Sensor
+0.5
/0 dia.
M8
+0.5
8.5
/0 dia.
M12
12.5
+0.5
/0 dia.
M18
18.5
+0.5
/0 dia.
M30
30.5
+0.5
/0 dia.
E2E2
Pre-wired Models
E2E2-X3D@
E2E2-X2@@
E2E2-X8MD@
E2E2-X5M@@
60
21 dia.
17
60
9
21 dia.
17
55
4
10
9
55
7
10
4
9 dia.
M12 × 1
Two
clamping nuts
Toothed washer
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Indicator (See note.)
M12 × 1
4-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Indicator (See note.)
Two clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable with 2
conductors (D, Y Models)/3 conductors
Note: D Models: Operation indicator (red),
(B, C Models) (Conductor cross section:
setting indicator (green)
2
B, C, Y Model: Operation indicator (red) 0.3 mm , Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
E2E2-X14MD@
E2E2-X7D@
E2E2-X5@@
E2E2-X10M@@
65
29 dia.
24
65
12
29 dia.
24
60
4
10
12
60
10
4
10
14.8 dia.
Indicator (See note.)
Two clamping nuts
6-dia. vinyl-insulated round cable with
Toothed washer
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
Note: D Models: Operation indicator (red),
0.5 mm2, Insulator diameter: 1.9 mm),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
M18 × 1
E2E2-X10D@@
E2E2-X10@@
70
65
42 dia.
36
Indicator (See note.)
Two clamping nuts
M18 × 1
Toothed washer
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
Note: D Models: Operation indicator (red),
(B, C Models) (Conductor cross section:
setting indicator (green)
0.5 mm2, Insulator diameter: 1.9 mm),
B, C, Y Model: Operation indicator (red)
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
12
5
10
Indicator (See note.)
M30 × 1.5
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
E2E2-X20MD@
E2E2-X18M@@
70
42 dia.
36
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
12
65
13
5
10
26.8 dia.
M30 × 1.5
Two clamping nuts
Toothed washer
Indicator
(See note.)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
E2E/E2E2 Cylindrical Proximity Sensor
45
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X2C@-M1/B@-M1
E2E2-X5MC@-M1/B@-M1
70
70
21.dia
17
10
4
55
21 dia.
17
55
4
M12 x 1
7
M12 x 1
10
9 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
E2E2-X2Y@-M4
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
E2E2-X5MY@-M4
70
70
21.dia
17
10
4
55
21 dia.
17
55
4
1/2-20unf
7
1/2-20unf
10
9 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
E2E2-X5C@-M1/B@-M1
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
E2E2-X10MC@-M1/B@-M1
75
75
60
29 dia.
29 dia
4
24
60
10
24
10
4
10
M12 x 1
M12 x 1
14.8 dia.
Operation indicator (red)
M18 x 1
Operation indicator (red)
M18 x 1
Two clamping nuts
Two clamping nuts
Toothed washer
Toothed washer
E2E2-X5Y@-M4
E2E2-X10MY@-M4
75
75
29 dia
60
29 dia.
4
24
60
10
24
10
4
10
1/2-20unf
1/2-20unf
14.8 dia.
Operation indicator (red)
M18 x 1
Two clamping nuts
Toothed washer
46
E2E/E2E2 Cylindrical Proximity Sensor
Operation indicator (red)
M18 x 1
Two clamping nuts
Toothed washer
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X10C@-M1/B@-M1
E2E2-X18MC@-M1/B@-M1
80
42 dia.
80
42 dia.
65
36
10
5
13
36
65
5
10
M12 x 1
M12 x 1
26.8 dia.
Operation indicator (red)
Operation indicator (red)
M30 x 1.5
M30 x 1.5
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
E2E2-X10Y@-M4
E2E2-X18MY@-M4
80
42 dia.
80
65
36
5
42 dia.
10
13
36
1/2-20unf
65
5
10
1/2-20unf
26.8 dia.
Operation indicator (red)
Operation indicator (red)
M30 x 1.5
M30 x 1.5
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
Mounting Holes
F
Dimensions
F (mm)
M12
12.5 + 0.5
dia.
0
M18
18.5 + 0.5
dia.
0
M30
30.5 + 00.5 dia.
E2E/E2E2 Cylindrical Proximity Sensor
47
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
Authorized Distributor:
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON Industrial Automation Global: www.ia.omron.com
© OMRON Corporation 2008 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
CSM_E2E_E2E2_DS_E_1_1
0508
Cat. No. D058-E1
Similar pages