EPCOS B32520C6222J289 Film capacitors - metallized polyester (mkt) Datasheet

Film Capacitors Metallized Polyester
(MKT)
Series/Type: B32520 ... B32529
The following products presented in this data sheet are being withdrawn.
Please see the next 4 pages.
Ordering Code
Substitute Product
Date of Withdrawal
Deadline Last Orders
Last Shipments
B32529D0475M289
B32529D5475M289
04.04.2014
15.07.2014
15.10.2014
B32529D0475M189
B32529D5475M189
04.04.2014
15.07.2014
15.10.2014
B32529D0475M000
B32529D5475M000
04.04.2014
15.07.2014
15.10.2014
B32529D0335M289
B32529D5335M289
04.04.2014
15.07.2014
15.10.2014
B32529D0335M189
B32529D5335M189
04.04.2014
15.07.2014
15.10.2014
B32529D0335M000
B32529D5335M000
04.04.2014
15.07.2014
15.10.2014
B32529D0335K289
B32529D5335K289
04.04.2014
15.07.2014
15.10.2014
B32529D0335K189
B32529D5335K189
04.04.2014
15.07.2014
15.10.2014
B32529D0335K000
B32529D5335K000
04.04.2014
15.07.2014
15.10.2014
B32529D0335J289
B32529D5335J289
04.04.2014
15.07.2014
15.10.2014
B32529D0335J189
B32529D5335J189
04.04.2014
15.07.2014
15.10.2014
B32529D0335J000
B32529D5335J000
04.04.2014
15.07.2014
15.10.2014
B32520C6682M289
B32529C6682M289
30.05.2014
31.08.2014
30.11.2014
B32520C6682M189
B32529C6682M189
30.05.2014
31.08.2014
30.11.2014
B32520C6682M000
B32529C6682M000
30.05.2014
31.08.2014
30.11.2014
B32520C6682K289
B32529C6682K289
30.05.2014
31.08.2014
30.11.2014
B32520C6682K189
B32529C6682K189
30.05.2014
31.08.2014
30.11.2014
B32520C6682K000
B32529C6682K000
30.05.2014
31.08.2014
30.11.2014
B32520C6682J289
B32529C6682J289
30.05.2014
31.08.2014
30.11.2014
B32520C6682J189
B32529C6682J189
30.05.2014
31.08.2014
30.11.2014
B32520C6682J000
B32529C6682J000
30.05.2014
31.08.2014
30.11.2014
B32520C6472M289
B32529C6472M289
30.05.2014
31.08.2014
30.11.2014
B32520C6472M189
B32529C6472M189
30.05.2014
31.08.2014
30.11.2014
B32520C6472M000
B32529C6472M000
30.05.2014
31.08.2014
30.11.2014
B32520C6472K289
B32529C6472K289
30.05.2014
31.08.2014
30.11.2014
B32520C6472K189
B32529C6472K189
30.05.2014
31.08.2014
30.11.2014
B32520C6472K000
B32529C6472K000
30.05.2014
31.08.2014
30.11.2014
B32520C6472J289
B32529C6472J289
30.05.2014
31.08.2014
30.11.2014
B32520C6472J189
B32529C6472J189
30.05.2014
31.08.2014
30.11.2014
B32520C6472J000
B32529C6472J000
30.05.2014
31.08.2014
30.11.2014
B32520C6332M289
B32529C6332M289
30.05.2014
31.08.2014
30.11.2014
B32520C6332M189
B32529C6332M189
30.05.2014
31.08.2014
30.11.2014
B32520C6332M000
B32529C6332M000
30.05.2014
31.08.2014
30.11.2014
B32520C6332K289
B32529C6332K289
30.05.2014
31.08.2014
30.11.2014
B32520C6332K189
B32529C6332K189
30.05.2014
31.08.2014
30.11.2014
B32520C6332K000
B32529C6332K000
30.05.2014
31.08.2014
30.11.2014
B32520C6332J289
B32529C6332J289
30.05.2014
31.08.2014
30.11.2014
B32520C6332J189
B32529C6332J189
30.05.2014
31.08.2014
30.11.2014
B32520C6332J000
B32529C6332J000
30.05.2014
31.08.2014
30.11.2014
B32520C6222M289
B32529C6222M289
30.05.2014
31.08.2014
30.11.2014
B32520C6222M189
B32529C6222M189
30.05.2014
31.08.2014
30.11.2014
B32520C6222M000
B32529C6222M000
30.05.2014
31.08.2014
30.11.2014
B32520C6222K289
B32529C6222K289
30.05.2014
31.08.2014
30.11.2014
B32520C6222K189
B32529C6222K189
30.05.2014
31.08.2014
30.11.2014
B32520C6222K000
B32529C6222K000
30.05.2014
31.08.2014
30.11.2014
B32520C6222J289
B32529C6222J289
30.05.2014
31.08.2014
30.11.2014
B32520C6222J189
B32529C6222J189
30.05.2014
31.08.2014
30.11.2014
Ordering Code
Substitute Product
Date of Withdrawal
Deadline Last Orders
Last Shipments
B32520C6222J000
B32529C6222J000
30.05.2014
31.08.2014
30.11.2014
B32520C6152M289
B32529C6152M289
30.05.2014
31.08.2014
30.11.2014
B32520C6152M189
B32529C6152M189
30.05.2014
31.08.2014
30.11.2014
B32520C6152M000
B32529C6152M000
30.05.2014
31.08.2014
30.11.2014
B32520C6152K289
B32529C6152K289
30.05.2014
31.08.2014
30.11.2014
B32520C6152K189
B32529C6152K189
30.05.2014
31.08.2014
30.11.2014
B32520C6152K000
B32529C6152K000
30.05.2014
31.08.2014
30.11.2014
B32520C6152J289
B32529C6152J289
30.05.2014
31.08.2014
30.11.2014
B32520C6152J189
B32529C6152J189
30.05.2014
31.08.2014
30.11.2014
B32520C6152J000
B32529C6152J000
30.05.2014
31.08.2014
30.11.2014
B32520C6103M289
B32529C6103M289
30.05.2014
31.08.2014
30.11.2014
B32520C6103M189
B32529C6103M189
30.05.2014
31.08.2014
30.11.2014
B32520C6103M000
B32529C6103M000
30.05.2014
31.08.2014
30.11.2014
B32520C6103K289
B32529C6103K289
30.05.2014
31.08.2014
30.11.2014
B32520C6103K189
B32529C6103K189
30.05.2014
31.08.2014
30.11.2014
B32520C6103K000
B32529C6103K000
30.05.2014
31.08.2014
30.11.2014
B32520C6103J289
B32529C6103J289
30.05.2014
31.08.2014
30.11.2014
B32520C6103J189
B32529C6103J189
30.05.2014
31.08.2014
30.11.2014
B32520C6103J000
B32529C6103J000
30.05.2014
31.08.2014
30.11.2014
B32520C6102M289
B32529C6102M289
30.05.2014
31.08.2014
30.11.2014
B32520C6102M189
B32529C6102M189
30.05.2014
31.08.2014
30.11.2014
B32520C6102M000
B32529C6102M000
30.05.2014
31.08.2014
30.11.2014
B32520C6102K289
B32529C6102K289
30.05.2014
31.08.2014
30.11.2014
B32520C6102K189
B32529C6102K189
30.05.2014
31.08.2014
30.11.2014
B32520C6102K000
B32529C6102K000
30.05.2014
31.08.2014
30.11.2014
B32520C6102J289
B32529C6102J289
30.05.2014
31.08.2014
30.11.2014
B32520C6102J189
B32529C6102J189
30.05.2014
31.08.2014
30.11.2014
B32520C6102J000
B32529C6102J000
30.05.2014
31.08.2014
30.11.2014
B32520C3473M289
B32529C3473M289
30.05.2014
31.08.2014
30.11.2014
B32520C3473M189
B32529C3473M189
30.05.2014
31.08.2014
30.11.2014
B32520C3473M000
B32529C3473M000
30.05.2014
31.08.2014
30.11.2014
B32520C3473K289
B32529C3473K289
30.05.2014
31.08.2014
30.11.2014
B32520C3473K189
B32529C3473K189
30.05.2014
31.08.2014
30.11.2014
B32520C3473K000
B32529C3473K000
30.05.2014
31.08.2014
30.11.2014
B32520C3473J289
B32529C3473J289
30.05.2014
31.08.2014
30.11.2014
B32520C3473J189
B32529C3473J189
30.05.2014
31.08.2014
30.11.2014
B32520C3473J000
B32529C3473J000
30.05.2014
31.08.2014
30.11.2014
B32520C3333M289
B32529C3333M289
30.05.2014
31.08.2014
30.11.2014
B32520C3333M189
B32529C3333M189
30.05.2014
31.08.2014
30.11.2014
B32520C3333M000
B32529C3333M000
30.05.2014
31.08.2014
30.11.2014
B32520C3333K289
B32529C3333K289
30.05.2014
31.08.2014
30.11.2014
B32520C3333K189
B32529C3333K189
30.05.2014
31.08.2014
30.11.2014
B32520C3333K000
B32529C3333K000
30.05.2014
31.08.2014
30.11.2014
B32520C3333J289
B32529C3333J289
30.05.2014
31.08.2014
30.11.2014
B32520C3333J189
B32529C3333J189
30.05.2014
31.08.2014
30.11.2014
B32520C3333J000
B32529C3333J000
30.05.2014
31.08.2014
30.11.2014
B32520C3223M289
B32529C3223M289
30.05.2014
31.08.2014
30.11.2014
Ordering Code
Substitute Product
Date of Withdrawal
Deadline Last Orders
Last Shipments
B32520C3223M189
B32529C3223M189
30.05.2014
31.08.2014
30.11.2014
B32520C3223M000
B32529C3223M000
30.05.2014
31.08.2014
30.11.2014
B32520C3223K289
B32529C3223K289
30.05.2014
31.08.2014
30.11.2014
B32520C3223K189
B32529C3223K189
30.05.2014
31.08.2014
30.11.2014
B32520C3223K000
B32529C3223K000
30.05.2014
31.08.2014
30.11.2014
B32520C3223J289
B32529C3223J289
30.05.2014
31.08.2014
30.11.2014
B32520C3223J189
B32529C3223J189
30.05.2014
31.08.2014
30.11.2014
B32520C3223J000
B32529C3223J000
30.05.2014
31.08.2014
30.11.2014
B32520C3153M289
B32529C3153M289
30.05.2014
31.08.2014
30.11.2014
B32520C3153M189
B32529C3153M189
30.05.2014
31.08.2014
30.11.2014
B32520C3153M000
B32529C3153M000
30.05.2014
31.08.2014
30.11.2014
B32520C3153K289
B32529C3153K289
30.05.2014
31.08.2014
30.11.2014
B32520C3153K189
B32529C3153K189
30.05.2014
31.08.2014
30.11.2014
B32520C3153K000
B32529C3153K000
30.05.2014
31.08.2014
30.11.2014
B32520C3153J289
B32529C3153J289
30.05.2014
31.08.2014
30.11.2014
B32520C3153J189
B32529C3153J189
30.05.2014
31.08.2014
30.11.2014
B32520C3153J000
B32529C3153J000
30.05.2014
31.08.2014
30.11.2014
B32520C1683M289
B32529C1683M289
30.05.2014
31.08.2014
30.11.2014
B32520C1683M189
B32529C1683M189
30.05.2014
31.08.2014
30.11.2014
B32520C1683M000
B32529C1683M000
30.05.2014
31.08.2014
30.11.2014
B32520C1683K289
B32529C1683K289
30.05.2014
31.08.2014
30.11.2014
B32520C1683K189
B32529C1683K189
30.05.2014
31.08.2014
30.11.2014
B32520C1683K000
B32529C1683K000
30.05.2014
31.08.2014
30.11.2014
B32520C1683J289
B32529C1683J289
30.05.2014
31.08.2014
30.11.2014
B32520C1683J189
B32529C1683J189
30.05.2014
31.08.2014
30.11.2014
B32520C1683J000
B32529C1683J000
30.05.2014
31.08.2014
30.11.2014
B32520C1473M289
B32529C1473M289
30.05.2014
31.08.2014
30.11.2014
B32520C1473M189
B32529C1473M189
30.05.2014
31.08.2014
30.11.2014
B32520C1473M000
B32529C1473M000
30.05.2014
31.08.2014
30.11.2014
B32520C1473K289
B32529C1473K289
30.05.2014
31.08.2014
30.11.2014
B32520C1473K189
B32529C1473K189
30.05.2014
31.08.2014
30.11.2014
B32520C1473K000
B32529C1473K000
30.05.2014
31.08.2014
30.11.2014
B32520C1473J289
B32529C1473J289
30.05.2014
31.08.2014
30.11.2014
B32520C1473J189
B32529C1473J189
30.05.2014
31.08.2014
30.11.2014
B32520C1473J000
B32529C1473J000
30.05.2014
31.08.2014
30.11.2014
B32520C1104M289
B32529C1104M289
30.05.2014
31.08.2014
30.11.2014
B32520C1104M189
B32529C1104M189
30.05.2014
31.08.2014
30.11.2014
B32520C1104M000
B32529C1104M000
30.05.2014
31.08.2014
30.11.2014
B32520C1104K289
B32529C1104K289
30.05.2014
31.08.2014
30.11.2014
B32520C1104K189
B32529C1104K189
30.05.2014
31.08.2014
30.11.2014
B32520C1104K000
B32529C1104K000
30.05.2014
31.08.2014
30.11.2014
B32520C1104J289
B32529C1104J289
30.05.2014
31.08.2014
30.11.2014
B32520C1104J189
B32529C1104J189
30.05.2014
31.08.2014
30.11.2014
B32520C1104J000
B32529C1104J000
30.05.2014
31.08.2014
30.11.2014
B32520C0683M289
B32529C0683M289
30.05.2014
31.08.2014
30.11.2014
B32520C0683M189
B32529C0683M189
30.05.2014
31.08.2014
30.11.2014
B32520C0683M000
B32529C0683M000
30.05.2014
31.08.2014
30.11.2014
Ordering Code
Substitute Product
Date of Withdrawal
Deadline Last Orders
Last Shipments
B32520C0683K289
B32529C0683K289
30.05.2014
31.08.2014
30.11.2014
B32520C0683K189
B32529C0683K189
30.05.2014
31.08.2014
30.11.2014
B32520C0683K000
B32529C0683K000
30.05.2014
31.08.2014
30.11.2014
B32520C0683J289
B32529C0683J289
30.05.2014
31.08.2014
30.11.2014
B32520C0683J189
B32529C0683J189
30.05.2014
31.08.2014
30.11.2014
B32520C0683J000
B32529C0683J000
30.05.2014
31.08.2014
30.11.2014
B32520C0334M289
B32529C0334M289
30.05.2014
31.08.2014
30.11.2014
B32520C0334M189
B32529C0334M189
30.05.2014
31.08.2014
30.11.2014
B32520C0334M000
B32529C0334M000
30.05.2014
31.08.2014
30.11.2014
B32520C0334K289
B32529C0334K289
30.05.2014
31.08.2014
30.11.2014
B32520C0334K189
B32529C0334K189
30.05.2014
31.08.2014
30.11.2014
B32520C0334K000
B32529C0334K000
30.05.2014
31.08.2014
30.11.2014
B32520C0334J289
B32529C0334J289
30.05.2014
31.08.2014
30.11.2014
B32520C0334J189
B32529C0334J189
30.05.2014
31.08.2014
30.11.2014
B32520C0334J000
B32529C0334J000
30.05.2014
31.08.2014
30.11.2014
B32520C0224M289
B32529C0224M289
30.05.2014
31.08.2014
30.11.2014
B32520C0224M189
B32529C0224M189
30.05.2014
31.08.2014
30.11.2014
B32520C0224M000
B32529C0224M000
30.05.2014
31.08.2014
30.11.2014
B32520C0224K289
B32529C0224K289
30.05.2014
31.08.2014
30.11.2014
B32520C0224K189
B32529C0224K189
30.05.2014
31.08.2014
30.11.2014
B32520C0224K000
B32529C0224K000
30.05.2014
31.08.2014
30.11.2014
B32520C0224J289
B32529C0224J289
30.05.2014
31.08.2014
30.11.2014
B32520C0224J189
B32529C0224J189
30.05.2014
31.08.2014
30.11.2014
B32520C0224J000
B32529C0224J000
30.05.2014
31.08.2014
30.11.2014
B32520C0154M289
B32529C0154M289
30.05.2014
31.08.2014
30.11.2014
B32520C0154M189
B32529C0154M189
30.05.2014
31.08.2014
30.11.2014
B32520C0154M000
B32529C0154M000
30.05.2014
31.08.2014
30.11.2014
B32520C0154K289
B32529C0154K289
30.05.2014
31.08.2014
30.11.2014
B32520C0154K189
B32529C0154K189
30.05.2014
31.08.2014
30.11.2014
B32520C0154K000
B32529C0154K000
30.05.2014
31.08.2014
30.11.2014
B32520C0154J289
B32529C0154J289
30.05.2014
31.08.2014
30.11.2014
B32520C0154J189
B32529C0154J189
30.05.2014
31.08.2014
30.11.2014
B32520C0154J000
B32529C0154J000
30.05.2014
31.08.2014
30.11.2014
B32520C0104M289
B32529C0104M289
30.05.2014
31.08.2014
30.11.2014
B32520C0104M189
B32529C0104M189
30.05.2014
31.08.2014
30.11.2014
B32520C0104M000
B32529C0104M000
30.05.2014
31.08.2014
30.11.2014
B32520C0104K289
B32529C0104K289
30.05.2014
31.08.2014
30.11.2014
B32520C0104K189
B32529C0104K189
30.05.2014
31.08.2014
30.11.2014
B32520C0104K000
B32529C0104K000
30.05.2014
31.08.2014
30.11.2014
B32520C0104J289
B32529C0104J289
30.05.2014
31.08.2014
30.11.2014
B32520C0104J189
B32529C0104J189
30.05.2014
31.08.2014
30.11.2014
B32520C0104J000
B32529C0104J000
30.05.2014
31.08.2014
30.11.2014
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
Metallized polyester film capacitors (MKT)
B32520 ... B32529
General purpose (stacked/wound)
Typical applications
Blocking
Coupling, decoupling
Bypassing
RFI for automotive
Dimensional drawing
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1): 55/125/56
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Stacked-film technology for lead spacing
5 to 15 mm
= code C, D or E in digit 7 of ordering code
Wound capacitor technology for lead
spacing 10 to 37.5 mm
= code N, Q or R in digit 7 of ordering code
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
High pulse strength
High contact reliability
RoHS-compatible
Halogen-free capacitors available on request
Dimensions in mm
Lead spacing
±0.4
5.0
7.5
10.0
15.0
22.5
27.5
37.5
1) 0.5 mm for capacitor width w = 4 mm
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer's logo,
rated capacitance (coded), cap. tolerance (code letter),
rated DC voltage, date of manufacture (coded),
coded type ("1") for lead spacing 5 mm,
series and lot number for lead spacing ≥10 mm
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter "Taping and packing".
Please read Important notes
at the end of this document.
Lead diameter
d1 ±0.05
0.5
0.5
0.61)
0.8
0.8
0.8
1.0
Page 2 of 45
Type
B32529
B32520
B32521
B32522
B32523
B32524
B32526
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 5.0 mm
7.5 mm
10.0 mm
Type
B32529
B32520
B32521
Page
6
10
Technology
s
s
s
VR (V DC)
50
63
100 250 400 630 63
100 250 400 63
100 250 400 630
VRMS (V AC)
32
40
63
63
63
s
s
s
s
160 200 400 40
12
s
s
s
s
160 200 40
CR (µF)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Important notes
at the end of this document.
Page 3 of 45
s
s
s
s
160 200 200
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 15.0 mm
22.5 mm
27.5 mm
Type
B32522
B32523
B32524
Page
14
17
Technology
s
s/w s/w s
VR (V DC)
63
100 250 400 450 630 63
100 250 400 630 63
100 250 400 630
VRMS (V AC)
40
63
63
63
w
s
w
160 200 200 200 40
18
w
w
w
w
w
160 200 200 40
CR (µF)
0.047
0.068
0.10
0.15
0.22
0.33
0.39
0.47
0.56
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Important notes
at the end of this document.
Page 4 of 45
w
w
w
w
160 200 220
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 37.5 mm
Type
B32526
Page
20
Technology
w
w
w
w
VR (V DC)
63
100
250
400
VRMS (V AC)
40
63
160
200
CR (µF)
3.3
4.7
5.6
6.8
8.2
10
15
22
33
47
56
68
82
100
150
220
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Important notes
at the end of this document.
Page 5 of 45
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
V DC
50
63
VRMS
CR
f ≤60 Hz
µF
V AC
32
3.3
4.7
40
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
Max. dimensions
w×h×l
mm
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
3.0 × 6.5 × 7.3
3.5 × 8.0 × 7.3
4.5 × 9.5 × 7.3
4.5 × 9.5 × 7.3
6.0 × 10.5 × 7.5
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
Ordering code
(composition see
below)
B32529D5335+***
B32529D5475M***
B32529C0102+***
B32529C0152+***
B32529C0222+***
B32529C0332+***
B32529C0472+***
B32529C0682+***
B32529C0103+***
B32529C0153+***
B32529C0223+***
B32529C0333+***
B32529C0473+***
B32529C0683+***
B32529C0104+***
B32529C0154+***
B32529C0224+***
B32529C0334+***
B32529C0474+***
B32529C0684+***
B32529C0105+***
B32529C0155+***
B32529D0225+***
B32529D0335+***
B32529D0475M***
Ammo
pack
pcs./MOQ
4000
4000
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
10800
9200
7200
7200
5200
4000
4000
4000
Reel
pcs./
MOQ
3200
3200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
9600
8000
6000
6000
4400
3200
3200
3200
Untaped
pcs./
MOQ
4000
4000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 6 of 45
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
V DC
100
VRMS
CR
f ≤60 Hz
µF
V AC
63
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
Max. dimensions
w×h×l
mm
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
3.0 × 6.5 × 7.3
3.5 × 8.0 × 7.3
3.5 × 8.0 × 7.3
4.5 × 9.5 × 7.3
6.0 × 10.5 × 7.5
7.8 × 13.0 × 7.8
Ordering code
(composition see
below)
B32529C1102+***
B32529C1152+***
B32529C1222+***
B32529C1332+***
B32529C1472+***
B32529C1682+***
B32529C1103+***
B32529C1153+***
B32529C1223+***
B32529C1333+***
B32529C1473+***
B32529C1683+***
B32529C1104+***
B32529C1154+***
B32529C1224+***
B32529C1334+***
B32529C1474+***
B32529C1684+***
B32529D1105+***
Ammo
pack
pcs./MOQ
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
12800
10800
9200
9200
7200
5200
4000
Reel
pcs./
MOQ
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
9600
8000
8000
6000
4400
3200
Untaped
pcs./
MOQ
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 7 of 45
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
V DC
250
VRMS
CR
f ≤60 Hz
µF
V AC
160
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
Max. dimensions
w×h×l
mm
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
3.0 × 6.5 × 7.3
3.5 × 8.0 × 7.3
4.5 × 9.5 × 7.3
4.5 × 9.5 × 7.3
5.0 × 10.0 × 7.5
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
Ordering code
(composition see
below)
B32529C3102+***
B32529C3152+***
B32529C3222+***
B32529C3332+***
B32529C3472+***
B32529C3682+***
B32529C3103+***
B32529C3153+***
B32529C3223+***
B32529C3333+***
B32529C3473+***
B32529C3683+***
B32529C3104+***
B32529C3154+***
B32529D3224+***
B32529C3334+***
B32529C3474+***
Ammo
pack
pcs./MOQ
12800
12800
12800
12800
12800
12800
12800
12800
12800
10800
9200
7200
7200
6400
4000
4000
4000
Reel
pcs./
MOQ
11200
11200
11200
11200
11200
11200
11200
11200
11200
9600
8000
6000
6000
5600
3200
3200
3200
Untaped
pcs./
MOQ
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
6000
4000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 8 of 45
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
V DC
400
630
VRMS
CR
f ≤60 Hz
µF
V AC
200
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
400
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
Max. dimensions
w×h×l
mm
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
3.0 × 6.5 × 7.3
3.0 × 6.5 × 7.3
3.5 × 8.0 × 7.3
4.5 × 9.5 × 7.3
4.5 × 9.5 × 7.3
6.0 × 10.5 × 7.5
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
2.5 × 6.5 × 7.3
3.5 × 8.0 × 7.3
3.5 × 8.0 × 7.3
3.5 × 8.0 × 7.3
5.0 × 10.0 × 7.5
5.0 × 10.0 × 7.5
7.8 × 13.0 × 7.8
7.8 × 13.0 × 7.8
Ordering code
(composition see
below)
B32529C6102+***
B32529C6152+***
B32529C6222+***
B32529C6332+***
B32529C6472+***
B32529C6682+***
B32529E6103+***
B32529E6153+***
B32529E6223+***
B32529E6333+***
B32529E6473+***
B32529E6683+***
B32529E6104+***
B32529E6154+***
B32529C8102+***
B32529C8152+***
B32529C8222+***
B32529C8332+***
B32529C8472+***
B32529C8682+***
B32529C8103+***
B32529C8153+***
B32529C8223+***
B32529C8333+***
Ammo
pack
pcs./MOQ
12800
12800
12800
12800
12800
12800
10800
10800
9200
7200
7200
5200
4000
4000
12800
12800
12800
9200
9200
9200
6400
6400
5200
4000
Reel
pcs./
MOQ
11200
11200
11200
11200
11200
11200
9600
9600
8000
6000
6000
4400
3200
3200
11200
11200
11200
8000
8000
8000
5600
5600
4400
3200
Untaped
pcs./
MOQ
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
4000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 9 of 45
B32520
General purpose (stacked)
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
100
63
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
250 160
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
Max. dimensions
w×h×l
mm
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
3.0 × 8.0 × 10.0
4.0 × 8.5 × 10.0
5.0 × 10.5 × 10.0
5.0 × 10.5 × 10.0
6.0 × 12.0 × 10.3
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
3.0 × 8.0 × 10.0
3.0 × 8.0 × 10.0
4.0 × 8.5 × 10.0
5.0 × 10.5 × 10.0
6.0 × 12.0 × 10.3
6.0 × 12.0 × 10.3
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
3.0 × 8.0 × 10.0
4.0 × 8.5 × 10.0
5.0 × 10.5 × 10.0
6.0 × 12.0 × 10.3
Ordering code
(composition see
below)
B32520C0683+***
B32520C0104+***
B32520C0154+***
B32520C0224+***
B32520C0334+***
B32520C0474+***
B32520C0684+***
B32520C0105+***
B32520C0155+***
B32520C0225+***
B32520C1473+***
B32520C1683+***
B32520C1104+***
B32520C1154+***
B32520C1224+***
B32520C1334+***
B32520C1474+***
B32520C1684+***
B32520C1105+***
B32520C3153+***
B32520C3223+***
B32520C3333+***
B32520C3473+***
B32520C3683+***
B32520C3104+***
B32520C3154+***
B32520C3224+***
Ammo
pack
pcs./MOQ
12800
12800
12800
12800
12800
10400
8000
6400
6400
5200
12800
12800
12800
10400
10400
8000
6400
5200
5200
12800
12800
12800
12800
10400
8000
6400
5200
Reel
pcs./
MOQ
11200
11200
11200
11200
11200
9600
7200
5600
5600
4400
11200
11200
11200
9600
9600
7200
5600
4400
4400
11200
11200
11200
11200
9600
7200
5600
4400
Untaped
pcs./
MOQ
10000
10000
10000
10000
10000
8000
6000
4000
4000
3000
10000
10000
10000
8000
8000
6000
4000
3000
3000
10000
10000
10000
10000
8000
6000
4000
3000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 10 of 45
B32520
General purpose (stacked)
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
400 200
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
Max. dimensions
w×h×l
mm
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
2.5 × 7.0 × 10.0
3.0 × 8.0 × 10.0
3.0 × 8.0 × 10.0
4.0 × 8.5 × 10.0
4.0 × 8.5 × 10.0
5.0 × 10.5 × 10.0
5.0 × 10.5 × 10.0
6.0 × 12.0 × 10.3
Ordering code
(composition see
below)
B32520C6102+***
B32520C6152+***
B32520C6222+***
B32520C6332+***
B32520C6472+***
B32520C6682+***
B32520C6103+***
B32520E6153+***
B32520E6223+***
B32520E6333+***
B32520E6473+***
B32520E6683+***
B32520E6104+***
B32520E6154+***
Ammo
pack
pcs./MOQ
12800
12800
12800
12800
12800
12800
12800
10400
10400
8000
8000
6400
6400
5200
Reel
pcs./
MOQ
11200
11200
11200
11200
11200
11200
11200
9600
9600
7200
7200
5600
5600
4400
Untaped
pcs./
MOQ
10000
10000
10000
10000
10000
10000
10000
8000
8000
6000
6000
4000
4000
3000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 11 of 45
B32521
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
0.47
0.68
1.0
1.5
2.2
3.3
100
63
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
250 160
0.010
0.015
0.022
0.033
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.33
0.47
Max. dimensions
w×h×l
mm
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
Ordering code
(composition see
below)
B32521C0474+***
B32521C0684+***
B32521C0105+***
B32521C0155+***
B32521C0225+***
B32521C0335+***
B32521C1473+***
B32521C1683+***
B32521C1104+***
B32521C1154+***
B32521C1224+***
B32521C1334+***
B32521C1474+***
B32521C1684+***
B32521C1105+***
B32521C3103+***
B32521C3153+***
B32521C3223+***
B32521C3333+***
B32521C3473+***
B32521C3563+***
B32521C3683+***
B32521C3823+***
B32521C3104+***
B32521C3124+***
B32521C3154+***
B32521C3184+***
B32521C3224+***
B32521C3334+***
B32521C3474+***
Ammo
pack
pcs./MOQ
4000
4000
4000
3320
3320
2720
4000
4000
4000
4000
4000
4000
4000
3320
2720
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
3320
3320
3320
2720
Reel
pcs./
MOQ
6800
6800
6800
5200
5200
4400
6800
6800
6800
6800
6800
6800
6800
5200
4400
6800
6800
6800
6800
6800
6800
6800
6800
6800
6800
6800
5200
5200
5200
4400
Untaped
pcs./
MOQ
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 12 of 45
B32521
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
400 200
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
630 200
0.010
0.015
0.022
0.033
Max. dimensions
w×h×l
mm
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 7.0 × 13.0
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
Ordering code
(composition see
below)
B32521E6103+***
B32521E6153+***
B32521E6223+***
B32521E6333+***
B32521E6473+***
B32521E6683+***
B32521E6104+***
B32521E6154+***
B32521D8103+***
B32521D8153+***
B32521D8223+***
B32521D8333+***
Ammo
pack
pcs./MOQ
4000
4000
4000
4000
4000
4000
3320
2720
Reel
pcs./
MOQ
6800
6800
6800
6800
6800
6800
5200
4400
6800
6800
5200
5200
Untaped
pcs./
MOQ
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 13 of 45
B32522
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
100
63
0.33
0.47
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
6.8
∇
∇
∇
∇
∇
Max. dimensions
w×h×l
mm
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
7.0 × 12.5 × 18.0
8.5 × 14.5 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
9.0 × 17.5 × 18.0
11.0 × 18.5 × 18.0
11.0 × 18.5 × 18.0
Ordering code
(composition see
below)
B32522C0684+***
B32522C0105+***
B32522C0155+***
B32522C0225+***
B32522C0335+***
B32522C0475+***
B32522C0685+***
B32522C0106+***
B32522C1334+***
B32522C1474+***
B32522C1684+***
B32522C1105+***
B32522Q1105+***
B32522C1155+***
B32522Q1155+***
B32522C1225+***
B32522Q1225+***
B32522C1335+***
B32522Q1335+***
B32522C1475+***
B32522Q1475+***
B32522C1685+***
Ammo
pack
pcs./MOQ
4680
4680
4680
4680
3840
3320
2720
2560
4680
4680
4680
4680
3840
3840
3320
3320
2720
2720
2560
2560
Reel
pcs./
MOQ
5200
5200
5200
5200
4400
3600
2800
2800
5200
5200
5200
5200
4400
4400
3600
3600
2800
2800
2800
2800
2200
Untaped
pcs./
MOQ
4000
4000
4000
4000
4000
4000
2000
2000
4000
4000
4000
4000
4000
4000
4000
4000
2000
2000
2000
2000
1200
1200
∇ Wound capacitor technology
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 14 of 45
B32522
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
250 160
0.10
0.15
0.22
0.33
0.39
0.47
0.56
0.68
1.0
1.0 ∇
1.5
1.5 ∇
2.2
400 200
0.047
0.068
0.10
0.15
0.22
0.33
0.39
0.47
0.56
0.68
1.0
Max. dimensions
w×h×l
mm
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
7.0 × 12.5 × 18.0
8.5 × 14.5 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
9.0 × 17.5 × 18.0
11.0 × 18.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
9.0 × 17.5 × 18.0
9.0 × 17.5 × 18.0
9.0 × 17.5 × 18.0
9.0 × 17.5 × 18.0
5.0 × 10.5 × 18.0
Ordering code
(composition see
below)
B32522C3104+***
B32522C3154+***
B32522C3224+***
B32522C3334+***
B32522C3394+***
B32522C3474+***
B32522C3564+***
B32522C3684+***
B32522C3105+***
B32522N3105+***
B32522C3155+***
B32522N3155+***
B32522C3225+***
B32522E6473+***
B32522E6683+***
B32522E6104+***
B32522E6154+***
B32522E6224+***
B32522E6334+***
B32522E6394+***
B32522E6474+***
B32522E6564+***
B32522E6684+***
B32522E6105+***
Ammo
pack
pcs./MOQ
4680
4680
4680
4680
4680
3840
3320
3320
2720
2720
2560
2560
4680
4680
4680
4680
3840
3320
2560
2560
2560
2560
Reel
pcs./
MOQ
5200
5200
5200
5200
5200
4400
3600
3600
2800
2800
2800
2800
5200
5200
5200
5200
4400
3600
2800
2800
2800
2800
Untaped
pcs./
MOQ
4000
4000
4000
4000
4000
4000
4000
4000
2000
2000
2000
2000
1200
4000
4000
4000
4000
4000
4000
2000
2000
2000
2000
1200
∇ Wound capacitor technology
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 15 of 45
B32522
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
450 200
0.10 ∇
0.15 ∇
0.22 ∇
0.33 ∇
0.47 ∇
0.68 ∇
1.0 ∇
630 200
0.047
0.068
0.10
0.15
0.22
Max. dimensions
w×h×l
mm
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
11.0 × 18.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0
7.0 × 12.5 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
Ordering code
(composition see
below)
B32522N6104+***
B32522N6154+***
B32522N6224+***
B32522N6334+***
B32522N6474+***
B32522N6684+***
B32522N6105+***
B32522D8473+***
B32522D8683+***
B32522D8104+***
B32522D8154+***
B32522D8224+***
Ammo
pack
pcs./MOQ
4680
4680
3840
3320
2720
2560
Reel
pcs./
MOQ
5200
5200
4400
3600
2800
2800
2200
5200
4400
3600
2800
2800
Untaped
pcs./
MOQ
4000
4000
4000
4000
2000
2000
1200
4000
4000
4000
2000
2000
∇ Wound capacitor technology
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 16 of 45
B32523
General purpose (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
3.3
4.7
6.8
10
15
22
100
63
1.5
2.2
3.3
4.7
6.8
10
15
250 160
0.47
0.68
1.0
1.5
2.2
3.3
400 200
0.22
0.33
0.47
0.68
1.0
1.5
630 200
0.10
0.15
0.22
0.33
0.47
0.68
Max. dimensions
w×h×l
mm
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
10.5 × 16.5 × 26.5
12.0 × 22.0 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
8.5 × 16.5 × 26.5
10.5 × 18.5 × 26.5
12.0 × 22.0 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
10.5 × 16.5 × 26.5
11.0 × 20.5 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
8.5 × 16.5 × 26.5
10.5 × 16.5 × 26.5
11.0 × 20.5 × 26.5
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
10.5 × 16.5 × 26.5
10.5 × 20.5 × 26.5
12.0 × 22.0 × 26.5
Ordering code
(composition see
below)
B32523R0335+***
B32523R0475+***
B32523R0685+***
B32523R0106+***
B32523R0156+***
B32523R0226+***
B32523Q1155+***
B32523Q1225+***
B32523Q1335+***
B32523Q1475+***
B32523Q1685+***
B32523Q1106+***
B32523Q1156+***
B32523Q3474+***
B32523Q3684+***
B32523Q3105+***
B32523Q3155+***
B32523Q3225+***
B32523Q3335+***
B32523Q6224+***
B32523Q6334+***
B32523Q6474+***
B32523Q6684+***
B32523Q6105+***
B32523Q6155+***
B32523Q8104+***
B32523Q8154+***
B32523Q8224+***
B32523Q8334+***
B32523Q8474+***
B32523Q8684+***
Ammo
pack
pcs./MOQ
2720
2720
2720
2320
1560
2720
2720
2720
2320
1960
1560
2720
2720
2720
2320
1560
1480
2720
2720
2320
1920
1560
1480
2720
2720
2320
1560
1560
Reel
Untaped
pcs./MOQ
2800
2800
2800
2400
1600
2800
2800
2800
2400
2000
1600
2800
2800
2800
2400
1600
1400
2800
2800
2400
2000
1600
1400
2800
2800
2400
1600
1600
pcs./MOQ
2880
2880
2880
2520
2160
1800
2880
2880
2880
2540
2040
2160
1800
2880
2880
2880
2520
2160
2040
2880
2880
2520
2040
2160
2040
2880
2880
2520
2160
2160
1800
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 17 of 45
B32524
General purpose (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
4.7
6.8
10
15
22
33
47
68
100
100
63
4.7
6.8
10
15
22
33
47
68
250 160
1.5
2.2
3.3
4.7
6.8
10
15
15
15
22
Max. dimensions
w×h×l
mm
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
12.5 × 21.5 × 31.5
18.0 × 27.5 × 31.5
18.0 × 27.5 × 31.5
22.0 × 36.5 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
14.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
21.0 × 31.0 × 31.5
22.0 × 36.5 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
12.5 × 21.5 × 31.5
15.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
18.0 × 27.5 × 31.5
19.0 × 30.0 × 31.5
Ordering code
Ammo
(composition see pack
below)
pcs./MOQ
B32524R0475+*** B32524Q0685+*** B32524R0106+*** B32524R0156+*** B32524R0226+*** B32524R0336+*** B32524R0476+*** B32524R0686+*** B32524R0107+*** B32524Q1475+*** B32524Q1685+*** B32524Q1106+*** B32524Q1156+*** B32524Q1226+*** B32524Q1336+*** B32524Q1476+*** B32524Q1686+*** B32524Q3155+*** B32524Q3225+*** B32524Q3335+*** B32524Q3475+*** B32524R3685+*** B32524R3106+*** B32524R3156M*** B32524R3156J*** B32524R3156K*** B32524R3226+*** Reel
Untaped
pcs./MOQ
1400
1400
1400
1400
1400
1200
1400
1400
1400
1400
1000
1400
1400
1400
1400
1400
1200
pcs./MOQ
1280
1280
1280
1280
1280
1120
800
800
640
1280
1280
1280
1280
1040
800
720
640
1280
1280
1280
1280
1280
1120
960
960
960
720
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 18 of 45
B32524
General purpose (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
250 160
33
400 200
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
630 220
0.33
0.47
0.68
1.0
1.5
2.2
Max. dimensions
w×h×l
mm
22.0 × 36.5 × 31.5
11.0 × 19.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
14.0 × 24.5 × 31.5
14.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
22.0 × 36.5 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
11.0 × 21.0 × 31.5
14.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
21.0 × 31.0 × 31.5
Ordering code
(composition see
below)
B32524R3336+***
B32524Q6684+***
B32524Q6105+***
B32524Q6155+***
B32524R6225+***
B32524R6335+***
B32524R6475+***
B32524R6685+***
B32524R6106+***
B32524Q8334+***
B32524Q8474+***
B32524Q8684+***
B32524Q8105+***
B32524Q8155+***
B32524Q8225+***
Ammo
pack
pcs./MOQ
Reel
Untaped
pcs./MOQ
1400
1400
1400
1400
1000
1000
1400
1400
1400
1000
pcs./MOQ
640
1280
1280
1280
1280
1040
1040
800
640
1280
1280
1280
1040
800
720
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Important notes
at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 1 mm)
Page 19 of 45
B32526
General purpose (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
22
33
47
56
68
82
100
150
220
100
63
15
22
33
33
47
47
68
100
150
250 160
4.7
6.8
10
15
15
22
22
33
47
68
Max. dimensions
w×h×l
mm
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
24.0 × 15.0 × 41.5
16.0 × 28.5 × 41.5
24.0 × 19.0 × 41.5
18.0 × 32.5 × 41.5
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
14.0 × 25.0 × 41.5
24.0 × 15.0 × 41.5
16.0 × 28.5 × 41.5
24.0 × 19.0 × 41.5
18.0 × 32.5 × 41.5
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
14.0 × 25.0 × 41.5
24.0 × 15.0 × 41.5
16.0 × 28.5 × 41.5
24.0 × 19.0 × 41.5
20.0 × 39.5 × 41.5
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
Ordering code
(composition see
below)
B32526R0226+***
B32526R0336+***
B32526R0476+***
B32526T0566+***
B32526R0686+***
B32526T0826+***
B32526R0107+***
B32526R0157+***
B32526R0227A***
B32526R1156+***
B32526R1226+***
B32526R1336+***
B32526T1336+***
B32526R1476+***
B32526T1476+***
B32526R1686+***
B32526R1107+***
B32526R1157+***
B32526R3475+***
B32526R3685+***
B32526R3106+***
B32526R3156+***
B32526T3156+***
B32526R3226+***
B32526T3226+***
B32526R3336+***
B32526R3476+***
B32526R3686+***
Ammo
pack
pcs./MOQ
Reel
Untaped
pcs./MOQ
pcs./MOQ
1620
1620
1620
1040
800
780
720
640
440
1620
1620
1380
1040
800
780
720
640
440
1620
1620
1620
1380
1040
800
780
640
640
440
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
A = 15 ... +5% (220 µF type only)
Please read Important notes
at the end of this document.
*** = Packaging code:
000 = Untaped (standard lead length 6 1 mm)
Page 20 of 45
B32526
General purpose (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
400 200
3.3
4.7
5.6
6.8
8.2
10
15
22
Max. dimensions
w×h×l
mm
12.0 × 22.0 × 41.5
12.0 × 22.0 × 41.5
24.0 × 15.0 × 41.5
14.0 × 25.0 × 41.5
24.0 × 19.0 × 41.5
18.0 × 32.5 × 41.5
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
Ordering code
(composition see
below)
B32526R6335+***
B32526R6475+***
B32526T6565+***
B32526R6685+***
B32526T6825+***
B32526R6106+***
B32526R6156+***
B32526R6226+***
Ammo
pack
pcs./MOQ
Reel
Untaped
pcs./MOQ
pcs./MOQ
1620
1620
1040
1380
780
720
640
440
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
A = 15 ... +5% (220 µF type only)
Please read Important notes
at the end of this document.
*** = Packaging code:
000 = Untaped (standard lead length 6 1 mm)
Page 21 of 45
B32520 ... B32529
General purpose (stacked/wound)
Technical data
Operating temperature range
Max. operating temperature Top,max
Upper category temperature Tmax
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ (in 10-3) at
at 20 °C
(upper limit values)
Insulation resistance Rins
or time constant τ = CR Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
Category voltage VC
(continuous operation with VDC
or VAC at f ≤ 60 Hz)
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 60 Hz)
Damp heat test
Limit values after damp
heat test
Reliability:
Failure rate λ
Service life tSL
Failure criteria:
Total failure
Failure due to variation
of parameters
Please read Important notes
at the end of this document.
CR ≤ 0.1 µF
+125 °C
+125 °C
55 °C
+85 °C
0.1 µF < CR ≤ 1 µF
1 kHz 8
8
10 kHz 15
15
100 kHz 30
VR
CR ≤ 0.33 µF
≤ 100 V DC 3750 MΩ
≥ 250 V DC 7500 MΩ
1.4 VR, 2 s
TA (°C)
DC voltage derating
TA ≤ 85
VC = VR
85<TA≤125 VC = VR (165TA)/80
TA (°C)
DC voltage (max. hours)
TA ≤ 100
Vop = 1.25 VC (2000 h)
100<TA≤125 Vop = 1.25 VC (1000 h)
56 days/40 °C/93% relative humidity
Capacitance change ∆C/C
Dissipation factor change ∆ tan δ
Insulation resistance Rins
or time constant τ = CR Rins
CR > 1 µF
10
CR > 0.33 µF
1250 s
2500 s
AC voltage derating
VC,RMS = VRMS
VC,RMS=VRMS (165TA)/80
AC voltage (max. hours)
Vop = 1.0 VC,RMS (2000 h)
Vop = 1.0 VC,RMS (1000 h)
≤ 5%
≤ 5 10-3 (at 1 kHz)
≥ 50% of minimum
as-delivered values
1 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C
200 000 h at 1.0 VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Short circuit or open circuit
Capacitance change ∆C/C
Dissipation factor tan δ
Insulation resistance Rins
or time constant τ = CR Rins
Page 22 of 45
> 10%
> 2 upper limit value
< 150 MΩ (CR ≤ 0.33 µF)
< 50 s
(CR > 0.33 µF)
B32520 ... B32529
General purpose (stacked/wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 5 mm
7.5 mm
Technology S
S
VR
VRMS
V DC V AC dV/dt in V/µs
50
32 200
63
40 250
120
100
63 300
150
250
160 400
200
400
200 600
275
450
200 630
400 800
S = Stacked, W = Wound
10 mm
S
W
15 mm
S
W
22.5 mm 27.5 mm 37.5 mm
W
W
W
50
75
150
175
320
30
50
100
125
150
3
4
8
10
15
5
10
20
1
3
5
8.5
12
0.8
1
4
6
k0 values
Lead spacing 5 mm
7.5 mm
Technology S
S
VR
VRMS
V DC V AC k0 in V2/µs
50
32
20000
63
40
30000
15000
100
63
60000
30000
250
160
200000 100000
400
200
500000 220000
450
200
630
400 1000000
S = Stacked, W = Wound
Please read Important notes
at the end of this document.
10 mm
S
W
6300
15000
75000
140000
400000
15 mm
S
W
3800
10000
50000
100000
190000
Page 23 of 45
850
5000
15000
22.5 mm 27.5 mm 37.5 mm
W
W
W
375
800
4000
10000
18000
130
600
2500
8500
15000
100
200
2000
6000
B32520 ... B32529
General purpose (stacked/wound)
Impedance Z versus frequency f
(typical values)
Please read Important notes
at the end of this document.
Page 24 of 45
B32529
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 5 mm
50 V DC/32 V AC
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
Please read Important notes
at the end of this document.
Page 25 of 45
B32529
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 5 mm
400 V DC/200 V AC
Please read Important notes
at the end of this document.
630 V DC/400 V AC
Page 26 of 45
B32520
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 27 of 45
B32521
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 28 of 45
B32521
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
630 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 29 of 45
B32522
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 30 of 45
B32522
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
450 V DC/200 V AC
Please read Important notes
at the end of this document.
630 V DC/200 V AC
Page 31 of 45
B32523
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 32 of 45
B32523
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
630 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 33 of 45
B32524
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 34 of 45
B32524
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
630 V DC/220 V AC
Please read Important notes
at the end of this document.
Page 35 of 45
B32526
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Important notes
at the end of this document.
Page 36 of 45
B32520 ... B32529
General purpose (stacked/wound)
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
235 ±5 °C
Soldering time
2.0 ±0.5 s
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Evaluation criteria:
Visual inspection
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
MKP (lead spacing ≤ 7.5 mm)
MKT uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
Please read Important notes
at the end of this document.
Page 37 of 45
10 ±1 s
5 ±1 s
<4s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
B32520 ... B32529
General purpose (stacked/wound)
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Shield
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
∆C/C0
tan δ
Please read Important notes
at the end of this document.
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
Page 38 of 45
B32520 ... B32529
General purpose (stacked/wound)
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable countermeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 °C
MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following measures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Important notes
at the end of this document.
Page 39 of 45
B32520 ... B32529
General purpose (stacked/wound)
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Please read Important notes
at the end of this document.
Safety information
Reference chapter
"General technical
information"
Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Avoid external energy, such as fire or electricity
5.3
(passive flammability), avoid overload of the
"Flammability"
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
5.2
vibration. The capacitors are tested to
"Resistance to vibration"
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Page 40 of 45
B32520 ... B32529
General purpose (stacked/wound)
Topic
Safety information
Soldering
Do not exceed the specified time or temperature
limits during soldering.
Cleaning
Use only suitable solvents for cleaning capacitors.
Embedding of
When embedding finished circuit assemblies in
capacitors in
plastic resins, chemical and thermal influences
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Reference chapter
"Mounting guidelines"
1 "Soldering"
2 "Cleaning"
3 "Embedding of
capacitors in finished
assemblies"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Important notes
at the end of this document.
Page 41 of 45
B32520 ... B32529
General purpose (stacked/wound)
Symbols and terms
Symbol
α
αC
A
βC
C
CR
∆C
∆C/C
∆C/CR
dt
∆t
∆T
∆tan δ
∆V
dV/dt
∆V/∆t
E
ESL
ESR
f
f1
f2
fr
FD
FT
i
IC
English
Heat transfer coefficient
Temperature coefficient of capacitance
Capacitor surface area
Humidity coefficient of capacitance
Capacitance
Rated capacitance
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Capacitance tolerance (relative deviation
from rated capacitance)
Time differential
Time interval
Absolute temperature change
(self-heating)
Absolute change of dissipation factor
Absolute voltage change
Time differential of voltage function (rate
of voltage rise)
Voltage change per time interval
Activation energy for diffusion
Self-inductance
Equivalent series resistance
Frequency
Frequency limit for reducing permissible
AC voltage due to thermal limits
German
Wärmeübergangszahl
Temperaturkoeffizient der Kapazität
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
Nennkapazität
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
Kapazitätstoleranz (relative Abweichung
vom Nennwert)
Differentielle Zeit
Zeitintervall
Absolute Temperaturänderung
(Selbsterwärmung)
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
Differentielle Spannungsänderung
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
Ersatz-Serienwiderstand
Frequenz
Grenzfrequenz für thermisch bedingte
Reduzierung der zulässigen
Wechselspannung
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
Resonant frequency
Resonanzfrequenz
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
Category current (max. continuous
Kategoriestrom (max. Dauerstrom)
current)
Please read Important notes
at the end of this document.
Page 42 of 45
B32520 ... B32529
General purpose (stacked/wound)
Symbol
IRMS
iz
k0
LS
λ
λ0
λtest
Pdiss
Pgen
Q
ρ
R
R
Ri
Rins
RP
RS
S
t
T
τ
tan δ
tan δD
tan δP
tan δS
TA
Tmax
Tmin
tOL
Top
TR
Tref
tSL
VAC
English
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
Pulse characteristic
Series inductance
Failure rate
Constant failure rate during useful
service life
Failure rate, determined by tests
Dissipated power
Generated power
Heat energy
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Temperature
Time constant
Dissipation factor
Dielectric component of dissipation
factor
Parallel component of dissipation factor
Series component of dissipation factor
Ambient temperature
Upper category temperature
Lower category temperature
Operating life at operating temperature
and voltage
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Please read Important notes
at the end of this document.
German
(Sinusförmiger) Wechselstrom
Inkonstanz der Kapazität
Impulskennwert
Serieninduktivität
Ausfallrate
Konstante Ausfallrate in der
Nutzungsphase
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
Innenwiderstand
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
Temperatur
Zeitkonstante
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
Parallelanteil des Verlfustfaktors
Serienanteil des Verlustfaktors
Umgebungstemperatur
Obere Kategorietemperatur
Untere Kategorietemperatur
Betriebszeit bei Betriebstemperatur und
-spannung
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Page 43 of 45
B32520 ... B32529
General purpose (stacked/wound)
Symbol
VC
VC,RMS
English
Category voltage
Category AC voltage
VCD
Vch
VDC
VFB
Vi
Vo
Vop
Vp
Vpp
VR
Corona-discharge onset voltage
Charging voltage
DC voltage
Fly-back capacitor voltage
Input voltage
Output voltage
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Amplitude of rated AC voltage
R
VRMS
German
Kategoriespannung
(Sinusförmige)
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
Gleichspannung
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Impuls-Spitzenspannung
Spannungshub
Nennspannung
Amplitude der Nenn-Wechselspannung
VSC
Vsn
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
Snubber capacitor voltage
Z
Impedance
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Scheinwiderstand
Lead spacing
Rastermaß
Please read Important notes
at the end of this document.
(Sinusförmige) Wechselspannung
Page 44 of 45
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 45 of 45
Similar pages