TOSHIBA TC4584BF_12

TC4584BP/BF
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC4584BP,TC4584BF
TC4584B Hex Schmitt Trigger
The TC4584B is the 6-circuit inverter having the Schmitt
trigger function at the input terminal.
That is, since the circuit threshold level voltages at the leading
and trailing edges of input waveform are different (VP, VN), the
TC4584B can be used in the broad range application including
line receiver, waveform shaping circuit, astable multivibrator,
monostable multivibrator, etc.
In addition to ordinary inverter.
Since the pins are compatible with the TC4069UB, the
substitution is also possible.
TC4584BP
TC4584BF
Pin Assignment
Weight
DIP14-P-300-2.54
SOP14-P-300-1.27A
: 0.96 g (typ.)
: 0.18 g (typ.)
Logic Diagram
Input/Output Voltage Characteristic
Input-Output
Voltage Waveform
Transfer
Characteristics
1
2012-02-29
TC4584BP/BF
Absolute Maximum Ratings (Note)
Characteristics
Symbol
Rating
Unit
DC supply voltage
VDD
VSS − 0.5~VSS + 20
V
Input voltage
VIN
VSS − 0.5~VDD + 0.5
V
VOUT
VSS − 0.5~VDD + 0.5
V
Output voltage
DC input current
IIN
±10
mA
Power dissipation
PD
300 (DIP)/180 (SOIC)
mW
Operating temperature range
Topr
−40~85
°C
Storage temperature range
Tstg
−65~150
°C
Note:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (VSS = 0 V) (Note)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
DC supply voltage
VDD
⎯
3
⎯
18
V
Input voltage
VIN
⎯
0
⎯
VDD
V
Note 1: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VDD or VSS.
2
2012-02-29
TC4584BP/BF
Static Electrical Characteristics (VSS = 0 V)
Characteristics
High-level output
voltage
Low-level output
voltage
Symbol
VOH
VOL
IOH
25°C
85°C
VDD
(V)
Min
Max
Min
Typ.
Max
Min
Max
5
4.95
⎯
4.95
5.00
⎯
4.95
⎯
10
9.95
⎯
9.95
10.00
⎯
9.95
⎯
15
14.95
⎯
14.95
15.00
⎯
14.95
⎯
5
⎯
0.05
⎯
0.00
0.05
⎯
0.05
10
⎯
0.05
⎯
0.00
0.05
⎯
0.05
15
⎯
0.05
⎯
0.00
0.05
⎯
0.05
5
−0.61
⎯
−0.51
−1.0
⎯
−0.42
⎯
VOH = 2.5 V
5
−2.50
⎯
−2.10
−4.0
⎯
−1.70
⎯
VOH = 9.5 V
10
−1.50
⎯
−1.30
−2.2
⎯
−1.10
⎯
VOH = 13.5 V
15
−4.00
⎯
−3.40
−9.0
⎯
−2.80
⎯
VOL = 0.4 V
5
0.61
⎯
0.51
1.5
⎯
0.42
⎯
VOL = 0.5 V
10
1.50
⎯
1.30
3.8
⎯
1.10
⎯
VOL = 1.5 V
15
4.00
⎯
3.40
15.0
⎯
2.80
⎯
VOUT = 0.5 V
5
2.05
3.75
2.15
3.0
3.75
2.15
3.85
VOUT = 1.0 V
10
4.80
7.60
4.90
6.4
7.60
4.90
7.70
VOUT = 1.5 V
15
7.80
11.60
7.90
9.9
11.60
7.90
11.70
⎪IOUT⎪ < 1 μA
VIN = VSS, VDD
⎪IOUT⎪ < 1 μA
VIN = VSS, VDD
VOH = 4.6 V
Output high current
−40°C
Test Condition
Unit
V
V
mA
VIN = VSS
Output low current
IOL
mA
VIN = VDD
Positive trigger
threshold voltage
Negative trigger
threshold voltage
Hysteresis voltage
Input
current
“H” level
“L” level
Quiescent supply
current
VP
VN
VOUT = 4.5 V
5
1.25
2.95
1.25
2.3
2.85
1.15
2.85
VOUT = 9.0 V
10
2.40
5.20
2.40
3.8
5.10
2.30
5.10
VOUT = 13.5 V
15
3.40
7.20
3.40
5.2
7.10
3.30
7.10
5
0.10
1.25
0.25
0.65
1.25
0.25
1.40
10
1.80
3.50
1.90
2.60
3.50
1.90
3.60
15
3.70
5.60
3.80
4.70
5.60
3.80
5.70
0.1
⎯
1.0
−0.1
⎯
−1.0
⎯
VH
IIH
IIL
IDD
VIH = 18 V
18
VIL = 0 V
VIN = VSS, VDD
(Note)
⎯
0.1
⎯
10
−5
−5
18
⎯
−0.1
⎯
−10
5
⎯
1
⎯
0.001
1
⎯
7.5
10
⎯
2
⎯
0.002
2
⎯
15.0
15
⎯
4
⎯
0.004
4
⎯
30.0
V
V
V
μA
μA
Note: All valid input combinations.
3
2012-02-29
TC4584BP/BF
Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF)
Characteristics
Output transition time
(low to high)
Output transition time
(high to low)
Propagation delay time
Input capacitance
Test Condition
Symbol
VDD (V)
⎯
tTLH
⎯
tTHL
tpLH
⎯
tpHL
⎯
CIN
Min
Typ.
Max
5
⎯
80
200
10
⎯
50
100
15
⎯
40
80
5
⎯
80
200
10
⎯
50
100
15
⎯
40
80
5
⎯
170
340
10
⎯
80
160
15
⎯
60
120
⎯
5
7.5
Unit
ns
ns
ns
pF
Circuit and Waveform for Measurement of Dynamic Characteristics
Circuit
Waveform
4
2012-02-29
TC4584BP/BF
Package Dimensions
Weight: 0.96 g (typ.)
5
2012-02-29
TC4584BP/BF
Package Dimensions
Weight: 0.18 g (typ.)
6
2012-02-29
TC4584BP/BF
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
7
2012-02-29