STMicroelectronics BTB06-600CWRG Snubberlessâ ¢, logic level & standard Datasheet

BTA/BTB06 Series
®
6A TRIACS
SNUBBERLESS™, LOGIC LEVEL & STANDARD
MAIN FEATURES:
A2
Symbol
Value
Unit
IT(RMS)
6
A
VDRM/VRRM
600 and 800
V
IG (Q1)
5 to 50
G
A1
A2
mA
DESCRIPTION
Suitable for AC switching operations, the BTA/
BTB06 series can be used as an ON/OFF function
in applications such as static relays, heating
regulation, induction motor starting circuits... or for
phase control in light dimmers, motor speed
controllers,...
The snubberless and logic level versions (BTA/
BTB...W) are specially recommended for use on
inductive loads, thanks to their high commutation
performances. By using an internal ceramic pad,
the BTA series provides voltage insulated tab
(rated at 2500V RMS) complying with UL
standards (File ref.: E81734)
A1
A2
G
A1
A2
G
TO-220AB
(BTB06)
TO-220AB Insulated
(BTA06)
ABSOLUTE MAXIMUM RATINGS
Symbol
IT(RMS)
ITSM
I ²t
Parameter
RMS on-state current (full sine wave)
Value
TO-220AB
Tc = 110°C
Unit
A
6
Non repetitive surge peak on-state
current (full cycle, Tj initial = 25°C)
I²t Value for fusing
TO-220AB Ins.
Tc = 105°C
F = 50 Hz
t = 20 ms
60
F = 60 Hz
t = 16.7 ms
63
tp = 10 ms
A
21
A² s
dI/dt
Critical rate of rise of on-state current
IG = 2 x IGT , tr ≤ 100 ns
F = 120 Hz
Tj = 125°C
50
A/µs
IGM
Peak gate current
tp = 20 µs
Tj = 125°C
4
A
Tj = 125°C
1
W
- 40 to + 150
- 40 to + 125
°C
PG(AV)
Tstg
Tj
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
April 2002 - Ed: 5A
1/6
BTA/BTB06 Series
ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified)
■
SNUBBERLESS™ and LOGIC LEVEL (3 Quadrants)
Symbol
IGT (1)
VGT
Test Conditions
Quadrant
RL = 30 Ω
VD = 12 V
VGD
VD = VDRM RL = 3.3 kΩ
Tj = 125°C
IH (2)
IT = 100 mA
IL
IG = 1.2 IGT
BTA/BTB06
SW
CW
BW
5
10
35
50
I - II - III
MAX.
I - II - III
MAX.
1.3
I - II - III
MIN.
0.2
I - III
(dI/dt)c (2)
■
mA
V
V
MAX.
10
15
35
50
mA
MAX.
10
25
50
70
mA
15
30
60
80
II
dV/dt (2)
Unit
TW
VD = 67 %VDRM gate open
Tj = 125°C
MIN.
20
40
400
1000
V/µs
(dV/dt)c = 0.1 V/µs
MIN.
2.7
3.5
-
-
A/ms
Tj = 125°C
(dV/dt)c = 10 V/µs
Tj = 125°C
1.2
2.4
-
-
Without snubber
Tj = 125°C
-
-
3.5
5.3
STANDARD (4 Quadrants)
Symbol
Test Conditions
IG (1)
VD = 12 V
Quadrant
RL = 30 Ω
VGT
VGD
VD = VDRM RL = 3.3 kΩ Tj = 125°C
IH (2)
IT = 500 mA
IL
IG = 1.2 IGT
BTA/BTB06
B
25
50
50
100
Unit
I - II - III
IV
MAX.
ALL
MAX.
1.3
V
ALL
MIN.
0.2
V
mA
MAX.
25
50
mA
MAX.
40
50
mA
80
100
VD = 67 %VDRM gate open Tj = 125°C
MIN.
200
400
V/µs
Tj = 125°C
MIN.
5
10
V/µs
I - III - IV
II
dV/dt (2)
C
(dV/dt)c (2) (dI/dt)c = 2.7 A/ms
STATIC CHARACTERISTICS
Symbol
VT (2)
Test Conditions
ITM = 5.5 A
tp = 380 µs
Unit
MAX.
1.55
V
Vto (2)
Threshold voltage
Tj = 125°C
MAX.
0.85
V
Rd (2)
Dynamic resistance
Tj = 125°C
MAX.
60
mΩ
IDRM
VDRM = VRRM
Tj = 25°C
5
µA
1
mA
IRRM
Note 1: minimum IGT is guaranted at 5% of IGT max.
Note 2: for both polarities of A2 referenced to A1
2/6
Tj = 25°C
Value
Tj = 125°C
MAX.
BTA/BTB06 Series
THERMAL RESISTANCES
Symbol
Rth(j-c)
Rth(j-a)
Parameter
Junction to case (AC)
Junction to ambient
Value
Unit
°C/W
TO-220AB
1.8
TO-220AB Insulated
2.7
TO-220AB
TO-220AB Insulated
60
°C/W
PRODUCT SELECTOR
Voltage (xxx)
Sensitivity
Type
Package
X
50 mA
Standard
TO-220AB
X
X
50 mA
Snubberless
TO-220AB
BTA/BTB06-xxxC
X
X
25 mA
Standard
TO-220AB
BTA/BTB06-xxxCW
X
X
35 mA
Snubberless
TO-220AB
BTA/BTB06-xxxSW
X
X
10 mA
Logic level
TO-220AB
BTA/BTB06-xxxTW
X
X
5 mA
Logic level
TO-220AB
Part Number
600 V
800 V
BTA/BTB06-xxxB
X
BTA/BTB06-xxxBW
BTB: non insulated TO-220AB package
ORDERING INFORMATION
BT A 06 -
600
BW
(RG)
TRIAC
SERIES
INSULATION:
A: insulated
B: non insulated
VOLTAGE:
600: 600V
800: 800V
CURRENT: 6A
SENSITIVITY & TYPE
B: 50mA STANDARD
BW: 50mA SNUBBERLESS
C: 25mA STANDARD
CW: 35mA SNUBBERLESS
SW: 10mA LOGIC LEVEL
TW: 5mA LOGIC LEVEL
PACKING MODE
Blank: Bulk
RG: Tube
OTHER INFORMATION
Part Number
Marking
Weight
Base
quantity
Packing
mode
BTA/BTB06-xxxyz
BTA/BTB06-xxxyz
2.3 g
250
Bulk
BTA/BTB06-xxxyzRG
BTA/BTB06-xxxyz
2.3 g
50
Tube
Note: xxx = voltage, y = sensitivity, z = type
3/6
BTA/BTB06 Series
Fig. 1: Maximum power dissipation versus RMS
on-state current (full cycle).
Fig. 2: RMS on-state current versus case
temperature (full cycle).
P (W)
IT(RMS) (A)
8
7
7
6
BTB
6
BTA
5
5
4
4
3
3
2
2
0
1
IT(RMS)(A)
1
0
1
2
3
4
5
6
Fig. 3: Relative variation of thermal impedance
versus pulse duration.
0
Tc(°C)
0
25
Fig. 4:
values).
50
On-state
75
100
characteristics
125
(maximum
ITM (A)
K=[Zth/Rth]
100
1E+0
Tj max.
Vto = 0.85 V
Rd = 60 mΩ
Zth(j-c)
1E-1
Tj=Tj max
10
Zth(j-a)
VTM(V)
tp(s)
1E-2
1E-3
1E-2
1E-1
1E+0
1E+1
1E+2 5E+2
Fig. 5: Surge peak on-state current versus
number of cycles.
1
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Fig. 6: Non-repetitive surge peak on-state
current for a sinusoidal pulse with width
tp < 10ms, and corresponding value of I²t.
ITSM (A), I²t (A²s)
ITSM (A)
1000
70
60
Tj initial=25°C
t=20ms
50
dI/dt limitation:
50A/µs
One cycle
ITSM
Non repetitive
Tj initial=25°C
40
100
30
Repetitive
Tc=105°C
20
I²t
10
0
tp (ms)
Number of cycles
1
4/6
10
100
1000
10
0.01
0.10
1.00
10.00
BTA/BTB06 Series
Fig. 7: Relative variation of gate trigger current,
holding current and latching current versus
junction temperature (typical values).
Fig. 8-1: Relative variation of critical rate of
decrease of main current versus (dV/dt)c (typical
values). Snubberless & Logic Level Types
IGT,IH,IL[Tj] / IGT,IH,IL [Tj=25°C]
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c
2.5
2.0
IGT
1.5
IH & IL
1.0
0.5
Tj(°C)
0.0
-40
-20
0
20
40
60
80
100
120
140
Fig. 8-2: Relative variation of critical rate of
decrease of main current versus (dV/dt)c (typical
values). Standard Types
2.4
2.2
2.0
1.8
1.6
1.4 SW
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.1
BW/CW
(dV/dt)c (V/µs)
1.0
10.0
100.0
Fig. 9: Relative variation of critical rate of
decrease of main current versus junction
temperature.
(dI/dt)c [Tj] / (dI/dt)c [Tj specified]
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c
2.0
1.8 C
1.6
1.4
B
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.1
TW
6
5
4
3
2
1
(dV/dt)c (V/µs)
1.0
Tj(°C)
10.0
100.0
0
0
25
50
75
100
125
5/6
BTA/BTB06 Series
PACKAGE MECHANICAL DATA
TO-220AB / TO-220AB Ins.
DIMENSIONS
B
REF.
C
Millimeters
Inches
b2
Min.
L
F
I
A
l4
c2
a1
l3
l2
a2
b1
M
c1
e
A
a1
a2
B
b1
b2
C
c1
c2
e
F
I
I4
L
l2
l3
M
Typ.
15.20
Max.
Min.
Typ.
15.90 0.598
3.75
Max.
0.625
0.147
13.00
14.00 0.511
0.551
10.00
10.40 0.393
0.409
0.61
0.88 0.024
0.034
1.23
1.32 0.048
0.051
4.40
4.60 0.173
0.181
0.49
0.70 0.019
0.027
2.40
2.72 0.094
0.107
2.40
2.70 0.094
0.106
6.20
6.60 0.244
0.259
3.75
3.85 0.147
0.151
15.80 16.40 16.80 0.622 0.646 0.661
2.65
2.95 0.104
0.116
1.14
1.70 0.044
0.066
1.14
1.70 0.044
0.066
2.60
0.102
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2002 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany
Hong Kong - India - Isreal - Italy - Japan - Malaysia - Malta - Morocco - Singapore
Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
6/6
Similar pages