Vishay CAR0812FP 850 watt 12v front end power supply Datasheet

CAR0812FP Series
850 Watt +12V Front End Power Supply
Features:
∎ Compact 1U Profile
∎ High Efficiency design optimized for mid to light load applications
∎ Constant Current Characteristic
∎ N+1 Redundancy with Warm Plug Capability (IEC-320 AC Inlet)
∎ High Power Density (18W/in3)
∎ 3.3VSB, Active Load Sharing, I²C and PMBus standard Interface,
Remote On/Off and Remote Sense functions
FEATURES
BENEFITS
High Power Density 18W/in3
More system space for application circuits and hardware
Load Sharing & Fault Tolerant
Excellent reliability in N+1 operation
KEY MARKET SEGMENTS & APPLICATIONS
∎ Distributed Power
Blade Servers
Network Equipment
Automatic Fan Speed Control
Reduces audible noise and increases reliability
∎ Mid-End Servers
System Scalability up to 3.2kW
Allows flexibility with minimum investment
∎ Network Attached Storage
Universal Input & International
Certifications
Reduces logistical costs
∎ Storage Area Networks
SPECIFICATIONS
850 Watt +12V Front End Power Supply
Input Voltage Range
85-264 VAC, 47-63 Hz, derate to 750W for <90VAC Input
Input Current Maximum
11A (full load, Vin = 100Vac) / 12A (full load, Vin = 90Vac)
Inrush Current
40A max. cold start (Measured at 25ºC for all line conditions typical duration 10ms)
Input Protection
Single fuse (line) – 15A & 250Vac (Type 3AB Axial)
Power Factor
0.99 typical at full load, complies with IEC555, EN60555-2, EN61000-3-2
Efficiency
Up to 92.5% Efficiency at 50% Load and 230 VAC Operation
Output Power
850W derate to 750W for <90VAC Input
Output Voltage Range
10.8~13.2 VDC with remote programming
Output Current
71.0A @ 12V (no minimum load required)
Standby Bias Voltage
3.3VSB@1A (optional 5Vsb)
Voltage Regulation
±2% of Vnom for any combination of line, load and temperature
Output Ripple & Noise
1% (pk-pk) @ 20MHz with 0.1μF ceramic and 10μF electrolytic caps at the output
Transient Response
5% max deviation Recovery time 500μs @ 50% load step and di/dt < 1A/μs (for system loads >10%)
Hold-Up Time
12ms at 850W typical (Early Warning: 2ms)
Remote On/Off
ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type
Current Limit Protection
Adjustable via I²C interface or PMBus, Constant current characteristic & power limited to 850W
Short Circuit Protection
Self protected with auto recovery
Over Voltage Protection
Trip level >+14.8Vdc ± 1V, Reset condition by recycling the AC input or applying Remote ON/OFF
Operating Temperature
-10°C to +70°C. derate above 50°C at 2.5%/°C (startup -40° C, meet specified spec with 30min. warm period)
Over Temperature Protection
Non-Latching, thermal shutdown point is set for 125°C and recovery point is 110°C
EMI
FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE
LED Indicators
AC OK (Green) / DC OK (Green) / Thermal Alarm (Orange) / Fault (Red), “All on one LED” Tri-color LED
Analog Status & Control
Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), AC OK,
DC OK, Temperature Warning, Fault, PS Present, Module Enable
Digital Status & Control
I2C Option and PMBus, see detailed specification for details
Shock & Vibration
NEBS GR-63-CORE Level 3
Dimensions
8.73 x 3.38 x 1.61” / 221.7 x 85.9 x 40.9mm
Weight
4.28 lb. / 1.94 kg.
Safety Approvals
IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV
rev 100728
www.lineagepower.com/oem
Lineage Power
Lineage Power
Lineage Power (China)
601 Shiloh Rd.
Plano, TX 75074
Phone: +1.972.244.9722
2841 Dow Avenue
Tustin, CA 92780 USA
Phone: +1.714.544 6665
3F, #9 Building, #456 Hong Cao Road
Shanghai 200233, China
Phone: +86.021.54279977*808
CAR0812FP Series
850 Watt +12V Front End Power Supply
OUTLINE DRAWING
All Dimensions in Inches (mm)
Tolerance: .XX = ± .02 in (.50 mm)
.XXX = ± .010 in (.254 mm)
EFFICIENCY CURVE:
100%
Efficiency
90% 91%
90%
82.5%
80%
83%
CONNECTOR DRAWING:
92.5%
91%
90%
1
2
3
4
5
6
D
88% 89%
90%
89%
C
87%
P1
P2
P3
P4
B
A
230 VAC
115 VAC
70%
FCI Berg P/N: 51722-10402400ABLF / Lineage Power Part Number 822024
Mating connector: 51762-10402400ABLF / Lineage Power Part number 822089
60%
0%
10%
20% 30%
50%
75%
100%
Load
PART NUMBER DEFINITION GUIDE:
Example:
CAR0812FPBZ0-1A
850W/12V Front End, Bezel, 6 of 6 RoHS
PIN OUT INFORMATION
A1
VSB 3.3V
B4
PS Present
A2
VSB 3.3V Return
B5
SDA (I2C bus)
D2
N/A
P2
+Vout
A3
Signal Return
B6
SCL (I2C bus)
D3
Remote ON/OFF
P3
Output Return
A4
Write Protect
C1
ISHARE
D4
DC OK
P4
Output Return
A5
Remote Sense +
C2
N/C
D5
AC OK
A6
Remote Sense -
C3
N/A
D6
Interrupt
(/SM BALERT)
B1
Fault
C4
I2C Address (A0)
B2
N/A
C5
I2C Address (A1)
B3
Module Enable
C6
I2C Address (A2)
rev 100728
D1
VProg
P1
+Vout
www.lineagepower.com/oem
Lineage Power
Lineage Power
Lineage Power (China)
601 Shiloh Rd.
Plano, TX 75074
Phone: +1.972.244.9722
2841 Dow Avenue
Tustin, CA 92780 USA
Phone: +1.714.544 6665
3F, #9 Building, #456 Hong Cao Road
Shanghai 200233, China
Phone: +86.021.54279977*808
Similar pages